You are in:Home/Publications/Strengthening of Unreinforced Masonry Vaults Using FRP Composites

Prof. Mohamed Osama Ramadan Al Hariri :: Publications:

Title:
Strengthening of Unreinforced Masonry Vaults Using FRP Composites
Authors: 4- Osama A. Kamal, Osama. R. Al Hariri, Gehan A. Hamdy, Tarik S. El-Salakawy
Year: 2014
Keywords: Not Available
Journal: Not Available
Volume: Not Available
Issue: Not Available
Pages: Not Available
Publisher: Not Available
Local/International: Local
Paper Link:
Full paper Not Available
Supplementary materials Not Available
Abstract:

Unreinforced masonry is the construction system in most of the historic structures and a considerable percentage of existing residential buildings in Egypt. One of the important disadvantages of unreinforced masonry construction is its low resistance to tensile stresses and lateral loads, so there is a need for appropriate strengthening. Fiber reinforced polymer (FRP) composites have been successfully applied as externally bonded reinforcement for strengthening of reinforced concrete and masonry structural elements. Their excellent strength-to-weight ratio and ease of installation make it an attractive alternative for traditional strengthening methods. This paper presents experimental investigation of strengthening masonry wallets and vaults using FRP composites, as well as other traditional methods such as steel reinforcement bars, ferrocement layers and polymer mortar layers. The experimental results showed that FRP gave higher strengthening level and better failure mode than using traditional steel reinforcement bars or ferrocement layers. Use of glass fiber composites is also a cheap technique. Using polymer mortar was the least effective technique. Strengthening of masonry wallets using FRP surface layer was found to be an efficient method, where the failure load was double that of the control sample.

Google ScholarAcdemia.eduResearch GateLinkedinFacebookTwitterGoogle PlusYoutubeWordpressInstagramMendeleyZoteroEvernoteORCIDScopus