Winglets (WLs) have recently been used to improve the performance of horizontal axis wind turbine (HAWT). The WL geometry is a key parameter for diverging blade tip vortices away from turbine blades and reducing induced drag. The present study focuses on the effect of winglet height (H ) and toe angle (α w) on the turbine performance. The performance of a three‐bladed rotor of 1 m diameter with SD8000 aerofoil is numerically investigated using ANSYS 17.2 CFD on a polyhedral mesh. The model is hence validated by comparing results for power coefficient (C pw) with experimental values available in the literature. Four different values of H are considered while keeping αw constant at 0°. H of 0.8%R is proved to be the best height for performance enhancement. It increases C pw by 2.4% at tip speed ratio λ = 7. The toe angle effect is studied for upwind and downwind WLs. The results show that C pw increases as α w increases up to α w = +20° at all values of λ . C pw increases by 6% at λ = 7. Downwind WL always reduces C pw. The present results are well explained by the resulting vectors map near the blade tip. Using WL with the optimum H and α w, causes 6% increase in C pw as compared to rotor without WL. |
