Tarek Ahmed Fouad Khalifa|Publications

You are in:Home/Publications
Prof. Tarek Ahmed Fouad Khalifa :: Publications:

Research Fields

steel

fatigue

carbon steel

Mechanical Properties

fatigue behaviour

Stainless Steel

low carbon

Number of publications is 50

Title

1-Tensile and Creep Behavior of Extruded AA6063/SiCp Al MMCs

2-Effect of Ageing on the Toughness of Austenitic and Duplex Stainless Steel Weldments

3-Determination of Stress Distribution in Crane Hook by Caustic

4-On The Microstructural and Mechanical Characteristics of Friction Stir Spot Welded AA 1050-O Aluminum Alloys

5-Microstructure and Static Immersion Corrosion Behavior of AA7020-O Al Plates Joined by Friction Stir Welding

6-Microstructure Examination and Microhardness of Friction Stir Welded Joint Of (AA7020-O) After PWHT

7-Dynamic Optimization of Thin-walled Composite Blades of Wind Turbines

8-Electrochemical and Stress Corrosion Cracking Behaviour of Alpha-Al Bronze in Sulphide-Polluted Salt Water: Effect of Envronmentally-Friendly Additives

9-Microstructural, Mechanical and Wear Behavior of A390/Graphite and A390/Al2O3 Surface Composites Fabricated Using FSP

10-Prediction of The Wear Behaviour of UHMWPE Using Artificial Neural Networks

11-Microstructural Evaluation of Stainless- Cladded Carbon Steel by Welding and the Effect of Thermal Aging

12-Tribological Characteristics of Epoxy Based Nano-Composites under Dry Sliding and Water Lubricating Conditions

13-Corrosion Behaviour of Dissimilar A319 and A356 Cast Aluminum Alloys Joined by Friction Stir Welding ( FSW )

14-Friction Stir Welding of Dissimilar A319 and A356 aluminium Cast Alloys

15-Impact Behavior of Different Stainless Steel Weldments at Low Temperatures

16-Mechanical and Tribological Characteristics of Epoxy-Based PMCs Reinforced With Different Ceramic Particulates

17-Elevated Temperature Mechanical Properties of Al Alloy AA6063/SiCp MMCs

18-Effect of Tool Rotational and Welding Speeds on The Microstructural and Mechanical Characteristics of Friction Stir Welded A319 Cast Al Alloy

19-Effect of Squeezing on Porosity and Wear Behaviour of Partially Remelted A319/20 Vol.-%SiC MMCs

20-Mechanical Properties and Deformation Behaviour of Aluminum Metal Matrix Composites

21-Effect of Low Temperature Aging on The Impact Properties of 316L Stainless Steel Weld Deposit

22-Assessment of Dissimilar Weld Joint of Boiler Ferritic Steel Using Austenitic Stainless Steel Electrodes

23-Mechanical properties of A356/Particle Metal Matrix Composites "

24-" Fracture Toughness and Fatigue Properties of Welded Joints in Ductile Cast Iron"

25-Fracture Toughness and Impact Properties of A 356/Particle Metal Matrix Composites "

26-Aging and Wear Behaviour of A356/Particle Metal Matrix Composites "

27-Effect of Inclusions on the Fatigue Limit of a Heat- Treated carbon steel "

28-Fatigue Crack Initiation Associated with Inclusions in a low Carbon Steel"

29-Effect of a Thin Copper Plus Nickel Coating on the Development of Fatigue Cracks in a Carbon Steel"

30-Evaluation of Grain Size and Hardness using Ultrasonic Attenuation Measurements in a Carbon steel"

31-An Assessment of Non- Metallic Inclusions in a low Carbon Steel and a Carbon Rail Steel"

32-The Effect of Surface Roughness on the Pitting Corrosion of 316 Stainless Steel in 3% Na CI Aqueous Solutions"

33-A Study of factors Governing the Mechanical properties of low carbon steel "

34-Effect of ferrite Grain size on the Fatigue behaviour of welded Joints in Steel"

35-Scale Formation and its Effect on the Performance of Once through MSF plant "

36-The Effect of Aging on the Corrosion Fatigue of 316 Stainless Steel"

37-The Fatigue Behaviour of Medium Carbon Steel After Different Heat treatment "

38-"Effect of Ferrite Grain Size and Hot Working Condition on Fatigue Crack Propagation in Steel "

39-The Effect of Introducing a Back – Side Groove on the Fatigue Behaviour of Butt Welds in Steel "

40-A Field Study of Material Performance at the Desalination Plant in Matrouh"

41-Effect of Incomplete Penetration on the Fatigue Life of Welded Joints in Mild Steel

42-Fatigue Behaviour of Locally produced coarse Grained low carbon Steel"

43-Effect of High Temperature Exposure on the fatigue limit of 316 Stainless Steel"

44-The Effect of Controlled Rolling on the Fatigue Limit of Steel"

45-Effect of Controlled Rolling on Ferrite Grain Size and Mechanical Properties of low carbon and Niobium Bearing Steels "

46-The effect of liquid of Sodium Environment Contaminated with carbon on 316 Stainless Steel"

47-Effect of Microstructure on Fatigue Crack Growth in Controlled Rolled Steels "

48-Effect of Liquid Sodium on Fatigue Crack Growth in CFR Materials"

49-Effect of Welding Techniques on Corrosion Characteristics of Welded Joints of Types 304L, 316L and Duplex Stainless Steels

50-On The Effect of FSP on The Microstructural and Mechanical Characteristics of A390 Hypereutectic Al-Si Alloy

Prof. Tarek Ahmed Fouad Khalifa :: Publications: