This study focused on the efficiency of concrete beams containing polyvinyl alcohol fibers (PVA) under thermal loads. The eighteen concrete beams were reinforced with hybrid bars or a combination of GFRP bars and steel reinforcement bars (hybrid scheme). The main experimental variables were the level of temperature (25o, 300o, and 600o C), PVA fiber volume (0 %, 0.50 %, and 1.0 %), and the flexural reinforcement bars. The experimental test results are discussed in terms of the first crack load, flexural capacity, and load-deflection curves. Moreover, the initial and post-crack stiffness, ductility factor, and failure modes are discussed. The test results demonstrated a significant increase in the capacity of PVA concrete beams reinforced with hybrid reinforcement bars. At a temperature of 300o C, the inclusion of 0.50 % and 1.0 % PVA ratios improved the flexural capacities by 11 % and 24 %, respectively. Furthermore, the addition of PVA fibers enhanced the toughness by 34 % and 67 %, respectively, when compared to normal concrete beams. The results also demonstrate that using PVA fibers prevents the spalling of concrete beams after exposure to elevated temperatures. At 600 °C, beams containing 0.50 % and 1.0 % PVA fibers exhibited flexural capacities that were 9 % and 6 % higher, respectively, compared to normal concrete beams. Additionally, the inclusion of PVA fibers increased the toughness by 27 % and 21 % for the respective fiber ratios. Finally, a nonlinear finite element analysis (NLFEA) simulation was performed to verify the experimental test results and supplement experiments by predicting the results that are difficult to accomplish through experiments. With an average ratio of 1.02 between experimental and NLFEA ultimate capacity, the numerical results were an exact match of the patterns observed in the experimental results. |
