The aim of this research was to test and calibrate some water flow
measurement devices, which were appropriate for on-farm management
in Egypt. To fulfill this purpose, three of the common water- flow
measurement devices (v-notch, rectangular weir and cutthroat flume)
were calibrated in the Laboratory of Hydraulics Research Institute in
Qanater City (Egypt, القناطر ). The calibration was carried out using an
ultrasonic flow- meter.
Results of this study showed that under low discharges, i.e. 5 and 10 Ls-1,
the most accurate device was the v-notch, under high discharges 15, 20,
25, 30 and 35 L s-1, the most accurate one was the rectangular weir.
Increasing discharge rate from 5 to 35 L s-1 resulted in increases in error
percentage in the readings of the v-notch. On the other hand, the
corresponding error percentages in readings of both the rectangular weir
and the cutthroat flume were obviously decreased. The decreases seemed
inversely related to the increase in rate of discharge. Effect of time
interval on error percentage seemed to be irregular. From the
aforementioned results, it could be deduced that the v-notch weir is
preferable for measuring the discharge at a rate ranging from 5 to 10 L
s-1, beyond which the rectangular weir, as well as the cutthroat flume,
would be preferable |
