MOHAMED Anwer Kamel RADY|Publications

You are in:Home/Publications
Prof. MOHAMED Anwer Kamel RADY :: Publications:

Research Fields

heat

solidification

convection

energy storage

alloy

natural convection

mass transfer

Number of publications is 43

Title

1-Experimental and numerical investigations on the performance of dehumidifying desiccant beds composed of silica-gel and thermal energy storage particles, Heat and Mass transfer, Vol. 45, pp. 545-561.

2-Study of heat and mass transfer in a dehumidifying desiccant bed with macro-encapsulated phase change materials, Renewable Energy, 34, pp. 718–726

3-Characterization of granular phase changing composites for thermal energy storage using the T-history method, International Journal of Energy Research, DOI: 10.1002/er.1560.

4-Heat and mass transfer in a composite bed of silica gel and macro-encapsulated PCM for dehumidification, EUROTHERM , Indohoven, Netherlands.

5-Convection Phenomenon in mineral wool installed on vertical walls, Building Physics Symposium, 29-31 Oct., Katholieke Universitiet, Belgium.

6-Détermination des conditions de contact de milieux avec cinétique de solidification rapide. Congrès français de Thermique, Société Française de Thermique. Toulouse.

7-Determination of Two media contact conditions during rapid solidification : Application for droplet impact and solidification 22^nd European Conference on Liquid Atomization and Spray Systems, Como Lake, Italy.

8-Thermal Energy Storage Systems for Electricity Production Using Solar Energy Direct Steam Generation Technology, Chemical Engineering and Processing, vol. 47, pp. 499-507.

9-Etude des transferts de masse et de chaleur dans un lit déshumidificateur déshydratant à matériau à changement de phase macroencapsulé, 8th JEMP, Lyon, France.

10-A numerical investigation and parametric study of cooling an array of multiple protruding heat sources by a laminar slot air jet, International Journal of Heat and Fluid Flow, Volume 28, Issue 4, pp. 787-805.

11-Numerical approaches for microscopic modelling of solute redistribution during solidification of binary alloys, Heat and Mass Transfer, 42: 347–358.

12-Heat transfer enhancement of multiple impinging slot jets with symmetric exhaust ports and confinement surface, Applied Thermal Engineering, Vol. 26, 1310-1319.

13-Heat transfer enhancement of multiple impinging slot jets with symmetric exhaust ports and confinement surface, Applied Thermal Engineering, Vol. 26, 1310-1319.

14-A micro/macro model for numerical simulation of dendritic alloy soldification, Modeling of Casting, Welding and Advanced Solidification Processes XI MCWASP Conference, Opio, France, May.

15-Convection naturelle dans des systèmes mixtes fluide-poreux de grande extension : application à l’isolation de l’habitat, Congrès Français de Thermique, SFT 2006, Île de Ré, 16-19 mai.

16-Etude de l’ascension d’un glaçon sphérique au sein d’une colonne d’eau, Congrès Français de Thermique, SFT 2006, Île de Ré, 16-19 mai .

17-A dual-scale coupled micro/macro segregation model for dendritic alloy solidification, Heat Mass Transfer , 42, 1129-1141.

18-Convection phenomenon in mineral wool installed on vertical walls, Int. Congres “New Tendances in Thermal Insulation of Buildings, Moscou (Russie), 7-10 Novembre.

19-Heat transfer modelling within graphite/PCM composite materials for high temperature energy storage, Ecostock 2006, The tenth international conference on thermal energy storage, May 31 –June 2,at the Richard Stockton College of New Jersy, USA.

20-Effects of exhaust port geometry and confinement surface protrusions on heat transfer behavior of impinging slot jets,4th International conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Cairo-Egypt.

21-On the numerical modeling of alloy solidification using a single-domain coupled dual-scale model, 4th International conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Cairo-Egypt.

22-Systèmes de stockage d’énergie thermique couplés à la production d’électricité par des technologies solaires thermodynamiques, Récents Progrès en Génie des Procédés, Numéro 92.

23-Natural convection melting of ice spheres in water filled cylindrical enclosures, 4th ICCHMT-Paris, Progress in computational heat and mass transfer, Vol. 2, pp. 1113-1118.

24-A fixed domain model for microsegregation during alloy solidification, Heat and Mass Transfer, Vol. 41, pp. 545-558.

25-Study of natural convection heat transfer in a finned horizontal fluid layer, International Journal of Thermal Sciences,Vol. 44, pp. 43-52.

26-Numerical approaches for microsegregation modelling during alloy solidification, Poster session, International conference of crystal growth, Grenoble, France, August.

27-Numerical simulation of microsegregation during dendritic solidification of binary alloys, Journal of Engineering Sciences, Faculty of Engineering, University of Assiut, Egypt, Vol. 32, No. 3, pp. 1147-1168.

28-Fusion d’une particule en "sédimentation", Congrès Français de Thermique, Presqu île de Giens, 25-28 Mai, SFT , Volume 1, pp.149-154.

29-Cooling an array of multiple heat sources by a row of slot air jets, Journal of Engineering Sciences, Faculty of Engineering, University of Assiut, Egypt, Vol. 32, No. 2, pp. 837-858.

30-Performance and emission characteristics of Diesel engine using blends of jojoba oil and jojoba methyl ester with gas oil, Journal of Engineering Sciences, Faculty of Engineering, Ain Shams University, Egypt, Vol. 39, No. 2, pp. 473-495.

31-Experimental Evaluation of Diesel Engine Performance and emission using blends of jojoba oil and Diesel fuel, Energy Conversion and Management, Vol. 45 , pp.2093-2112.

32-Experimental investigation of free convection from a horizontal semicircular cylinder at different orientations, Journal of Engineering Sciences, Assuit University, Vol. 30, No. 3, pp.731-744.

33-A study on the performance of convection schemes using a unified control-volume formulation, 2nd Minia International conference for Advanced Trends in Engineering, 7-9 April.

34-An experimental study of fluid flow characteristics around a semi-circular tube, Proceeding of the 10th Int. AMME conference, 14-16 May, pp.625-636.

35-Buoyancy effects on the flow and heat transfer characteristics of an impinging semi-confined laminar slot jet, Int. J. of Transport Phenomena, Vol. 2, pp.113-126.

36-Solidification of hypereutectic and hypoeutectic binary alloys with buoyancy and surface tension driven natural convection, Heat and Mass Transfer, Vol. 34, pp.337-347.

37-Thermosolutal convection and macrosegregation during solidification of hypereutectic and hypoeutectic binary alloys in statically cast trapezoidal ingots, Metallurgical and Materials Transactions, Vol. 28 B, pp.943-954

38-Effects of liquid superheat during solidification of pure metals in a square cavity, Heat and Mass Transfer, Vol. 32, pp.499-509.

39-Natural convection during melting and solidification of pure metals in a cavity, Numerical Heat Transfer, Part A, Vol. 29, pp.49-63.

40-Thermally Buoyant combined convection of saline water through vertical pipes, IDA World Congress, Abu Dhabi.

41-Single domain analysis of natural convection during melting and solidification of pure metals, ISHMT conference, pp.297-302, Surathkal, Karnatka, India.

42-A Simulation Model for Natural Circulation Solar Energy Water Heaters, International Solar Energy Conference, Solar Energy Society, Cairo,Egypt

43-Effect of Tank Elevation on Natural Circulation Solar Energy Water Heaters, International Solar Energy Conference, Solar Energy Society, Cairo, Egypt.

Prof. MOHAMED Anwer Kamel RADY :: Publications: