Publication From Year: Publication TO Year:

Faculty of Engineering, Benha: Department of Mechanical Engineering

Total number of Publications in the Department of Mechanical Engineering - Faculty of Engineering, Benha is 995

Wisam Mohamed Faruk Elsaied Kandil
Local Publication (3)
International Publication (5)
Total (8)
# Publication Authors Year Localization
1 Effect of dispersion of alumina nanoparticles and graphene nanoplatelets on microstructural and mechanical characteristics of hybrid carbon/glass fibers reinforced polymer composite Mohamed Abu-Okail , Naser A. Alsaleh , W.M. Farouk, Ammar Elsheikh, Ahmed Abu-Oqail, Yasmin A. Abdelraouf, M. Abdel Ghafaar 2021 International
2 Effect of Friction Stir Processing Parameters on the Mechanical and Dynamic Responses of AA 5052-H32 Mohammed Gamila,W.M. Farouk and Mamdouh I. Elamy 2022 Local
3 Effect of lattice structure evolution on the thermal and mechanical properties of Cu–Al2O3/GNPs nanocomposites Abdulrahman Khamaj, W.M. Farouk, W.M. Shewakh a, A.M.I. Abu-Oqail, A. Wagih, Mohamed Abu-Okail 2021 International
4 Electrospun precursor carbon nanofibers optimization by using response surface methodology Ashraf A. Ali a, M.M. Eltabey, W.M. Farouk, Said H. Zoalfakar 2014 International
5 Improving the performance of trays solar still using wick corrugated absorber, nano-enhanced phase change material and photovoltaics-powered heaters A.S. Abdullah, Z.M. Omara, F.A. Essa, M.M. Younes,. Shanmugan, Mohamed Abdelgaied, M.I. Amro d, A.E. Kabeel, W.M. Farouk 2021 International
6 Modeling and Optimization of CO2 Laser Turning Process for Armored Steel Assisted by Oxygen Wisam.M.Farouk, Ahmed.M.Rezk, Wagih.W.Marzouk, Fayz.E.Abo Ghriba, El-Awady.A.Attia 2022 Local
7 Modeling and optimization of working conditions of pyramid solar still with different nanoparticles using response surface methodology W.M. Farouk, A.S. Abdullah, Suha A. Mohammed, Wissam H. Alawee, Z.M. Omara, F.A. Essa 2022 International
8 Multi-response optimization and modeling of CO2 Laser turning process with (X10CrNiTi18-9) St.St assisted by O2 gas Wisam.M. Farouk, Ahmed.M.Rezk, Wagih.W.Marzouk, Faiz.E.Abo Ghriba, El-Awady.A Attia 2022 Local
ABDELMOTY MOHAMED ELANWAR ELHAKEEM
Local Publication (29)
International Publication (0)
Total (29)
# Publication Authors Year Localization
1 An Investigation ito the Static Characteristics of Hydraulic Control Elements. Proceeding of the 3rd International Conference on Production Engineering, Design and Control, Alexandria University, Dec. 12-14 1986 Local
2 Effect of Mg-Treatment on the machinability of Spheroidal Graphite Cast Iron. Current Advances in Mechanical Design and Production, Proceedings of the 1st International Conference on Mechanical Design and Production, Cairo University, Dec. 27-29 1979 Local
3 Effect of Porosity on the Machinability of Aluminum Pressure Die Castings. Second Symposium on Foundry Technology CMRDI, 1977 Local
4 Evaluation of Nodularity in Ductile Cast Iron. Proceeding of the 1st International Conference on Production Engineering, Design and Control, Alexandria University, Dec. 27-29 1980 Local
5 Factors Affecting Nodularity and Properties of Spheroidal Graphite Cast Iron. Alsebaka Journal, Nr. 20, 1982 Local
6 Factors Affecting the Cutting Resistance of Steel. 2nd Cairo University Conference on Mechanical Design and Production, Dec. 27-29 1982 Local
7 Improving Cutting Performance by Thread Tapping. 2nd International Ain-Shams University Conference on Production Engineering, Design for Development. Cairo, Dec.29-31, 1987 Local
8 Influence of Drill Wear on Burr Formation. Proceeding of the 3rd International Conference on Production Engineering, Design and Control, Alexandria University, Dec. 12-14 1986 Local
9 Influence of Fluctuating Depth of Cut on Life of Turning Tools. Bulletin of the Faculty of Engineering, Elminia University, vol 5, Part 1 1986 Local
10 Influence of Skin Layer Characteristics on the Wear Behavior of Cutting Tools. 4th Cairo University Conference on Mechanical Design and Production, Dec. 27-29 1988 Local
11 Machinability of Aluminum Pressure Die Castings By Core Drilling. M.Sc. Thesis, Cairo University 1975 Local
12 Machining Characteristics of Copper Cast Alloys. Proceeding of the 3rd International Conference on Production Engineering, Design and Control, Alexandria University, Dec. 12-14 1986 Local
13 Machining Characteristics of Die Casting Aluminum Alloy GD-AlSi17Cu4FeMg. 2nd International Ain-Shams University Conference on Production Engineering, Design for Development. Cairo, Dec.29-31 1987 Local
14 Machining Characteristics of Spheroidal Graphite Cast Iron. Dissertation, Cairo University 1979 Local
15 Mechanism of Formation of Flank adhesion during the Machining of Spheroidal Graphite Iron. 2nd Joint International Zagazig University and Leisister Polytechnic Conference on Production Engineering, April 13-15, 1983 Local
16 Modifying a new Method for the evaluation of Nodularity in Ductile Cast Iron. 31st Foundry Conference and Exhibition, Brno, Czech Republic, Sept.27,28 1994 Local
17 Nodularity as an Indexof Tensile Properties of Ferritic Ductile Cast Iron. Scientific Report, TM.94.18, Laboratory of Thermal Processing of Materials, Institute of Manufacturing Engineering, Technical University of Denmark, Lyngby, Denmark, 1994 Local
18 Nodularity of Graphite in Ductile Cast Iron. Scientific Report, TM.94.18, Laboratory of Thermal Processing of Materials, Institute of Manufacturing Engineering, Technical University of Denmark, Lyngby, Denmark, 1994 Local
19 On the Evaluation of Nodularization in Ductile Cast Iron. 3rd Conference on Metal Casting, Cairo, March 31-April 2 1987 Local
20 Optimum Conditions for the Machining of Nodular Iron. Proceeding of the 2nd International Conference on Production Engineering, Design and Control, Alexandria University, Dec. 27-29, 1983 Local
21 Parametric Studies and Optimization of Wire Electrochemical Turning Process. M.Sc. Thesis, Benha University 2009 Local
22 Roughness Characteristics of Machined Surfaces. IASTED – International Symposium Reliability and Quality Control, Paris, France June 24-26, 1987 Local
23 Selection of Substitutional Machining Methods. 11th (1st International) Annual Operation Research Conference of Zagazig University, Cairo Nov. 28-30 1988 Local
24 Study of Strip Rolling Process of A Nonferrous Metal. M.Sc. Thesis, BHIT 1999 Local
25 The Application of Self-acting Gas-lubricated three lobe journal Bearings to High Precision Machine Tools. IASTED – International Symposium Reliability and Quality Control, Paris, France June 22,23 1988 Local
26 The Deformation of a Thin Ring under Equal and Equally Spaced Radial Forces and its Utilization in the Production of Three Lobe Bearings. Proceeding of the 2nd International Conference on Production Engineering, Design and Control, Alexandria University, Dec. 27-29 1983 Local
27 The Role of Ductility in Metal Cutting. 3rd Cairo University Conference on Mechanical Design and Production, Dec. 28-30 1985 Local
28 The Use of Agricultural Wastes in Solar Heaters. 5th International Conference on Renewable Energy, Miami, California, USA, Dec.13-15 1982 Local
29 Tool Wear – the main Measure of Machinability. Bulletin of the Faculty of Engineering, Elminia University, vol 5, Part 1 1986 Local
Ahmed abdelfatah mohamed hassanin elbetar
Local Publication (0)
International Publication (0)
Total (0)
Ahmed Mohamed El-Assal
Local Publication (18)
International Publication (24)
Total (42)
# Publication Authors Year Localization
1 A Comparative Study of Existing Rolling Models Applied to Aluminum El-Hakeem, A., Elassal, A., Kasem, A., and AbuSina, A. 2000 Local
2 A lean manufacturing road map using Fuzzy-DEMATEL with case based analysis Sameh N. Seleem, El-Awady Attaia, and Ahmed M. El-Assal 2020 International
3 A lean manufacturing road map using fuzzy-DEMATEL with case-based analysis Sameh N Seleem, El-Awady Attia, Ahmed Karam, Ahmed El-Assal 2020 International
4 A non-incremental finite element formulation of large deformation piezoceramic-laminatedplates Nada, A., El-Assal, A.M 2010 International
5 A Parametric study of the Chaboche Viscoplastic Constitutive Theory, Presented in the MEET'N'93 El-Assal A.M. 1993 International
6 A Study of Room Temperature Stress Relaxation and Creep of Type-316 Stainless Steel El-Assal A.M. 1994 Local
7 Absolute nodal coordinate formulation of large-deformation piezoelectric laminated plates Ayman A. Nada and Ahmed M. El-Assal 2011 International
8 An Evaluation of the Chaboche and Bodner-Partom Viscoplastic Constitutive Theories for Strain Rate Sensitive Materials El-Assal A.M. 1988 International
9 An Experimental and Analytical Study of the Strain-Rate Sensitivity of Type 316 Stainless Steel Jones and A. M. El-Assal 1989 International
10 An integrated model for achieving business strategic objectives with a case study Mohamed H Essawy, El-Awady Attia, Ahmed M El-Assal 2019 International
11 Combined Torsional and Bending Fatigue of Unidirectional GFRP Composites El-Assal A.M.,and Khashaba, Usama. 1999 Local
12 Computational Design Scheme for Wind Turbine Drive-Train Based on Lagrange Multipliers Mohamed Sh. Saleh, Ayman A. Nada, Ahmed El-Betar, Ahmed El-Betar, Ahmed El-Assal 2017 International
13 Corrosion of reinforced steel El-Assal A.M. 2006 International
14 Creep Behavior of Acrylic RAsin Dental Material Shehata, M. and El-Assal, A. 1999 Local
15 Development of a New 5 DoF Robotic Assistant System for Neurosurgery Amr Marzuq, Mahmoud Magdy, Ahmed El-Assal, Baher M Eltoukhy 2019 International
16 Effect of Strain Rate on the Mechanical Response of Nylon 6/6 Rods, Current Advances in Mechanical Design & Production L. Jones, A. M. El-Assal, and T. W. Snouffer 1991 Local
17 Effect of the Al2O3 powder addition on the metal removal rate and the surface roughness of the electrochemical grinding machining Hossam M Yehia, Mohamed Hakim, Ahmed El-Assal 2020 International
18 Evaluating the Performance of Neural Network and Kalman Filter Based Linear Model on Classification of Hand EMG Signals Abdullah Ahmed, Mahmoud Magdy, Ahmed El-Assal, Ahmed El-Betar, Hussein FM Ali 2019 International
19 Evaluation of the Bodner-Partom Viscoplastic Constitutive Theory for Strain Rate Sensitive Materials, Proceedings of PEDAC El-Assal A.M., and D. L. Jones 1989 Local
20 Evaluation of the Chaboche Viscoplastic Constitutive Theory for Strain Rate Sensitive Materials from A Series of Monotonic Tensile Tests El-Assal A.M. and D. L. Jones 1989 International
21 Experimental Study of Strain Rate Sensitivity of Two Engineering Materials ‚Proceedings of PEDAC Jones and A. M. El-Assal 1989 Local
22 Experimental Study of Strip Rolling Process of Commercial Aluminum El-Assal A.M., El-Hakeem, A., Kasem, A., and AbuSina, A. 2000 Local
23 Fatigue analysis of unidirectional GFRP composites under combined bending and torsional loads El-Assal A.M., and U.A. Khashaba 2007 International
24 Fault diagnosis of a hydraulic power system using an artificial neural network Betar, A., Abdelhameed, M, El-Assal, A., and, Abelsatar, R. 2006 International
25 Fracture behavior of the polymethyl methacrylate With two different curing processes El-Assal A.M., Al-Dosary S., Shehata M.M., and Basalah A.A 2008 Local
26 IDENTIFICATION OF CRITICAL SUCCESS FACTORS FOR LEAN MANUFACTURING USING FUZZY DEMATEL METHOD El-Awady Attia, Sameh N. Seleem, Ahmed El-Assal 2018 International
27 IDENTIFICATION OF CRITICAL SUCCESS FACTORS FOR TOTAL PRODUCTIVE MAINTENANCE Sameh N. Seleem, El-Awady Attia, Ahmed El-Assal 2018 International
28 Laminate Ploymer Composite: A comparative Laboratory Study Shehata, Mohamad, El-Gendy, Atia M., and El-Assal, Ahmed M. 1998 Local
29 Mechanical Properties of Polymethyle Methacrylate-Ketoprofen Mixture in Stent and Splint Preparaation El-Assal A.M. 2004 International
30 Minimizing the Cost of An Arc Welding Joint M. Rashed, M. A. Shahin and A. M. El-Assal 1989 Local
31 Prediction and Verification of the Material Behavior Using the Chaboche Viscoplastic constitutive Theories L. Jones and A. M. El-Assal 1991 International
32 Prioritization of failure modes of fire and rescue vessels with application case study 2017 International
33 Review Of Modeling And Simulation Technologies Application To Wind Turbines Drive Train Ahmed El-assal, Mohmed Shehata, and Ahmed ElBetar 2021 International
34 Shear Bond Strength of Direct Restorative Gallium Alloys Compared with Selected Dental Amalgam Alloys Shehata, M. and El-Assal, A. 1999 Local
35 Spare Parts Classification in Marine Rescue and Fire Services' Stores with Case Study Zainalabdeen Sughayer, El-Awady Attia, Ahmed El-Assal 2017 International
36 Strain and Strain-Rate History Effect on the Dual Rate Tensile Response of Two Engineering Materials El-Assal A.M., and D. L. Jones 1990 Local
37 Stress Around 2 Bio-Ceramic Implants used as Abutments for Partial Denture El-Assal A.M. and Al-Wakad, T 2001 Local
38 Structural and Environmental Effect on Compressive Strength of Notched GFRP Composites Khashaba, Usama. and El-Assal, Ahmed M. 1998 Local
39 Temperature Effect on Impact Properties of Denture Base Acrylic Material Shehata, M., El-Assal, A., and Elshorbagy, Z. 1999 Local
40 The Effect Of Temperature On Some Mechanical Properties Of Zirconia As An Implant Material Amin, H. M., El-Segai, A. A., Tawfik, A., El-Assal, A. M. and El-Okel, A. B. 2006 Local
41 Two Organometallic Compounds for Improving the Properties of Acrylic Resin El-Segaii, Azza A., El-hiti, Gamal A., El-Assal, Ahmed M., and Sayyah, S. M. 1997 Local
42 Using Computer Simulation in Lean Manufacturing Implementation S.N. Seleem, M. Helal and A. M. El-Assal 2014 International
Ahmed Soliman Huzayyin
Local Publication (20)
International Publication (2)
Total (22)
# Publication Authors Year Localization
1 A Simple Model for Rewetting of Hot Tubes Limited by Flooding, المؤتمر الدولي الخامس لطرق المحاكاه فى الهندسة النووية –بكندا Prof. Ahmed Huzayyin, Prof. Abdel-Wahed -Dib Dr. Sameh Nada, Dr. Mamdoh Sokry, Eng. Emad 1997 Local
2 Air-Side Performance of a Wavy-Finned-Tube Direct Expansion Cooling and Dehumidifying Air Coil, تحت الطبع مجلة REFRIGRATION Prof. Ahmed Huzayyin, Prof. Samah Nada, Eng. Hassan Fawzy. 1950 Local
3 Cooling An Array of Multiple Heat Sources by a Row of Slot Air Jets, المجلة الدولية لانتقال الحرارة والكتلة مجلد 49 ص 2597-2609 Prof. Ahmed Huzayyin, Prof. Samah Nada, Prof. Mohamed Anwar, Eng. Amir Faris, 2006 Local
4 Experimental Evaluation of Diesel Engine Performance and Emission using Blends of Jojoba Oil and Diesel Fuel, مجلة تحويل وادارة الطاقة - مجلد 45 رقم 14-15 الناشر السيفر Prof. Ahmed Huzayyin, Prof. Amed Hassan, Prof. Mohamed Anwar, Eng. Alaa EL-Den. 2004 Local
5 Heat and mass transfer in a composite bed of silica gel and macroencapsulated pcm for dehumidification, eurotherm, المؤتمر الأوروبى الخامس للحراريات ايندوفن – هولندا Prof. Ahmed Huzayyin, M.A. Rady, E. Arquis, P. Monneyron, C. Lebot. 2008 Local
6 Laminar Burning Velocity and Explosion Index for LPG-air and Propane-Air Mixtures, مؤتمر جامعة عين شمس الثانى فى هندسة البيئة - القاهرة – مصر Prof. Ahmed Huzayyin, Prof. Hany Moneb, Ass. Prof. Mohamed Saied, Eng. Ali Attiya 2007 Local
7 Laminar Burning Velocity and Explosion Index for LPG-air and Propane-Air Mixtures, مجلة Fuel - العدد 87 الأصدار الأول صفحة 39-57 Prof. Ahmed Huzayyin, Prof. Hany Moneb, Ass. Prof. Mohamed Saied, Eng. Ali Attiya. 2008 Local
8 Performance and Emission characteristics of Diesel engine using Blends of Jojoba Oil and Jojoba methyl ester with gas oil., مجلة العلوم الهندسية- عين شمس مجلد 39 رقم 2 ص 473-495 Prof. Ahmed Huzayyin, Prof. Amed Hassan, Prof. Mohamed Anwar, Eng. Alaa EL-Den 2004 Local
9 Performance Enhancing of Counter-flow Vortex Tubes, مجلة العلوم الهندسية جامعة أسيوط مجلد 30 عدد 4 Prof. Ahmed Huzayyin, Assis. Prof. Mohamed Saied, Dr. Ahmed Zaky, Eng. Hassan Ahmed 2002 Local
10 Study of heat and mass transfer in a dehumidifying desiccant bed with macro-encapsulated phase change materials, Renewable Energy مجلة - تحت الطباعة - متاحة على الانترنت Prof. Ahmed Huzayyin, M.A. Rady, E. Arquis, P. Monneyron, C. Lebot, E. Palomo. 2008 Local
11 Unconventional Size Reducer Parameters for Brittle Agricultural Wastes - Part. I Design, المؤتمر الدولي العاشر لهندسة القوي الميكانيكية كلية الهندسة -جامعة اسيوط Prof. Ahmed Huzayyin, Dr. Ibrahim Mohamed, Dr. Ali Sabry, Dr. Yahya Abdel-Hamed 1997 Local
12 Unconventional Size Reducer Parameters for Brittle Agricultural Wastes - Part. II Optimization, المؤتمر الدولي العاشر لهندسة القوي الميكانيكية كلية الهندسة جامعة اسيوط Prof. Ahmed Huzayyin, Dr. Ibrahim Mohamed, Dr. Ali Sabry, Dr. Yahya Abdel-Hamed 1997 Local
13 A Novel Design of a Short Soil Bin for Evaluating Ploughing Time Performance, المؤتمر الدولي العاشر لهندسة القوي الميكانيكية كلية الهندسة -جامعة اسيوط Prof. Ahmed Huzayyin, Dr. Ibrahim Mohamed, Dr. Yousef Mohamed, Dr. Bahaa Yousef 1997 Local
14 An Investigation of the Group Scheduling Heuristics in a Flow-Line Cell, مجلد المؤتمر الدولى السابع للتصميم الميكانيكى والانتاج - جامعة القاهرة - فبراير Prof. Ahmed Huzayyin, Dr. Merfet Bader, Eng. Magdy Helal 2000 Local
15 Cooling An Array of Multiple Heat Sources by a Row of Slot Air Jets, مجلة العلوم الهندسية جامعة أسيوط مجلد 32 عدد 2 Prof. Ahmed Huzayyin, Prof. Samah Nada, Prof. Mohamed Anwar, Eng. Amir Faris 2004 Local
16 Dynamic Simulation Modeling for Heat and Water Transfer in Fluid-roof Greenhouse, المؤتمر الدولي الثانى عشر لهندسة القوي الميكانيكية -كلية الهندسة جامعة المنصورة Prof. Ahmed Huzayyin, Prof. Ahmed Mahmoud, Dr. Nabil Yassen, Dr. Ibrahim Mohamed, Dr.Toyoki Kozai 2001 Local
17 Effect of Heating Surface Shape on Enhancement of Heat Transfer During Pool Boiling, المؤتمر الدولى الثالث للطاقة الحرارية وتطوير البيئة مراكش Prof. Ahmed Huzayyin, Prof. Ahmed Zaky, Dr. Mahmoud Awad. 1997 Local
18 Effect of Wind Tunnel Blockage on the Performance of a Horizontal Axis Wind Turbine with Different Blade Number A Eltayesh; M B Hanna; F Castellani; A S Huzayyin; H M El-Batsh; M Burlando; M Becchetti 2019 International
19 Experimental and Numerical Investigation into Effect of Blade Number on Aerodynamic Performance of a Small-Scale Horizontal Axis Wind Turbine A Eltayesh; F Castellani; M Burlando; M B Hanna; A S Huzayyin; H M El-Batsh; M Becchetti 2021 International
20 Solar Radiation Transmission through Hollow-Channeled Fluid-Roof Greenhouse Cover .Part I, المجلة العلمية لكلية الهندسة جامعة اسيوط -المجلد 27 رقم 1 Prof. Ahmed Huzayyin, Prof. Ahmed Mahmoud, Dr. Nabil Yassen, Dr. Ibrahim Mohamed 1999 Local
21 Solar Radiation Transmission through Hollow-Channeled Fluid-Roof Greenhouse Cover .Part I, المجلة العلمية لكلية الهندسة جامعة اسيوط -المجلد 27 رقم 1 Prof. Ahmed Huzayyin, Prof. Ahmed Mahmoud, Dr. Nabil Yassen, Dr. Ibrahim Mohamed 1999 Local
22 Solar Radiation Transmission through Hollow-Channeled Fluid-Roof Greenhouse Cover .Part II, المجلة العلمية لكلية الهندسة جامعة اسيوط -المجلد 28 رقم 2 Prof. Ahmed Huzayyin, Prof. Ahmed Mahmoud, Dr. Nabil Yassen, Dr. Ibrahim Mohamed 2000 Local
Aref mohamed ahmed soliman
Local Publication (3)
International Publication (67)
Total (70)
# Publication Authors Year Localization
1 A comparison of control strategies for the switchable damper suspension system Aref M. A. Soliman, D. A. Crolla and F. M. El-Sayed 1993 International
2 A Comparison of The Performance and Power Requirements for Switchable Damper and Active Suspension Systems", Benha Journal of Engineering Science and Tech., BJEST, 2020. Aref M .A. Soliman, Galal, M., and Mansour, N., 2021 Local
3 A comparison of the performance and power requirements for various active suspensions with gain scheduling strategies Aref M. A. Soliman 2015 International
4 A comparison of the performance and power requirements of three semi-active suspension control laws Aref M. A.Soliman 2004 International
5 A hydro-pneumatic limited bandwidth active suspension system for road vehicles Aref M. A. Soliman 1994 International
6 A Self-tuning controller for a switchable damper suspension Aref M. A. Soliman and D. A. Crolla 2001 International
7 A study of the behaviour of passive and active suspension systems for passenger cars Aref A. El-Betar and Ahmed M. A. Soliman 1995 International
8 A study of the passive suspension system F. M. El-Sayed, D. A. Crolla and Aref. M. A. Soliman 1991 International
9 A Theoretical comparison between passive, switchable damper and slow active suspension systems F. M. El-Sayed, D. A. Crolla and Aref. M. A. Soliman 1991 International
10 A Vehicle seat suspension with hybrid control system Aref M. A. soliman 2001 International
11 Active Suspension and Anti-lock Braking Systems for Passenger Cars Aref M. A. Soliman, M. M Saber, K. R. M. Mahmoud 2009 International
12 Adaptive control strategies for a switchable damper suspension system Aref M. A. Soliman, A. M. Abd El-Tawwab and D. A. Crolla 1996 International
13 Adaptive LQR Control Strategy for Active Suspension System Aref M. A, Soliman 2011 International
14 An experimental and analytical study of the tractor ride comfort . Aref M. A. Soliman, S. M. Moustafa, F. M. El-Sayed and K.A. Abd El-Gawwad 1995 International
15 An investigation for passive suspension system and ride comfort in vehicles Aref M. A. Soliman 2001 International
16 An Investigation of Anti-lock Braking System for Automobiles Aref M. A. Soliman and Mina M. S. Kaldas 2012 International
17 An Investigation of Combined Twin Accumulator Suspension and Anti-Lock Braking System for Passenger Cars Aref M. A. Soliman, M. M Saber, K. R. M. Mahmoud 2008 International
18 An investigation of passive, twin accumulator and active suspension systems for passenger cars Aref M. A. Soliman 2006 International
19 Control strategies of the LimitedBandwidth Hydro-pneumatic Active Suspension for Road Vehicle Aref M. A. Soliman, Ahmed A. El-Betar, Mina M.S. Kaldas, Shereif M. Abd El-Salam 2020 Local
20 Dry Friction Occurring in the Suspensions for Passive and Switchable Damper Systems and its Effect on Ride Comfort 66. Aref M. A. Soliman, Mahmoud A. Hassan 2018 International
21 Effect of drawbar pull on the tractor ride comfort Aref M. A. Soliman, S. M. Moustafa, F. M. El-Sayed and K. A. Abd El-Gawwad 1993 International
22 Effect of Road Disturbance on the Ride Performance of Twin Accumulator and Semi-Active Suspension Systems Aref M. A. Soliman 2017 International
23 Effect of Road Disturbance on the Ride Performance of Twin Accumulator and Semi-Active Suspension Systems . M. A. Soliman 2017 International
24 Effect of Road Roughness on the Vehicle Ride Comfort and Rolling Resistance Aref M. A. Soliman 2006 International
25 Effect of Road Roughness on the Vehicle Ride Comfort using Semi-Active Suspension System Aref M. A. Soliman 2010 International
26 Effect of suspension spring stiffness on the vehicle dynamics Aref M. A. Soliman, S. A. Abd Allah, A. A. El-Betar and M. S. Hamed 2001 International
27 Engine mount for improving vehicle ride performance Ali M. Abd El-Tawwab and Aref M. A. Soliman 1997 International
28 Engine Performance and Exhaust Emissions of an SI Engine Using Acetic Acid, Ethanol, and Gasoline Blended Fuel M. Attalla, Aref M .A. Soliman and Mahmoud A. Torky 2013 International
29 Evaluation of active suspension systems performance and power requirements Aref M. A. Soliman 2004 International
30 Evaluation of Ride Performance through a Comparative Study of Switchable Damper and Active Suspension by Using Fuzzy and Linear Quadratic Regulator Controller’s Strategies Aref M .A. Soliman, Galal, M., and Mansour, N 2021 International
31 Experimental results from a hydro-pneumatic slow active suspension system Aref M. A. Soliman 1995 International
32 Experimental results from a slow active suspension D. A. Crolla , Aref M. A. Soliman, F. M. El-Sayed and M. M. Alaily 1993 International
33 Experimental results from a three setting switchable damper Aref M. A. Soliman, D. A. Crolla, F. M. El-Sayed and M. M. El-Alialy 1994 International
34 Experimental study of the tractor ride comfort Aref M. A. Soliman 1993 International
35 Fuzzy-Skyhook Control for Active Suspension Systems Applied to a Full Vehicle Model Aref M.A. Soliman, Mina M.S. Kaldas, David C. Barton and Peter C. Brooks 2012 International
36 Improvement of Bus Ride Comfort via Active Suspension and Connected Dampers M.S. Kaldas,; Aref M.A. Soliman 2013 International
37 Improvement of full vehicle ride performance by an appropriate engine mount systems Aref M. A. Soliman 2001 International
38 Improvement of the Truck Ride Comfort Via Cab Suspension Aref M. A. Soliman 2008 International
39 Improvement of Truck Semi-Trailer Ride Comfort using Different Control Strategies Mina M. S. Kaldas and Aref M. A. Soliman 2011 International
40 Improvement of vehicle ride comfort using control strategies for the switchable damper suspension system A. M. A. Soliman 2016 International
41 Improvement of Vehicle Ride Performance Using a Hydro-pneumatic Active Suspension System Aref M. A. Soliman, S. A. Abd Alla Y. A. El Mashed, M. S. A. Hamid 2006 International
42 Improvement of Vehicle Ride Performance Using a Switchable Damper Suspension System Aref M. A. Soliman 2007 International
43 Improvement of vehicle ride performance using a switchable damper suspension system Aref M. A. Soliman 2007 International
44 Influence of Active Suspension Preview Control on Vehicle Ride and Braking Performance Mina M. S. Kaldas and Aref M. A. Soliman 2014 International
45 Influence of Road Roughness on the Ride and Rolling Resistance for Passenger Car Aref M. A. Soliman, M. M Saber and S. A. Abdalla 2013 International
46 Influence of work piece support on the generated surface in turning Abdelkader A. Ibrahim, Aref M. A. Soliman, H. A. Housin 2000 International
47 Limited bandwidth active suspension employing wheelbase preview Aref M. A. Soliman, D. A. Crolla 2001 International
48 Model Reference Control for Active Suspension System Kaldas, M., Soliman, A., Abdallah, S., and Amien, F 2019 International
49 Off-road tyre modelling I: the multi-spoke tyre model modified to include the effect of straight lugs K. A. El-Gawwad, D. A. Crolla, Aref M. A. Soliman and F. M. El-Sayed 1999 International
50 Off-road tyre modelling II: effect of camber on tyre performance 27 K. A. El-Gawwad, D. A. Crolla, Aref M. A. Soliman and F. M. El-Sayed 1999 International
51 Off-road tyre modelling III: effect of angled lugs on tyre performance K. A. El-Gawwad, D. A. Crolla, Aref M. A. Soliman and F. M. El-Sayed 1999 International
52 Off-road tyre modelling IV: extended treatment of tyre-terrain interaction for the multi-spoke model K. A. El-Gawwad, D. A. Crolla, Aref M. A. Soliman and F. M. El-Sayed 1999 International
53 On the ride comfort available from road and wheelbase preview with semi active car suspensions Aref M. A. Soliman 1997 International
54 On the ride comfort available from road and wheelbase preview with semi active car suspensions Aref M. A. Soliman 1998 International
55 Parameters Affecting Ride Comfort in Road Vehicles - A Review Aref M. A. Soliman 2002 International
56 Parameters Affecting Truck Ride Comfort Aref M. A. Soliman, N. M Ghazaly and F. S. Kadry 2014 International
57 Parameters Affecting Vehicle Ride Comfort Using Half Vehicle Model Aref M. A. Soliman, S. M. Moustafa, A. O. M. Shogae 2008 International
58 Prediction of the performance of off road tyres K. A. El-Gawwad, D. A. Crolla, Aref M. A. Soliman and F. M. El-Sayed 1998 International
59 Preview control for a semi active suspension system Aref M, A. Soliman and D. A. Crolla 1996 International
60 Ride Comfort Performance Investigation for Compressed Natural Gas Fuelled Car Are fM. A. Soliman and Mina M. S. Kaldas 2015 International
61 Robustness Analysis of the Model Reference Control for Active Suspension System Mina M. Kaldas, Aref M.A. Soliman, Sayed A. Abdallah, Fomel F. Amien 2020 International
62 Semi-active Suspension Systems from Research to Mass-market – a Review Aref M. A. Soliman and Mina M.S. Kaldas 2019 International
63 Study of Anti-Lock Brake System and Anti-Roll Bar for Passenger Cars Mina M.S. Kaldas, Nouby M. Ghazaly, Aref M.A. Soliman and Al-Shimaa H. Kamal El-Deen 2017 International
64 Study to enhance the Performance of air cooling system by mixing direct expansion unit and chilled water system M. Attalla, A. M.A. Soliman, A. Abd El-Naeem 2012 International
65 The area of contact and rolling resistance coefficient of tyres interacting with off-road Aref M. Soliman, D. A. Crolla, F. M. El-Sayed and K. A. Abd El-Gawwad 1995 International
66 The effect of combined lateral, longitudinal slip and yaw for a cambered tyre on off-road vehicle performance K.A. Abd El-Gawwad, D. A. Crolla, Aref M. A. Soliman, F. M. El-Sayed 1999 International
67 The effect of road and wheelbase preview sensors on the performance of the active suspension system using half vehicle model Aref M. A. Soliman 1995 Local
68 The effect of the trailing implement characteristics on the tractor ride comfort Aref M. A. Soliman 1994 International
69 The modified variable damper used in a quarter vehicle model Aref M. A. Soliman 1993 International
70 The role of agriculture machinery in the development of arid zones Fawzy M. El-Sayed and Aref M. A. Soliman 1992 International
Adel Alam Eldeen Omr Ahmed
Local Publication (0)
International Publication (0)
Total (0)
Ali Mahmoud Ali Attia
Local Publication (1)
International Publication (24)
Total (25)
# Publication Authors Year Localization
1 "Laminar Burning Velocity and Explosion Index for LPG-air and Propane-Air Mixtures", Fuel, Volume 87, Issue 1, January 2008, Pages 39-57. Huzayyian, A. S., Moneib, H. A., Shehatta, M. S., and Attia, A. M A. 2008 International
2 "Laminar Burning Velocity and Explosion Index for LPG-air and Propane-Air Mixtures", Second Ain Shams University International Conference on Environmental Engineering ASCEE2, Cairo, Egypt 2007 Huzayyian, A. S., Moneib, H. A., Shehatta, M. S., and Attia, A. M A., 2007 Local
3 Adding n-butanol, n-heptanol, and n-octanol to improve vaporization, combustion, and emission characteristics of diesel/used frying oil biodiesel blends in DICI engine Nour, M., Elseesy, A.I., Attia, A., Li, X., Nada, S. 2020 International
4 Combustion and emission characteristics of Jojoba biodiesel-jet A1 mixtures applying a lean premixed pre-vaporized combustion techniques: An experimental investigation El-Zoheiry, R.M., EL-Seesy, A.I., Attia, A.M.A., He, Z., El-Batsh, H.M. 2020 International
5 Combustion, Performance and Emission Analysis of Diesel Engine Fuelled by Higher Alcohols (Butanol, Octanol and Heptanol)/Diesel Blends Mohamed Nour, Ali M.A. Attia, S. A. Nada 2019 International
6 Corn and soybean biodiesel blends as alternative fuels for diesel engine at different injection pressures MS Shehata, Ali MA Attia, SM Abdel Razek 2015 International
7 Effect of waste cooking oil methyl ester – Jet A-1 fuel blends on emissions and combustion characteristics of a swirl-stabilized lean pre-vaporized premixed flame Attia, A.M.A., Belal, B.Y., El-Batsh, H.M., Moneib, H.A. 2020 International
8 Experimental and Numerical Investigation for the Aerodynamics of a Linear Compressor Cascade, Aviation Engineering Innovation Conference – AEIC, March 21-22, 2015, Luxor, Egypt. Saeed A. El-Shahat, Hesham M. El-Batsh, Ali M.A. Attia 2015 International
9 Experimental parametric study of servers cooling management in data centers buildings S.A. Nada, K. E. Elfeky, Ali M.A. Attia, W.G. Alshaer 2017 International
10 Experimental study of solving thermal heterogeneity problem of data center servers SA Nada, AMA Attia, KE Elfeky 2016 International
11 Improvement of CI engine combustion and performance running on ternary blends of higher alcohol (Pentanol and Octanol)/hydrous ethanol/diesel Mohamed Nour, Ali M.A. Attia, S. A. Nada 2019 International
12 Influence of diesel fuel blended with biodiesel produced from waste cooking oil on diesel engine performance Ali M.A. Attiaa,Ahmad E. Hassaneenb 2015 International
13 Influence of the structure of water-in-fuel emulsion on diesel engine performance, Fuel, Vol. 116, pp. 703–708, 2014 Attia, A.M.A., Kulchitskiy A.R., 2014 International
14 Investigation the effect of adding graphene oxide into diesel/higher alcohols blends on a diesel engine performance El-Seesy, A.I., Nour, M., Attia, A.M.A., He, Z., Hassan, H. 2020 International
15 Passive Flow Separation Control in Linear Compressor Cascade Mohamed EL-Sheikh ; Hesham El-Batsh ; Attia Ali M.A. ; ; El-Sayed Zanoun 2019 International
16 The effect of Aluminum oxide nanoparticles addition with Jojoba methyl ester-diesel fuel blend on a diesel engine performance, combustion and emission characteristics Ahmed I. El-Seesy, Ali M. A. Attia, Hesham M. El-Batsh 2018 International
17 The effect of Aluminum oxide nanoparticles addition with Jojoba methyl ester-diesel fuel blend on a diesel engine performance, combustion and emission characteristics Ahmed I. El-Seesy, Ali M. A. Attia, Hesham M. El-Batsh 2018 International
18 The effect of castor oil methyl ester blending ratio on the environmental and the combustion characteristics of diesel engine under standard testing conditions Attia, A.M.A., Nour, M., El-Seesy, A.I., Nada, S.A 2020 International
19 Thermal Management of Electronic Servers under Different Power Conditions S.A. Nada · K. E. Elfeky · Ali M.A. Attia · W.G. Alshaer 2015 International
20 “Combustion Characteristics of Jojoba Methyl ester as an Alternative Fuel for Gas Turbine”, ASME International Mechanical Engineering Congress & Exposition, November 14-20, 2014, Montreal, Canada (Paper (IMECE2014-39991) Attia, A.M.A., Radwan M. El-Zoheiry, Hesham M. El-Batsh, Mohamed S. Shehata 2014 International
21 “Effects of Alumina Nanoparticles Additives into Jojoba Methyl Ester-Diesel Mixture on Diesel Engine Performance”, ASME International Mechanical Engineering Congress & Exposition, November 14-20, 2014, Montreal, Canada (Paper (IMECE2014-39988) Attia, A.M.A., Ahamd I. El-Seesy, Hesham M. El-Batsh, Mohamed S. Shehata 2014 International
22 “Influence of Water/Fuel Emulsion Structure on Engine Fuel Efficiency and Environmental Performance”, Dvigatelestroyeniye, № 3, Р. 16-20, 2012 (UDC 621.43.057.3) (In Russian) Attia A.M.A., Kulchitsky A.R. 2012 International
23 “Problems of the use of alternative fuels in ICE”, Research papers of Lithuanian University of Agriculture, Vol. 42, No. 2-3, PP. 127-140, 2010. (ISBN 1392-1134) (In Russian). Kulchitsky A.R., Golev B.Y., Attia A.M.A. 2010 International
24 “The effect of composition and structure of emulsified fuel on the composition of particulate matters” Bulletin of Volgograd Technical University series - Process of Energy Conversion and Power Plants, Issue 5, № 12, pp. 10-13, 2013 (In Russian). Attia A.M.A., Kulchitsky A.R., 2013 International
25 “Water Fuel Emulsions for Diesel Engines”, Mir transporta, No. 3, P. 50-55, 2011 (UDC 621.436: 662.758) (In Russian). Kulchitsky A.R., Golev B.Y., Attia A.M.A., 2011 International
Ayman Ali Ahmed Nada
Local Publication (3)
International Publication (24)
Total (27)
# Publication Authors Year Localization
1 Control of Railroads Lining System”, 9th IFAC Symposium, Budapest, Hungerypp 53-60. Ismail, A. A., El-Betar, A.A., Nada,A.A, 2000 International
2 Control of Robot Structure Deflection”, 7th international conference on production engineering design and control, PEDAC, Vol. II pp 947-958 http://alexsite.com/pedac/ Ismail,A.A., El-Betar,A.A., Nada,A.A, 2001 Local
3 Dynamic Modeling of a Flexible Cantilever Beam, An experimental technique, Proceedings of DETC’03 ASME 2003 Design Engineering Technical Conferences. Megahed, S. and Nada, A. 2003 International
4 Inverse Dynamic Modeling of Robots Using Multibody system Approach, Proceedings of MDP’09, Mechanical Design and production Conferences. Megahed, S. and Nada, A. 2008 Local
5 “A Non-Incremental Finite Element Formulation of Large Deformation Piezoceramic-Laminated-Plates”, 1st Joint International Conference on Multibody System Dynamics IMSDLappeenranta, Finland. El-Assal, A.M. and Nada, A. A. 2010 International
6 “Inverse Dynamic Control of Last-Link Flexible Robots Using Multibody System Approach”, 1st Joint International Conference on Multibody System Dynamics IMSD Lappeenranta, Finland. Megahed, S.M. and Nada, A. A. 2010 International
7 “Modeling and Simulation of Railroads Lining System”, 7th international conference on production engineering design and control, PEDAC, Vol. II pp 823-834 http://alexsite.com/pedac/ Ismail, A. A., El-Betar, A.A., Nada, A.A. 2001 Local
8 A. A. Nada and A. H. Bashiri, 2017, “Selective generalized coordinate partitioning method for multibody systems with non-holonomic constraints,” in Proceedings of the The ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, ASME, Cleveland, Ohio, USA, 2017 Ayman A Nada, Abdullateef H Bashiri 2017 International
9 AA Nada, AS Al-Shahrani, 2017, Dynamic modelling and experimental validation of small-size wind turbine using flexible multibody approach, International Journal of Dynamics and Control: 5(3), pp. 721-732. Ayman A. Nada, Ali S. Al-Shahrani 2017 International
10 AH Bayoumy, AA Nada, SM Megahed, 2014, "Methods of modeling slope discontinuities in large size wind turbine blades using absolute nodal coordinate formulation", Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, vol. 228 no. 3 314-329 AH Bayoumy, AA Nada, SM Megahed 2014 International
11 Ahmed H Bayoumy, Ayman A Nada, Said M Megahed, 2013, "Use of Forward Dynamics Model for Designing Large-Size Wind Turbine Blades", ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA, November 15–21, 2013. Proc. ASME. 56253; Volume 4B: Volume 4B: Dynamics, Vibration and Control, IMECE2013-64309 Ahmed H Bayoumy, Ayman A Nada, Said M Megahed 2013 International
12 Ahmed H. Bayoumy, Ayman A. Nada, Said M. Megahed, 2013, "A Continuum Based Three-Dimensional Modeling of Wind Turbine Blades", ASME Journal Computational and Nonlinear Dynamics, July 2013, Volume 8, Issue 3, 031004 (14 pages). Ahmed H. Bayoumy, Ayman A. Nada, Said M. Megahed 2013 International
13 Ayman A Nada, EM Shaban, 2014, "The Development of Proportional-Integral-Plus Control Using Field Programmable Gate Array Technology Applied to Mechatronic System", American Journal of Research Communication, Volume 2, Issue 4, Pages 14-27 Ayman A Nada, EM Shaban 2014 International
14 Ayman A. Nada, 2013, "Use of B-spline surface to model large-deformation continuum plates: procedure and applications", Nonlinear Dynamics, April 2013, Volume 72, Issue 1-2, pp 243-263. Ayman A. Nada, 2013 International
15 Ayman A. Nada, 2014, "Efficient modeling of continuum blades using ANCF curved shell element", 5th European Conference on Computational Mechanics (ECCM V), 20-25 July 2014 - Barcelona, Spain. Pages 3092-3103 Ayman A. Nada 2015 International
16 Ayman Nada, Ali Al-Shahrani, 2019, "Use of mixed coordinates in modeling wind turbines including tubular tower", Mech. Sci., 10, 35–46, 2019. https://doi.org/10.5194/ms-10-35-2019 Nada, AA, & Al-Shahrani, AS. 2019 International
17 Bai Q., Shehata M., Nada A. (2020) Efficient Modeling Procedure of Novel Grating Tiling Device Using Multibody System Approach. In: Pucheta M., Cardona A., Preidikman S., Hecker R. (eds) Multibody Mechatronic Systems. MuSMe 2021. Mechanisms and Machine Science, vol 94. Springer, Cham. https://doi.org/10.1007/978-3-030-60372-4_19 Bai Q., Shehata M., Nada A. 2020 International
18 Bayoumy, A.H., Nada, A.A., Megahed, S.M. , 2012, "Modeling Slope Discontinuity Of Large Size Wind-Turbine Blade Using Absolute Nodal Coordinate Formulation", Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2012), August 12-15, 2012, Chicago, Illinois, USA. Bayoumy, A.H., Nada, A.A., Megahed, S.M. 2012 International
19 EM Shaban, Ayman A Nada, "On linearization of nonlinear dynamic systems described by state-dependent-parameter (SDP) discrete-time model", 5th European Conference on Computational Mechanics (ECCM V), 20-25 July 2014 - Barcelona, Spain. EM Shaban, Ayman A Nada 2014 International
20 EM Shaban, Ayman A Nada, 2013, "Proportional Integral Derivative versus Proportional Integral plus Control Applied to Mobile Robotic System", Journal of American Science, Volume 9, Issue 12, EM Shaban, Ayman A Nada 2013 International
21 Essam M Shaban, Ayman A Nada, C James Taylor, 2014, "Exact linearization by feedback of state dependent parameter models applied to a mechatronics demonstrator", UKACC 10th International Conference on Control (CONTROL 2014), Loughborough, U.K., 9th - 11th July 2014 Essam M Shaban, Ayman A Nada, C James Taylor 2014 International
22 Mohammed Saleh, Ayman Nada, Ahmed El-Betar, Ahmed El-Assal, 2017, "Computational Design Scheme for Wind Turbine Drive-Train Based on Lagrange Multipliers", Journal of Energy, Volume 2017, Article ID 4027834, 16 pages. Mohammed Saleh, Ayman Nada, Ahmed El-Betar, Ahmed El-Assal 2017 International
23 Nada A, Bishiri A. 2019, Floating Frame of Reference formulation for modeling flexible multi-body systems in premise operational conditions. Journal of Vibration and Control. 2019;25(21-22):2706-2720. doi:10.1177/1077546319867787 Nada A, Bishiri A 2019 International
24 Nada, A.A., Hussein, B.A., Megahed, S.M., Shabana, A.A., 2009, “Floating Frame Of Reference And Absolute Nodal Coordinate Formulations In The Large Deformation Analysis Of Robotic Manipulators: A Comparative Experimental And Numerical Study”, Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2009 August 30-September 2 San Diego, USA. Nada, A.A., Hussein, B.A., Megahed, S.M., Shabana, A.A. 2009 International
25 Nada, A.A., Hussein, B.A., Megahed, S.M., Shabana, A.A., 2010, “Use of the floating frame of reference formulation in the large deformation analysis: experimental and numerical validation”, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, Volume 224, Number 1. Nada, A.A., Hussein, B.A., Megahed, S.M., Shabana, A.A. 2010 International
26 Nada, AA, & Al-Shahrani, AS., 2018, "Effectiveness of Using Mixed Coordinates in Modeling Wind Turbines." Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition. Volume 4B: Dynamics, Vibration, and Control. Pittsburgh, Pennsylvania, USA. November 9–15, 2018. V04BT06A037. ASME. https://doi.org/10.1115/IMECE2018-87493 Nada, AA, & Al-Shahrani, AS. 2018 International
27 Nada, Ayman and El-Assal, Ahmed, "Absolute nodal coordinate formulation of large-deformation piezoelectric laminated plates", Nonlinear Dynamics: Volume 67, Issue 4 (2012), Page 2441-2454. Nada, Ayman and El-Assal, Ahmed 2012 International
Dr. Hesham Mohamed El-Batsh
Local Publication (39)
International Publication (15)
Total (54)
# Publication Authors Year Localization
1 An experimental and numerical study of the tip clearance effect on the three-dimensional flow field through a linear turbine cascade, Eighth International Congress of Fluid Dynamics & Propulsion, Sharm El-Shiekh, Egypt, December 14-17 . El-Batsh, H, Bassily Hanna, M.; Sherif, M.F. 2006 Local
2 CFD investigation of airflow pattern, temperature distribution and thermal comfort of UFAD system for theater buildings applications, Journal of building engineering, 2016, page 274-300 Nada, S., El-Batsh, H., EElattar, H., Ali, N., 2016 International
3 Effect of turbulence modelling on particle dispersion and deposition on compressor and turbine blade surfaces. ASME Paper 2000-GT-519, ASME TURBO EXPO 2000, Munich, Germany. El-Batsh H., Haselbacher H. 2000 Local
4 Heat transfer and fluid flow around semi-circular tube in cross flow at different orientations, Heat and Mass Transfer, vol. 43, pp. 1157-1169, . Nada, S.A.; El-Batsh, H. and Moawed, M. 2007 Local
5 Hydrodynamic investigation of two-phase flow in complex pipeline configurations with reference erosion-corrosion, The 10th International Mining, Petroleum, and Metallurgical Engineering Conference, March 6-8. Doheim, M.A., El-Batsh, H. M., Hassan, A.F. 2007 Local
6 Investigations of three-dimensional flow field development in an axial compressor cascade, 11047, International Mechanical Engineering Congress & Exposition, November 11 – 14, 2019, Salt Lake City, Utah El-Shahat, S., El-Batsh, H., Attia, A., Guojun, L., Lee, F, 2019 Local
7 Modelling Particle deposition on compressor and turbine blade surfaces. Projekte an den Zentralen Applikationsservern 1999, Bericht des EDV-Zentrums der Technischen Universität Wien, pp. 185 – 194 El-Batsh, H 1999 Local
8 Numerical and experimental prediction of secondary flow through a rectilinear cascade for different aspect ratios, International Mechanical Engineering Conference, Kuwait, December 5-8. El-Batsh H. and Bassily Hanna, M. 2004 Local
9 Numerical and experimental study of the flow field and particle dynamics through cyclone separators, ASME/ATI Conference on Energy: Production Distribution and Conservation, Milan, Italy, May 14-17. El-Batsh H.., Abd El-Hamied A.A, Hamed, M.H. 2006 Local
10 Numerical study for the flow field and power augmentation in a horizontal axis wind turbine, Sustainable Energy Technologies and Assessments 31, 2019, 245-253 Abdelwaly, M. El-Batsh, H., Hanna, M., 2019 Local
11 Numerical study of the flow field through a transonic linear turbine cascade at design and off-design conditions, 4th International Engineering Conference, Mansoura-Sharm El-Shiekh, April 20-22, 2004 and published also at Journal of Turbulence, Volume 7, No. 5. El-Batsh H. 2006 Local
12 Passive Flow Separation Control in Linear Compressor Cascade, October 2019, Novel Intelligent and Leading Emerging Sciences Conference (NILES) Mohamed EL-Sheikh ; Hesham El-Batsh ; Attia Ali M.A. ; El-Sayed Zanoun, 2020 Local
13 Performance of Impulse ventilation system in an underground car park fire: case study, Journal of Building Engineering, 29, 2020. 101161. Barsim, M., Bassily, M., El-Batsh, H., Rihan, Y. H., Sherif, M.M., 2020 International
14 Prediction for the mass transfer and oxygen corrosion in complex pipelines, Proceedings of ICFDP9, Ninth International Congress of Fluid Dynamics & Propulsion, December 18-21 Alexandria, Egypt. Doheim, M., El-Batsh, H., Hassan, A. 2008 Local
15 Reducing tip leakage flow by modifying the tip geometry of a turbine blade, accepted for publication at the scientific Bulletin, Faculty of Engineering, Ain Shams University. El-Batsh, H. 1950 Local
16 Steam generator mathematical model and its application on practical data, The Eighth International Conference for Mechanical Power Engineering, Alexandria University, Alexandria, Egypt, April 27-29 Awad, T., Hamoudda, R., El-Batsh, H. 1993 Local
17 A study of the loss generated due to the tip clearance flow downstream of an annular turbine cascade, ICFD10-EG-3056, Tenth International Congress of Fluid Dynamics,December 16-19, Stella Di Mare Sea Club Hotel, Ain Soukhna, Red Sea, Egypt, 2010 El-Batsh, H. , M. Bassily Hanna, 2010 Local
18 An investigation on the effect of endwall movement on the tip clearance loss using annular turbine cascade, International Journal of Rotating Machinery, 2011, Article ID 489150, 11 pages. El-Batsh, H., Bassily Hanna, M., 2014 International
19 Combustion characteristics of jojoba methyl ester as an alternative fuel for gas turbine, accepted for publication at ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-39991, November 14-20, 2014, Montreal, Canada Attia, A., El-Zoheiry, R., El-Batsh, H., Shehata, M. 2014 Local
20 Effect of Elbows on the Flow through Complex Pipeline Configurations, Part 1: Single-Phase Flow, submitted for publication at the Computer and Fluids. El-Batsh, H. M , Doheim, M.A.,., Hassan, A.F. 1950 Local
21 Effect of exit pipe on the flow and particle separation in tangential inlet cyclone separators, Bulletin of the Faculty of Engineering, Faculty of Engineering, Minia University. Vol. 31, No.1 El-Batsh, H., 2012 Local
22 Effect of gas and surface temperatures on particle deposition on turbine blades. Fourth European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics, Florence, Italy, March 20 - 23. El-Batsh H., Haselbacher H. 2001 Local
23 Effect of particle deposition on the performance of turbine blades. Projekte an den Zentralen Applikationsservern 2000, Bericht des EDV-Zentrums der Technischen Universität Wien, pp. 139 – 148. El-Batsh, H. 2000 Local
24 Effect of secondary flows on heat transfer of a gas turbine blade, International Journal of Rotating Machinery, Volume 2013, Article ID 79784 El-Batsh, H., Nada, S., Abdo, S., Mohamed, A., 2013 Local
25 Effect of squealer tip on the aerodynamic losses downstream of an annular turbine cascade, accepted for publication at Mansoura Engineering Journal, Vol. 37, No.1, M24-M39. El-Batsh, H., 2012 Local
26 Effect of the radial pressure gradient on the secondary flow generated in an annular turbine cascade, International Journal of Rotating Machinery, 2012, Article ID 509209, 14 pages El-Batsh, H., 2012 Local
27 Effect of the tip clearance gap on the flow and loss mechanism through a linear turbine cascade, ICFD10-EG-3055, Tenth International Congress of Fluid Dynamics El-Batsh, H. , Bassily Hanna, M., Mohamed, , Sherif, M., 2010 International
28 Effect of waste cooking oil methyl ester jet A-1 fuel blends on emission and combustion characteristics of a swirl stabilized lean pre-vaporized premixed flame, Fuel 267, 117203, 2020. Belal Y. Belal, Ali M.A. Attia, . H. M. El-Batsh, H.A. Moneib, 2020 International
29 Effect of Wind Tunnel Blockage on the Performance of a Horizontal Axis Wind Turbine with Different Blade Number, Energies 2019, 12(10), 1988. Eltayesh, A., Bassily Hanna, M. Castellani, F., Huzayyin, A.S. , El-Batsh, H., Burlando, M., and Becchetti, M., 2019 International
30 Effect of wind turbine shroud on the flow and power generated from a horizontal-axis shrouded wind turbine, 1st Aviation Engineering Innovations Conference, 21-22 March 2015, Luxor, Egypt Abdelwaly, M., Bassily Hanna, M., El-Batsh, H. 2015 Local
31 Effect of wind turbine shroud on the flow and power generated from a horizontal-axis shrouded wind turbine, accepted for publication at ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-38547, November 14-20, 2014, Montreal, Canada El-Batsh, H., Bassily Hanna, M., Abdelwaly, M., 2014 Local
32 Effect of wind turbine shroud on the flow and power generated from a horizontal-axis shrouded wind turbine, ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-38547, November 14-20, 2014, Montreal, Canada El-Batsh, H., Bassily Hanna, M., Abdelwaly, M., 2014 International
33 Effects of alumina nanoparticles additives into jojoba methyl ester-diesel mixture on diesel engine performance, ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-39988, November 14-20, 2014, Montreal, Canada Attia, A., El-Seesy, A., El-Batsh, H., Shehata, M. 2014 Local
34 Experimental and numerical investigation for PV cooling by forced convection Ahmed Hussien , Abdelgalil Eltayesh, Hesham M. El-Batsh 2023 Local
35 Experimental and Numerical Investigation for the Aerodynamics of a Linear Compressor Cascade, 1st Aviation Engineering Innovations Conference, 21-22 March 2015, Luxor, Egypt El-Batsh, H., Attia, Ali, El-Shahat, S. 2015 International
36 Experimental and numerical investigation of a condensation repellent radiant cooling panel system, Accepted for publication at the Journal of Engineering Sciences, Faculty of Engineering, Assiut University, Vol. 40, No. 4 Huzayyin, A., El-Batsh, H., Nada, S., Seyam, S., 2012 Local
37 Experimental and numerical investigation of the radiant panel heating system using scale room model, Energy and Buildings 82, 130–141, 2014. Seyam, Sh., Huzayyin, A., El-Batsh, H., Nada, S. 2014 Local
38 Experimental and numerical investigations of pressure loss and 3-D flow separations in a linear compressor cascades, 10686, International Mechanical Engineering Congress & Exposition, November 11 – 14, 2019, Salt Lake City, Utah El-Shahat, S., El-Batsh, H., Attia, A., Guojun, L., Lee, F, 2019 International
39 Experimental and numerical study of the flow field and forced convection around semi-circular tube in cross flow at different angles of attack, Scientific Bulletin, Faculty of Engineering, Ain Shams University, Vol. 40, No. 2, June 30. Nada, S.A.; El-Batsh, H. and Moawed, M. 2005 Local
40 flame and emissions characteristics of waste cooking oil- jet a-1 blend of 20% using lean pre-vaporized pre-mixed combustion technique, Proceedings of ICFD13, Thirteenth International Conference of Fluid Dynamics 21-22 December, 2018, Cairo, EGYPT Belal Y. Belal, Ali M.A. Attia, . H. M. El-Batsh, H.A. Moneib 2018 International
41 Froude scaling modeling in an Atrium Fire equipped with natural and transient forced ventilation, International Journal of Ventilation, 2019 Barsim, M., Bassily, M., El-Batsh, H., Rihan, Y. H., Sherif, M.M., 2019 Local
42 Hydrodynamic investigation of single-phase flow in complex pipeline configurations with reference erosion-corrosion, The 10th International Mining, Petroleum, and Metallurgical Engineering Conference, March 6-8, Doheim, M.A., El-Batsh, H. M., Hassan, A.F. 2007 Local
43 Hydrodynamic investigation of two-phase flow in complex pipeline configurations with reference erosion-corrosion, The 10th International Mining, Petroleum, and Metallurgical Engineering Conference Doheim, M.A., El-Batsh, H., Hassan, A.F. 2007 Local
44 Improving cyclone performance by proper selection of the exit pipe, Applied Mathematical Modelling, vol. 37, pp. 5286-5303. El-Batsh, H., 2013 Local
45 Modelling particle deposition on compressor and turbine blade surfaces. Projekte an den Zentralen Applikationsservern 1998, Bericht des EDV-Zentrums der Technischen Universität Wien, pp. 163 – 172 El-Batsh, H 1998 Local
46 Numerical and experimental aerodynamic investigation on shrouded wind turbines and estimation of power generation, Bulletin of the Faculty of Engineering, Faculty of Engineering, Minia University. Vol. 31, No.1 El-Batsh, H., Bassily Hanna, M., 2012 Local
47 Numerical simulation of an experimental atrium fires in combined natural and forced ventilation by CFD, International Journal of Ventilation, 2019, 1-24 Barsim, M., Bassily, M., El-Batsh, H., Rihan, Y. H., Sherif, M.M. 2019 International
48 Numerical study of the effect of changing the cyclone cone length on the gas flow field, Applied Mathematical Modelling, vol. 46, 2017, pp. 81–97. Hamdy, O., Bassily, M., El-Batsh, H., Mekhail, T., 2017 International
49 On the application of mixture model for two-phase flow induced corrosion in a complex pipeline configuration, Applied Mathematical Modelling, Vol. 36, 2012, pp. 5686–5699. El-Batsh, H., Doheim, M. A., and Hassan, A. F., 2012 International
50 Prediction for the mass transfer and oxygen corrosion in complex pipelines, ICFDP9-EG-271, Proceedings of ICFDP9, Ninth International Congress of Fluid Dynamics & Propulsion, Doheim, M., El-Batsh, H., Hassan, A., 2008 International
51 Prediction of Hydrogen Sulfide Corrosion in Petroleum Refinery Complex Pipelines, ICFD10-EG-3063, Tenth International Congress of Fluid Dynamics, December 16-19, Stella Di Mare Sea Club Hotel, Ain Soukhna, Red Sea, Egypt Dohem, M.,El-Batsh, H., Hassan, A. 2010 International
52 Studying of heat transfer and fluid flow characteristics, 1st Aviation Engineering Innovations Conference, 21-22 March 2015, Luxor, Egypt Bassily Hanna, M., El-Batsh, H., Dyab, M., Abdelsamee, A. 2015 Local
53 The effect of Aluminum oxide nanoparticles addition with Jojoba methyl ester-diesel fuel blend on a diesel engine performance, combustion and emission characteristics, Fuel 224, 147-166, 2018. El-Seesy, A., Attia, A., El-Batsh, H., 2018 Local
54 Three Dimensional Heat Transfer Characteristics through a Linear Gas Turbine Cascade, Journal of Engineering Sciences, Faculty of Engineering, Assiut University, pp. 947-970. El-Batsh, H., Nada, S., Abdo, S., Mohamed, A., 2013 Local
Hassan Fawzy Mohamed Elattar
Local Publication (1)
International Publication (22)
Total (23)
# Publication Authors Year Localization
1 A modified method of calculating the heating load for residential buildings A. Fouda, Z. Melikyan, M.A. Mohamed, H.F. Elattar 2014 International
2 Air-side performance of a wavy-finned-tube direct expansion cooling and dehumidifying air coil A.S. Huzayyin; S.A. Nada; H.F. Elattar 2007 International
3 An integrated A/C and HDH water desalination system assisted by solar energy: Transient analysis and economical study A. Fouda, S.A. Nada, H.F. Elattar 2016 International
4 Augmentation of solar‐assisted humidification‐dehumidification water desalination system using heat recovery and thermal energy storage system A Fouda, SA Nada, ASB Mahfouz, A Al‐Zahrani, HF Elattar 2020 International
5 CFD modeling using PDF approach for investigating the flame length in rotary kilns H. F. Elattar, E. Specht, A. Fouda, Abdullah S. Bin‑Mahfouz 2016 International
6 Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank M.H. Mohamed, Abd El -Nabi Z. El -Sayed K. F. Megalla, H.F. Elattar. 2021 Local
7 Energy‐efficient hybrid A/C and freshwater production system proposed for high latent load spaces Sameh A. Nada, Hassan F. Elattar, Ali Fouda 2019 International
8 Enhancing the performance of a CO2 combined refrigeration and power (CRP) cycle driven by engine exhaust gas by using heat exchangers in optimized locations H.F. Elattar; S.A. Nada 2022 International
9 Experimental investigation of air-conditioning and HDH desalination hybrid system using new packing pad humidifier and strips-finned helical coil S.A. Nada, A. Fouda, M.A. Mahmoud, H.F. Elattar 2021 International
10 Experimental investigation of energy and exergy performance of a direct evaporative cooler using a new pad type S.A. Nada, A. Fouda, M.A. Mahmoud, H.F. Elattar 2019 International
11 Experimental study for hybrid humidification–dehumidification water desalination and air conditioning system S.A. Nada , H.F. Elattar , A. Fouda 2016 International
12 Experimental study for hybrid humidification–dehumidification water desalination and air conditioning system S.A. Nada, H.F. Elattar, A. Fouda 2015 International
13 Humidification-dehumidification water desalination system integrated with multiple evaporators/condensers heat pump unit Hassan F. Elattar, Sameh A. Nada, Ahmed Al-Zahrani, Ali Fouda 2020 International
14 Investigation of the condensation process of moist air around horizontal pipe A. Fouda , M.G. Wasel , A.M. Hamed , El-Shafei B. Zeidan , H.F. Elattar 2015 International
15 Investigation of the condensation process of moist air around horizontal pipe A. Fouda, M.G. Wasel, A.M. Hamed, El-Shafei B. Zeidan, H.F. Elattar 2015 International
16 Modeling and performance study of a parabolic trough solar power plant using molten salt storage tank in Egypt: effects of plant site location M. H. Mohamed, A. Z. El-Sayed, K. F. Megalla, H. F. Elattar 2019 International
17 Numerical investigation of heat transfer in annulus laminar flow of multi tubes-in-tube helical coil S. A. Nada, H. F. Elattar, A. Fouda, H. A. Refaey 2018 International
18 Performance analysis of proposed hybrid air conditioning and humidification–dehumidification systems for energy saving and water production in hot and dry climatic regions S.A. Nada , H.F. Elattar , A. Fouda 2016 International
19 Performance analysis of proposed hybrid air conditioning and humidification–dehumidification systems for energy saving and water production in hot and dry climatic regions S.A. Nada, H.F. Elattar, A. Fouda 2015 International
20 Performance enhancement and heat and mass transfer characteristics of direct evaporative building free cooling using corrugated cellulose papers S.A. Nada, H.F. Elattar, M.A. Mahmoud, A. Fouda 2021 International
21 Semi analytical parametric study of rewetting/quenching of hot vertical tube by a falling liquid film in the presence of countercurrent flow of rising vapors S.A. Nada, H.F. Elattar 2016 International
22 Swirled Jet Flame Simulation and Flow Visualization Inside Rotary Kiln—CFD with PDF Approach Hassan F. Elattar, Eckehard Specht, Ali Fouda, Saeed Rubaiee, Ahmed Al-Zahrani and Sameh A. Nada 2020 International
23 Thermal and hydraulic numerical study for a novel multi tubes in tube helically coiled heat exchangers: Effects of operating/geometric parameters H.F. Elattara, A. Fouda, S.A. Nada, H.A. Refaey, A. Al-Zahrani 2018 International
MOHAMED Anwer Kamel RADY
Local Publication (43)
International Publication (0)
Total (43)
# Publication Authors Year Localization
1 A dual-scale coupled micro/macro segregation model for dendritic alloy solidification, Heat Mass Transfer , 42, 1129-1141. Mohamed Rady and Eric Arquis 2006 Local
2 A fixed domain model for microsegregation during alloy solidification, Heat and Mass Transfer, Vol. 41, pp. 545-558. Eric Arquis and Mohamed Rady 2005 Local
3 A micro/macro model for numerical simulation of dendritic alloy soldification, Modeling of Casting, Welding and Advanced Solidification Processes XI MCWASP Conference, Opio, France, May. M. Rady and E. Arquis 2006 Local
4 A numerical investigation and parametric study of cooling an array of multiple protruding heat sources by a laminar slot air jet, International Journal of Heat and Fluid Flow, Volume 28, Issue 4, pp. 787-805. E. Arquis, M. A. Rady, S.A. Nada 2007 Local
5 A Simulation Model for Natural Circulation Solar Energy Water Heaters, International Solar Energy Conference, Solar Energy Society, Cairo,Egypt Mobarak, A., Salak, M., Huzyyin, A., and Rady, M. A. 1992 Local
6 A study on the performance of convection schemes using a unified control-volume formulation, 2nd Minia International conference for Advanced Trends in Engineering, 7-9 April. M. A. Rady 2002 Local
7 An experimental study of fluid flow characteristics around a semi-circular tube, Proceeding of the 10th Int. AMME conference, 14-16 May, pp.625-636. Rady, M. A., Moawed M., Ibrahim E. Z., and Elsayed A. O. 2002 Local
8 Buoyancy effects on the flow and heat transfer characteristics of an impinging semi-confined laminar slot jet, Int. J. of Transport Phenomena, Vol. 2, pp.113-126. M. A. Rady 2000 Local
9 Characterization of granular phase changing composites for thermal energy storage using the T-history method, International Journal of Energy Research, DOI: 10.1002/er.1560. Mohamed Rady, Eric Arquis, and Cedric Le Bot 2008 Local
10 Convection naturelle dans des systèmes mixtes fluide-poreux de grande extension : application à l’isolation de l’habitat, Congrès Français de Thermique, SFT 2006, Île de Ré, 16-19 mai. Eric ARQUIS, Mohamed RADY and Cristian CIUCASU 2006 Local
11 Convection Phenomenon in mineral wool installed on vertical walls, Building Physics Symposium, 29-31 Oct., Katholieke Universitiet, Belgium. E. Arquis, M. Rady and J. Gilles 2008 Local
12 Convection phenomenon in mineral wool installed on vertical walls, Int. Congres “New Tendances in Thermal Insulation of Buildings, Moscou (Russie), 7-10 Novembre. Eric ARQUIS, Mohamed RADY and Cristian CIUCASU 2006 Local
13 Cooling an array of multiple heat sources by a row of slot air jets, Journal of Engineering Sciences, Faculty of Engineering, University of Assiut, Egypt, Vol. 32, No. 2, pp. 837-858. Huzayyin, A. S., Nada, S. A., Rady, M. A., and Faris, A. 2004 Local
14 Détermination des conditions de contact de milieux avec cinétique de solidification rapide. Congrès français de Thermique, Société Française de Thermique. Toulouse. F. Loghmari, C. Le Bot, M. Rady, D. Delaunay, D. Gobin 2008 Local
15 Determination of Two media contact conditions during rapid solidification : Application for droplet impact and solidification 22^nd European Conference on Liquid Atomization and Spray Systems, Como Lake, Italy. F. Loghmari, C. Le Bot, M. Rady, D. Delaunay, D. Gobin 2008 Local
16 Effect of Tank Elevation on Natural Circulation Solar Energy Water Heaters, International Solar Energy Conference, Solar Energy Society, Cairo, Egypt. Mobarak, A., Salak, M., Huzyyin, A., and Rady, M. A. 1992 Local
17 Effects of exhaust port geometry and confinement surface protrusions on heat transfer behavior of impinging slot jets,4th International conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Cairo-Egypt. Mohamed Rady and Eric Arquis 2005 Local
18 Effects of liquid superheat during solidification of pure metals in a square cavity, Heat and Mass Transfer, Vol. 32, pp.499-509. Rady, M. A., Satyamurty V. V., and Mohanty A. K. 1997 Local
19 Etude de l’ascension d’un glaçon sphérique au sein d’une colonne d’eau, Congrès Français de Thermique, SFT 2006, Île de Ré, 16-19 mai . Jean-Pierre BEDECARRATS, Yves LE GUER, Jean-Pierre DUMAS, Eric ARQUIS and Mohamed RADY 2006 Local
20 Etude des transferts de masse et de chaleur dans un lit déshumidificateur déshydratant à matériau à changement de phase macroencapsulé, 8th JEMP, Lyon, France. M. A. Rady, A. S. Huzayyin, E. Arquis, C. Le Bot, P. Monneyron, E. Palomo 2007 Local
21 Experimental and numerical investigations on the performance of dehumidifying desiccant beds composed of silica-gel and thermal energy storage particles, Heat and Mass transfer, Vol. 45, pp. 545-561. M. A. Rady 2009 Local
22 Experimental Evaluation of Diesel Engine Performance and emission using blends of jojoba oil and Diesel fuel, Energy Conversion and Management, Vol. 45 , pp.2093-2112. Huzayyin, A. S., Bawady, A. H., Rady M. A., and Dawood, A. 2004 Local
23 Experimental investigation of free convection from a horizontal semicircular cylinder at different orientations, Journal of Engineering Sciences, Assuit University, Vol. 30, No. 3, pp.731-744. Nada, S. A., Rady, M. A., Mowad, M. 2002 Local
24 Fusion d’une particule en "sédimentation", Congrès Français de Thermique, Presqu île de Giens, 25-28 Mai, SFT , Volume 1, pp.149-154. Eric Arquis and Mohamed Rady 2004 Local
25 Heat and mass transfer in a composite bed of silica gel and macro-encapsulated PCM for dehumidification, EUROTHERM , Indohoven, Netherlands. M. A. Rady, A. S. Huzayyin , E. Arquis, P. Monneyron, C. Le Bot 2008 Local
26 Heat transfer enhancement of multiple impinging slot jets with symmetric exhaust ports and confinement surface, Applied Thermal Engineering, Vol. 26, 1310-1319. M. Rady and E. Arquis 2006 Local
27 Heat transfer enhancement of multiple impinging slot jets with symmetric exhaust ports and confinement surface, Applied Thermal Engineering, Vol. 26, 1310-1319. M. Rady and E. Arquis 2006 Local
28 Heat transfer modelling within graphite/PCM composite materials for high temperature energy storage, Ecostock 2006, The tenth international conference on thermal energy storage, May 31 –June 2,at the Richard Stockton College of New Jersy, USA. V. Morisson, E. Palomo Del Barrio, M. Rady 2006 Local
29 Natural convection during melting and solidification of pure metals in a cavity, Numerical Heat Transfer, Part A, Vol. 29, pp.49-63. Rady, M. A. and Mohanty A. K. 1996 Local
30 Natural convection melting of ice spheres in water filled cylindrical enclosures, 4th ICCHMT-Paris, Progress in computational heat and mass transfer, Vol. 2, pp. 1113-1118. Eric Arquis, Mohamed Rady, and Guillaume Novelli 2005 Local
31 Numerical approaches for microscopic modelling of solute redistribution during solidification of binary alloys, Heat and Mass Transfer, 42: 347–358. M. A. Rady and E. Arquis 2006 Local
32 Numerical approaches for microsegregation modelling during alloy solidification, Poster session, International conference of crystal growth, Grenoble, France, August. E. Arquis and M. Rady 2004 Local
33 Numerical simulation of microsegregation during dendritic solidification of binary alloys, Journal of Engineering Sciences, Faculty of Engineering, University of Assiut, Egypt, Vol. 32, No. 3, pp. 1147-1168. Eric Arquis and Mohamed Rady 2004 Local
34 On the numerical modeling of alloy solidification using a single-domain coupled dual-scale model, 4th International conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Cairo-Egypt. Mohamed Rady and Eric Arquis 2005 Local
35 Performance and emission characteristics of Diesel engine using blends of jojoba oil and jojoba methyl ester with gas oil, Journal of Engineering Sciences, Faculty of Engineering, Ain Shams University, Egypt, Vol. 39, No. 2, pp. 473-495. Huzayyin, A. S., Bawady, A. H., Rady M. A., and Dawood, A. 2004 Local
36 Single domain analysis of natural convection during melting and solidification of pure metals, ISHMT conference, pp.297-302, Surathkal, Karnatka, India. Rady, M. A. and Mohanty A. K. 1995 Local
37 Solidification of hypereutectic and hypoeutectic binary alloys with buoyancy and surface tension driven natural convection, Heat and Mass Transfer, Vol. 34, pp.337-347. Rady, M. A. and Nada, S. A. 1998 Local
38 Study of heat and mass transfer in a dehumidifying desiccant bed with macro-encapsulated phase change materials, Renewable Energy, 34, pp. 718–726 M. A. Rady, A. S. Huzayyin, E. Arquis, C. Le Bot, P. Monneyron, E. Palomo 2009 Local
39 Study of natural convection heat transfer in a finned horizontal fluid layer, International Journal of Thermal Sciences,Vol. 44, pp. 43-52. Eric Arquis and Mohamed Rady 2005 Local
40 Systèmes de stockage d’énergie thermique couplés à la production d’électricité par des technologies solaires thermodynamiques, Récents Progrès en Génie des Procédés, Numéro 92. Morrisson Vincent, Rady Mohamed, Palomo Elena et Arquis Eric 2005 Local
41 Thermal Energy Storage Systems for Electricity Production Using Solar Energy Direct Steam Generation Technology, Chemical Engineering and Processing, vol. 47, pp. 499-507. MORISSON Vincent, RADY Mohamed, PALOMO Elena and ARQUIS Eric 2008 Local
42 Thermally Buoyant combined convection of saline water through vertical pipes, IDA World Congress, Abu Dhabi. Rady, M. A. and Mohanty A. K. 1995 Local
43 Thermosolutal convection and macrosegregation during solidification of hypereutectic and hypoeutectic binary alloys in statically cast trapezoidal ingots, Metallurgical and Materials Transactions, Vol. 28 B, pp.943-954 Rady, M. A., Satyamurty V. V., and Mohanty A. K . 1997 Local
Mohamed Said Attia Shehata
Local Publication (0)
International Publication (15)
Total (15)
# Publication Authors Year Localization
1 Combustion Characteristics for Turbulent Prevaporized Premixed Flame Using Commercial Light Diesel and Kerosene Fuels Shehata S. Mohamed, MohamedM. ElKotb M. Mohamed, and Salem Hindawi 2014 International
2 COMBUSTION CHARACTERISTICS OF JOJOBA METHYL ESTER AS AN ALTERNATIVE FUEL FOR GAS TURBINE Ali M.A. Attia Mechanical Engineering Department, Benha Faculty of Engineering, Benha University 13512 - Benha, Qalubia, Egypt ali.attia@bhit.bu.edu.eg Radwan M. El-Zoheiry Mechanical Engineering Department, Benha Faculty of Engineering, Benha Univ 2014 International
3 Corn and soybean biodiesel blends as alternative fuels for diesel engine at different injection pressures M.S. Shehata a, Ali M.A. Attia a,⇑, S.M. Abdel Razek b a Mechanical Engineering Department, Faculty of Engineering, Benha University, Egypt b Mechanical Engineering Department, Faculty of Engineering, Miser University for Science and Technology, 6th Oct 2015 International
4 Cylinder Pressure, Performance Parameters, Heat Release, Specific Heats Ratio and Duration of Combustion for Spark Ignition Engine Shehata S. M 2010 International
5 Effect of flame stabilizer geometry on emissions of turbulent premixed blended flames M.M. ElKotb, and M. S. Shehatta 2003 International
6 EFFECT OF NOZZLE HOLE AND PUMP PLUNGER DIAMETERS ON PERFORMANCE AND EMISSIONS OF DIESEL ENGINE 2016 International
7 EFFECTS OF ALUMINA NANOPARTICLES ADDITIVES INTO JOJOBA METHYL ESTER-DIESEL MIXTURE ON DIESEL ENGINE PERFORMANCE Ali M.A. Attia Mechanical Engineering Department, Benha Faculty of Engineering, Benha University 13512 - Benha, Qalubia, Egypt ali.attia@bhit.bu.edu.eg Ahmed I. El-Seesy Mechanical Engineering Department, Benha Faculty of Engineering, Benha Univers 2014 International
8 Emission and Wall Temperature for Lean Prevaporized Premixed Gas Turbine Combustor Shehata S. M., 2009 International
9 Emissions, performance and cylinder pressure of diesel engine fuelled by biodiesel fuel Mohamed Saied Shehata 2013 International
10 ENGINE PERFORMANCE PARAMETRES AND EMISSIONS REDUCTION METHODS FOR SPARK IGNITION ENGINE M. S. SHEHATA and S. M. ABDEL RAZEK 2008 International
11 Exhaust Gas Emissions Control and Utilization of Exhaust Waste Heat for Water Desalination By Prof. Dr. M. Shehata, Dr. Salem A. Algarni, Amer Hmood Alharthi1 and Awad Yahay Asiri2 1Mechanical Engineering department; Faculty of Engineering; King Khalid University;Abha, Saudi Arabia 2College of Technology, Automative and Vehical Department, 2016 International
12 Exhaust Gas Emissions Control and Utilization of Exhaust Waste Heat for Water Desalination Prof. Dr. M. Shehata, Dr. Salem A. Algarni, Amer Hmood Alharthi1 and Awad Yahay Asiri2 1Mechanical Engineering department; Faculty of Engineering; King Khalid University;Abha, Saudi Arabia 2College of Technology, Automative and Vehical Department, Abha 2016 International
13 Experimental investigation of diesel engine performance and emission characteristics using jojoba/diesel blend and sunflower oil Shehata S. M., and Abdel Razek S. M. 2011 International
14 Factors Affecting NOX Formation In Turbulent Premixed Confined Flames M.M. ElKotb, Thawat Abou-Arab, Hindawi Salem and M. S. Shehata 1990 International
15 Laminar Burning Velocity and Explosion Index of LPG_Air and Propane_Air Mixture Huzayyin S. A., Moneib A. H., Shehatta S.M. Attia A. M. A. 2008 International
Saleh hemida mohamed Kaytbay
Local Publication (0)
International Publication (4)
Total (4)
# Publication Authors Year Localization
1 Characterization of Copper Carbon Composites Manufactured Using Electro-Less Precipitation Process Medhat El-Hadek a & Saleh Kaytbay 2012 International
2 Fracture Properties of SPS Tungsten Copper Powder Composites Medhat Awad El-Hadek & Saleh HamadaKaytbay 2013 International
3 PROCESSING OF METALLIC FILTERS BY POWDER METALLURGY TECHNIQUE W. Daoush, S. Moustafa, S. Kayetbay 2006 International
4 THE PREPARATION OF HIGHLY POROUS STRUCTURES FROM ASTALOY IRON POWDER S. F. Moustafa, S. H. Kaytbay 2006 International
Sameh A. Nada
Local Publication (26)
International Publication (39)
Total (65)
# Publication Authors Year Localization
1 "Cooling an array of multiple heat sources by a row of slot air jets", International Journal of Heat and Mass Transfer, Vol. (49), pp. 2597-2609. A.S. Huzyyien, S.A. Nada, M.A. Rady, and A. Faris. 2006 Local
2 "Heat and mass transfer between air and desiccant falling film in a finned-tube arrangement for different flow configurations", Journal of Engineering Sciences, Faculty of Engineering, University of Assiut, Egypt, Vol. (31), No. (2), pp. 305-320. S.A. Nada. 2003 Local
3 "Heat transfer to two-component two-phase flow in steam heated horizontal tube" Journal of Engineering Sciences, Faculty of Engineering, Ain Shams University, Egypt, Vol. (32), No. (2), pp. 337-347. S.A. Nada. 2004 Local
4 "Performance of a two-phase closed thermosyphon solar collector with a shell and tube heat exchanger", Applied Thermal Engineering, Vol. (24), No. (13), pp. 1959-1968. S.A. Nada, H.H. El-Ghetany, and H.M.S. Hussein. 2004 Local
5 "Performance of wickless heat pipe flat plate solar collectors having different pipes cross sections geometries and filling ratios” Energy conversion and management, Vol. (47), pp. 1539-1549. H.M.S. Hussein, H.H. El-Ghetany, S.A. Nada 2006 Local
6 "Solidification of hypereutectic and hypoeutectic binary alloys with buoyancy and surface tension driven natural convection", Heat and Mass Transfer, Vol. (34), No. (4), pp. 337-347. M.A. Rady, S.A. Nada, 1998 Local
7 "Theoretical study of heat transfer from saturated vapour condensing outside inclined tubes", Proceeding of The Eighth International Conference for Mechanical Power Engineering, Faculty of Engineering, Alexandria University, Egypt, Vol. (3), pp. 31-43, April 27-29. M. S. Abdel-Salam, A. F. El-Dib, H. Assaf, and S.A. Nada. 1993 Local
8 “A numerical investigation and parametric study of cooling an array of multiple protruding heat sources by a laminar slot air jet”, International journal of Heat and Fluid Flow, Vol. (28), pp. 787-805, . E. Arquis, M. A. Rady, S.A. Nada 2007 Local
9 “Air-side Performance of a wavy-finned-tube direct expansion cooling and dehumidifying air coil” International journal of refrigeration, Vol. (30), pp. 230-244. A. S. Huzayyin, S.A Nada, H.F. Elattar 2007 Local
10 “Slot/slots air jet impinging cooling of a circular cylinder for different jets-cylinder configurations", Heat Mass Transfer, Vol. (43), No. (2), pp. 135-148. S.A. Nada. 2006 Local
11 "Two-phase countercurrent flow limitations in vertical pipe" The Tenth International Conference of Mechanical Power Engineering, Faculty of Engineering, Assiut University, Egypt. S.A. Nada, A.S. Huzayyin, M. Shoukri, A. F. El-Dib, A. Anddul-Razzak 1997 Local
12 “Experimental Investigation of natural convection heat transfer in horizontal and inclined annular fluid layer’’ Heat Mass Transfer, Vol. (44), No. (8), pp. 929-936. S.A. Nada 2008 Local
13 "Filmwise Condensation of Saturated Steam on Inclined Smooth Tubes", Journal of Engineering and Applied Science, Faculty of Engineering, Cairo University, Vol. (41), No. (2), pp. 389-403. M. S. Abdel-Salam, A. F. El-Dib, H. Assaf, and S.A. Nada, 1994 Local
14 "Flow regimes and drift flux correlations for gas-liquid flow in large diameters vertical pipes", International Congress on Fluid dynamics & Propulsion, Cairo, Egypt, December 29-31. S.A. Nada, A. Abdul-Razzak, B. Stankovic, and M. Shoukri. 1996 Local
15 "Free convection from a vertical and inclined semicircular cylinder at different orientations", Alexandria Engineering Journal, Faculty of Engineering, Alexandria University, Egypt, Vol. (42), No. (3), pp. 273-282. S.A. Nada, and M. Moawed. 2003 Local
16 "Free convection in tilted rectangular enclosures heated at the bottom wall and vented by different slot-venting arrangements", Experimental Thermal and Fluid Science, Vol. (28), No. (8), pp. 853-862,. S.A. Nada, M. Moawad. 2004 Local
17 “Natural convection heat transfer in horizontal and vertical closed narrow enclosure with heated rectangular finned base plate’’ Int. J. Heat Mass Transfer, Vol. (50), pp. 667-679. S.A. Nada 2007 Local
18 " A simple model for rewetting of hot tubes limited by flooding", Fifth International Conference on Simulation Methods in Nuclear Engineering, Montreal, Canada, September 8-11. S.A. Nada, M. Shoukri, A.S. Huzayyin, A.F. El-Dib, A. Abdul-Razzak 1996 Local
19 "Experimental investigation of free convection from a horizontal semicircular cylinder at different orientations", Journal of Engineering Sciences, Faculty of Engineering, University of Assiut, Egypt, Vol. (30), No. (3), pp. 731-744. S.A. Nada, M.A. Rady, and M. Mowad. 2002 Local
20 "Heat and mass transfer between air and desiccant falling film in a finned-tube arrangement for different flow configurations", Journal of Engineering Sciences, Faculty of Engineering, University of Assiut, Egypt, Vol. (31), No. (2), pp. 305-320 S.A. Nada 2003 Local
21 "Heat transfer and fluid flow around semi-circular tube in cross flow at different orientations", Heat and Mass Transfer, Vol. (43), No. (11), pp. 1157-1169. S.A. Nada, H. Elbatch, M. Mowad. 2007 Local
22 2. Experimental parametric study of cooling servers management in data center buildings 21. S.A. Nada, K.E. Elfeky, A.M.A Attia,W.G. Alshaer 2017 International
23 3. S.A. Nada, M.A. Said, M.A. Rady. Numerical investigation and parametric study for thermal and energy management enhancements in data centers buildings. Applied Thermal Engineering 98 (2016) 110-128. Elsevier. S.A. Nada, M.A. Said, M.A. Rady 2016 International
24 Air cooling-dehumidification/desiccant regeneration processes by a falling liquid desiccant film on finned-tubes for different flow arrangements S.A. Nada 2017 International
25 An integrated A/C and HDH water desalination system assisted by solar energy: Transient analysis and economical study A. Fouda, S.A. Nada, H.F. Elattar 2016 International
26 CFD investigation of airflow pattern, temperature distribution and thermal comfort of UFAD system for theater buildings applications S.A. Nada, H.M. El-Batsh, H.F. Elattar, N.M. Ali 2016 International
27 CFD investigations of data centers’ thermal performance for different configurations of CRACs units and aisles separation S.A. Nada, M.A. Said, M.A. Rady 2016 International
28 Comprehensive parametric study of using carbon foam structures saturated with PCMs in thermal management of electronic systems. Energy Conversion and Management 105 (2015) 93–102 S.A. Nada, W.G. Alshaer 2015 International
29 Comprehensive study on the effects of plenum depths on air flow and thermal managements in data centers S.A. Nada, M.A. Said 2017 International
30 Cooling of very hot vertical tubes by falling liquid film in presence of countercurrent flow of rising gases S.A. Nada 2015 International
31 Effect of CRAC units layout on thermal management of data center S.A. Nada, M.A. Said 2017 International
32 Effects of servers racks location and power loading configurations on the thermal management of data centers racks array S.A. Nada, K.E. Elfeky 2017 International
33 El-Batsh, H., Nada, S., Abdo, S. Mohamed, A., “Effect of Secondary flow on heat transfer of a gas turbine blad”, International Journal of Rotating Machinery, Vol. 2013, Article ID 797841, 2013. El-Batsh, H., Nada, S., Abdo, S. Mohamed, A. 2013 Local
34 El-Batsh, H., Nada, S., Abdo, S. Mohamed, A., “Three dimensional heat transfer characteristics through a linear cascade”, Journal of Engineering Sciences, Faculty of Engineering, Assiut University, Vol. 41, No. 3, May 2013, pp. 947-970. El-Batsh, H., Nada, S., Abdo, S. Mohamed, A. 2013 Local
35 Experimental Investigation and Empirical Correlations of Heat Transfer in Different Regimes of Air–Water Two-Phase Flow in a Horizontal Tube S.A. Nada 2017 International
36 Experimental investigation and general correlation of passive heat transfer in enclosures at different operating, orientations and venting configurations S.A. Nada, H.F. Elattar 2016 International
37 Experimental investigations of thermal managements solutions in data centers buildings for different arrangements of cold aisles containments. Journal of Building Engineering 5 (2016) 41–49 S.A. Nada, K.E.Elfeky 2016 International
38 Experimental parametric study of servers cooling management in data centers buildings S. A. Nada, K. E. Elfeky, Ali M. A. Attia, W. G. Alshaer 2017 International
39 Experimental study for hybrid humidification–dehumidification water desalination and air conditioning system S.A. Nada, H.F. Elattar, A. Fouda 2015 International
40 Experimental Study of Alumina Nanofluids Effects on Thermal Performance Efficiency of Flat Plate Solar Collectors A. A. Hawwash, A. K. Abdel-Rahman, S. Ookawara, S.A. Nada 2016 International
41 Experimental study of solving thermal heterogeneity problem of data center servers S.A. Nada, A.M.A. Attia, K.E. Elfeky 2016 International
42 General semi-empirical correlation for condensation of vapor on tubes at different orientations. International Journal of Thermal Sciences 100 (2016) 391e400 S.A. Nada, H.M.S. Hussein 2016 International
43 Huzayyin, A., El-Batsh, H., Nada, S., Seyam, S., “Experimental and numerical investigation of a condensation repellent radiant cooling panel system”, Journal of Engineering Sciences, Faculty of Engineering, Assiut University, Vol. 40, No. 4, July 2012, pp. 1075-1089. Huzayyin, A., El-Batsh, H., Nada, S., Seyam, S. 2012 Local
44 Numerical Investigation of Cooling of Electronic Servers Racks at Different Locations and Spacing from the Data Center Cooling Unit. International Journal of Current Engineering and Technology S.A. Nada, M.A. Rady, M. Elsharnoby and M. A. Said 2015 International
45 Numerical investigation of heat transfer in annulus laminar flow of multi tubes-in-tube helical coil S. A. Nada H.F. Elattar, A. Fouda, H. A. Refaey 2018 International
46 Numerical investigations of using carbon foam/PCM/Nano carbon tubes composites in thermal management of electronic equipment W.G. Alshaer, S.A. Nada, M.A. Rady, Cedric Le Bot, Elena Palomo Del Barrio 2015 International
47 Parametric study of flow field and mixing characteristics of outwardly injected jets into a crossflow in a cylindrical chamber. International Journal of Thermal Sciences 102 (2016) 185-201 S.A. Nada, A. Fouda, H.F. Elattar 2016 International
48 Performance analysis of proposed hybrid air conditioning and humidification–dehumidification systems for energy saving and water production in hot and dry climatic regions S.A. Nada, H.F. Elattar, A. Fouda 2015 International
49 Performance Enhancement of Shell and Helical Coil Water Coolers using Different Geometric and Fins Conditions S.A. Nada, EI Eid, GB Abd El Aziz, HA Hassan 2016 International
50 Performance Evaluation of Photovoltaic panel Integrated with Compound Parabolic Concentrator (CPC) Installed in Hot Arid Area Mohamed S.YOUSEF, Ali K. ABDELRAHMAN, S A. NADA AND S. OOKAWARA 2015 International
51 Performance investigation of a novel solar hybrid air conditioning and humidification–dehumidification water desalination system. Desalination 382 (2016) 28–42 H.F. Elattar , A. Fouda, S.A. Nada 2016 International
52 Performance of multi tubes in tube helically coiled as a compact heat exchanger S. A. Nada · W. G. El Shaer · A. S. Huzayyin 2015 International
53 S. A. Nada, M. Shoukri A.F. El-Dib and A. S. Huzayyin “Rewetting of hot vertical tubes by a falling liquid film with different directions of venting the generated steam”, International Journal of Thermal Sciences, Vol. 85 (2014) PP. 62-72. S. A. Nada, M. Shoukri A.F. El-Dib and A. S. Huzayyin 2014 International
54 S.A. Nada, A. Fouda, H.F. Elattar. Parametric study of flow field and mixing characteristics of outwardly injected jets into a crossflow in a cylindrical chamber. International Journal of Thermal Sciences 102 (2016) 185-20. Elsevier. S.A. Nada, A. Fouda, H.F. Elattar 2016 International
55 S.A. Nada, K.E. Elfeky, A.M.A Attia. Experimental investigations of air conditioning solutions in high power density data centers using a scaled physical model, International Journal of Refrigeration 63(2016) 87-99. Elsevier S.A. Nada, K.E. Elfeky, A.M.A Attia 2016 International
56 S.A. Nada, W.G. Alshaer, A.S. Huzayyin “Heat transfer and pressure drop characteristics of multi tubes in tube helically coiled heat exchanger”, JP Journal of Heat and Mass Transfer, Vol. 9, No. 2, 2014, PP. 172-202. S.A. Nada, W.G. Alshaer, A.S. Huzayyin 2014 International
57 Sameh A. Nada, Eldessouky I. Eid, Gamal B. Abd El Aziz, Hassan A. Hassan., “Heat Transfer enhancement in shell and helical coil with external radial fins” Proceeding of The Twelfth International Conference for Engineering (AEIC), AlAzhar University, Egypt, Vol. (3), pp. 350-369, Decemebr 25-27, 2012. Sameh A. Nada, Eldessouky I. Eid, Gamal B. Abd El Aziz, Hassan A. Hassan. 2012 Local
58 Semi analytical parametric study of rewetting/quenching of hot vertical tube by a falling liquid film in the presence of countercurrent flow of rising vapors. International Journal of Thermal Sciences 99 (2016) 85-95 S.A. Nada, H.F. Elattar 2016 International
59 Shiamaa Seyam, Ahmed Huzayyin, Hesham El-Batch, Sameh Nada “Experimental and numerical investigation of radiant panel heating system using scale room model”, Energy and buildings, Vol 82, 01/2014, pp. 130-141 Shiamaa Seyam, Ahmed Huzayyin, Hesham El-Batch, Sameh Nada 2014 International
60 Solutions of thermal performance problems of installing AC outdoor units in buildings light wells using mechanical ventilations S.A. Nada, M.A. Said 2018 International
61 Thermal management of electronic devices using carbon foam and PCM/nano-composite W.G. Alshaer a, S.A. Nada, *, M.A. Rady, Elena Palomo Del Barrio, Alain Sommier 2015 International
62 Thermal Management of Electronic Servers under Different Power Conditions. International Journal of Emerging Trends in Electrical and Electronics (IJETEE – ISSN: 2320-9569) Vol. 11, Issue. 4, Aug 2015. S.A. Nada, K. E. Elfeky, Ali M.A. Attia, W.G. Alshaer 2015 International
63 Thermal performance modeling of turbulent flow in multi tube in tube helically coiled heat exchangers A. Fouda, S.A. Nada, H.F. Elattar, H.A. Refaey, Abdullah S. Bin-Mahfouz 2018 International
64 Thermal performance modeling of turbulent flow in multi tube in tube helically coiled heat exchangers A. Fouda, S.A. Nada, H.F. Elattar, H.A. Refaey, Abdullah S. Bin-Mahfouz 2018 International
65 W.G. Alshaer, E. Palomo del Barrio, M. A. Rady, O.E. Abdellatif, S.A. Nada “Analysis of the Anomalous Thermal Properties of Phase Change Materials Based on Paraffin Wax and Multi Walls Carbon Nanotubes ’’, International journal on heat and mass transfer –Theory and Applications, Vol. 1, No. 5, October 2013, PP. 297-307 W.G. Alshaer, E. Palomo del Barrio, M. A. Rady, O.E. Abdellatif, S.A. Nada 2013 Local
Ahmed EL-Sayed Ibrahim EL-Seesy
Local Publication (0)
International Publication (4)
Total (4)
# Publication Authors Year Localization
1 EFFECTS OF ALUMINA NANOPARTICLES ADDITIVES INTO JOJOBA METHYL ESTER-DIESEL MIXTURE ON DIESEL ENGINE PERFORMANCE Ahmed I. El-Seesy, Ali M.A. Attia, Hesham M. El-Batsh, & Mohamed S. Shehata 2014 International
2 Effects of graphene nanoplatelet addition to jatropha BiodieseleDiesel mixture on the performance and emission characteristics of a diesel engine Ahmed I. El-Seesy, Hamdy Hassan, S. Ookawara 2018 International
3 Influence of adding aluminum oxide nanoparticles to diesterol blends on the combustion and exhaust emission characteristics of a diesel engine Mohamed Nour, Ahmed I. EL-Seesy, Ali K. Abdel-Rahman, Mahmoud Bady 2018 International
4 Performance, combustion, and emission characteristics of a diesel engine fueled by biodiesel-diesel mixtures with multi-walled carbon nanotubes additives. Ahmed I. El-Seesy, Ali K. Abdel-Rahman, Mahmoud Bady, S. Ookawara. 2017 International
Hussein Fouad Mohamed Ali
Local Publication (2)
International Publication (24)
Total (26)
# Publication Authors Year Localization
1 "Estimation of Landmine Characteristics in Sandy Desert using Neural Networks", Journal of Neural Computing and Applications, Springer, (2016). DOI: 10.1007/s00521-015-2153-z Hussein F.M. Ali, Ahmed M. R. Fath El Bab, Zakarya Zyada, and Said M. Megahed 2016 International
2 "Egypt Landmine Problem: History, Facts, Constraints and Demining Techniques",8th International Conference of Production Engineering Design and Development, Ain Shams Univ., Egypt, (2010). Said M. Megahed, Hussein F. M. Ali and Ahmed H. Hussein 2010 International
3 "Inclination Angle Effect on Landmine Detection Estimation in Sandy Desert using Neural Networks", The 10th Asian Control Conference, ASCC 2015, (2015). DOI: 10.1109/ASCC.2015.7244615 Hussein F.M. Ali, Zakarya Zyada, Ahmed M. R. Fath El Bab, and Said M. Megahed 2015 International
4 "Novel Contact Sensor Concept and Prototype Based on 2-DOF Vibration Absorber System", Intelligent Systems, Modelling and Simulation, IEEE 7th International Conference, ISMS 2016 (2016). DOI:10.1109/ISMS.2016.70 Hussein F.M. Ali, Ahmed M. R. Fath El Bab, Zakarya Zyada, and Said M. Megahed 2016 International
5 Comparative Study of Extended and Unscented Kalman Filters for Estimating Motion States of An Autonomous Vehicle-Trailer System Hussein F. M. Ali; Nader A. Mansour; Youngshik Kim 2020 Local
6 Design of A 2 DOF Shape Memory Alloy Actuator Using SMA Springs Hussein F. M. Ali, Youngshik Kim 2021 International
7 Design procedure and control of a small-scale knee exoskeleton using shape memory alloy springs Hussein F. M. Ali, and Youngshik Kim 2023 International
8 Development of six-wheeled small mobile robot platform and slip ratio estimation Sewoong Oh, Hussein F. M. Ali, Soojin Kim, Youngshik Kim 2021 International
9 Evaluating the Performance of Neural Network and Kalman Filter Based Linear Model on Classification of Hand EMG Signals Abdullah A.; M. Magdy; A. El-Assal; A. El-Betar; Hussein F. M. Ali 2019 International
10 Finger-Like Mechanism Using Bending Shape Memory Alloys Hussein F. M. Ali; Hangyeol Baek; Taesoo Jang; Youngshik Kim 2020 International
11 Linear System Identification and Control of a Small-Scale Hip Exoskeleton Using Shape Memory Alloy Springs in Hexagonal Architecture. Hussein F. M. Ali, Youngshik Kim, and Shuaiby Mohamed. 2023 International
12 Longitudinal Tire Force Estimation of a Robotic Vehicle with Articulated Suspension: An Experimental Model-Based Approach with Localization Using Two GPS Modules. Hussein F. M. Ali, Yurak Lim, and Youngshik Kim 2024 International
13 M.Sc. Thesis: "Requirements and Design Constraints of a Demining Robot Prototype with its Kinematic Modeling, Simulation and Experimentation" Hussein Fouad Mohamed Ali 2011 International
14 Modeling And Control of A Finger-Like Mechanism Using Bending Shape Memory Alloys Hussein F. M. Ali; Abdul Manan Khan; Hangyeol Baek; Bu Hyun Shin; Youngshik Kim 2021 International
15 Modeling and Control of Two DOF Shape Memory Alloy Actuators with Applications Hussein F. M. Ali, Youngshik Kim, Quang Hoan Le, and Bu Hyun Shin 2022 International
16 Neural Networks Based Road-Tire Friction Coefficient Estimation Using Fiala Tire Model and Kalman Filter Hussein F. M. Ali, and Youngshik Kim 2023 International
17 Novel Artificial Muscle using Shape Memory Alloy Spring Bundles in Honeycomb Architecture in Bi-directions Hussein F. M. Ali, and Youngshik Kim 2022 International
18 Novel Bio-Inspired Artificial Muscle Using Shape Memory Alloy Wire in Spiral Winding Hussein F. M. Ali, and Youngshik Kim 2023 International
19 Novel design and fabrication of a linear actuator based on shape memory alloy wire winding in hexagonal architecture Hussein F. M. Ali and Youngshik Kim 2023 Local
20 PhD Thesis: “Novel Contact Sensor for Landmine Detection” Hussein Fouad Mohamed Ali 2016 International
21 SMA-based caterpillar robot using antagonistic actuation Hangyeol Baek, Nader A. Mansour, Abdul Manan Khan, Vishwanath Bijalwan, Hussein F. M. Ali, and Youngshik Kim 2023 International
22 State Estimation and Experimental Verification of a Robotic Vehicle With Six In-Wheel Drives Using Kalman Filter Hussein F. M. Ali; Se-Woong Oh; Youngshik Kim 2021 International
23 State Estimation Of A Robotic Vehicle With Six In-Wheel Drives Using Kalman Filter Hussein F. M. Ali; Se-Woong Oh; Youngshik Kim 2020 International
24 “Egypt Landmine Problem: History, Facts, Difficulties and Clearance Efforts”, International Symposium: Humanitarian Demining 2010, Šibenik, Croatia, 27 – 29 April (2010). Said M. Megahed, Hussein F. M. Ali and Ahmed H. Hussein 2010 International
25 “Parameter Optimization of a Novel Contact Sensor Based on Frequency Response of 2-DOF Vibration Absorber System for Landmine Detection”, IEEE-IRIS2016, Japan (2016). Hussein F.M. Ali, Ahmed M. R. Fath El Bab, Zakarya Zyada, and Said M. Megahed 2016 International
26 “Remotely Operated Robots with Application to Landmines Removal in Egypt”, 43rd International Symposium. on Robotics (ISR2012), Taipei, Taiwan, Aug. 29-31, (2012). Said M. Megahed, Hussein F. M. Ali 2012 International
Ibrahim Sabry Ibrahim Mahmoud
Local Publication (9)
International Publication (78)
Total (87)
# Publication Authors Year Localization
1 A Comparative Study of Using MCDM Methods Integrated with Entropy Weight Method for Evaluating Facility Location Problem El-Araby, A., Sabry, I., & El-Assal, A. 2022 International
2 A New Approach of Aluminum Oxide ‎Addition for Friction Stir Welding A.M.El-Kassas, Ibrahim Sabry, 2017 International
3 An appraisal of characteristic mechanical properties and microstructure of friction stir welding for Aluminium 6061 alloy – Silicon Carbide (SiCp) metal matrix composite. Ibrahim Sabry, El-Kassas AM. 2019 International
4 An Implementation of Six-Sigma ‎in Aluminum Pipe Welding, Ibrahim Sabry, Ahmed. M. El-Kassas and M. El-Wakil 2017 International
5 Analysis of welded joints using friction stir welding, metal inert gas and tungsten inert gas, Ibrahim Sabry and A.M. Khourshid 2016 International
6 Comparative Study on Different Tool ‎Geometrics in Friction Stirred Aluminum Welds Using Response Surface Methodology, A.M.El-Kassas, Ibrahim Sabry, 2021 Local
7 Cost estimation of Pipe Friction Stir Welding A.M.El-Kassas, Ibraheem Sabry 2017 International
8 Dry and Underwater Friction Stir Welding of AA6061 Pipes - A Comparative Study Ibrahim Sabry and N. Zaafarani 2021 International
9 Effect of Changing Heat Treatment Conditions on Microstructural and Mechanical Properties of Friction Stir Welded Sheets of AA2024 with Interlayer Strip Width AA7075 Mohamed Abu-Okail, Ibrahim Sabry ,Ahmed Abu-Oqail .W. M. Shewakh 2021 International
10 Friction Stir Welding of T-Joints: Experimental and Statistical ‎Analysis Ibrahim Sabry, Ahmed M. El-Kassas, Abdel-Hamid I. Moura Dinu Thomas Thekkuden ‎and Jaber Abu Qudeiri, 2019 International
11 Investigation of microstructure and mechanical characteristic of underwater friction stir welding for Aluminum 6061 alloy – Silicon carbide (SiC) metal matrix composite Ibrahim Sabry 2021 International
12 Investigation of the mechanical properties of Friction Stir Welded 6061 Al plates A.M. Khourshid, A.A. Moustafa,Ibrahim Sabry 2012 Local
13 mechanical properties of friction stir welded aluminum alloy Ibrahim Sabry, Ahmed. M. El-Kassas, A.M. Khourshid and H. M. Hindawy 2017 International
14 Optimization of the Underwater Friction Stir Welding of Pipes Using Hybrid RSM-Fuzzy Approach Ahmed M. El-Kassas, Ibrahim Sabry, 2019 International
15 Optimization of Tungsten Inert Gas Welding Parameters using Grey Relational Analysis for joining AA 6082 Pipes I. Sabry, D. Thomas Thekkuden, A. -H. I. Mourad and S. Husain Khan 2022 International
16 The Joint ‎Properties for Friction Stir Welding of Aluminum Pipes Ibrahim Sabry, Ahmed. M. El-Kassas, A.M. Khourshid and H. M. Hindawy 2017 International
17 Vibration-Assisted friction stir welding of AA2024-T3 plates, Ibrahim Sabry Abdel-Hamid Ismail Mourad and Dinu Thomas Thekkuden 2021 International
18 4. Ibrahim Sabry Amir Hussain Idrisi, Abdel-Hamid Ismail Mourad, Friction stir welding process parameters optimization through hybrid multi-criteria decision-making approach, International Review on Modelling and Simulations (IREMOS), 14(1) 32-43,2021 Ibrahim Sabry Amir Hussain Idrisi, Abdel-Hamid Ismail Mourad 2021 International
19 A comparative study of multiple-criteria decision-making methods for selecting the best process parameters for friction stir welded Al 6061 alloy Ibrahim Sabry,Abdel-Hamid Ismail Mourad, Mohammad Alkhedher, Mohammad Reza Chalak Qazani & Ahmed El-Araby 2024 International
20 A comparative study of multiple-criteria decision-making methods for selecting the best process parameters for friction stir welded Al 6061 alloy Ibrahim Sabry,Abdel-Hamid Ismail Mourad, Mohammad Alkhedher, Mohammad Reza Chalak Qazani & Ahmed El-Araby 2024 International
21 A Comparison between FSW, MIG and TIG ‎Based on Total Cost Estimation for Aluminum Pipes A.M.El-Kassas, Ibraheem Sabry, 2017 Local
22 A Fuzzy Preference Structure for the Selection of Municipal Waste Facility Location I. Sabry, D. T. Thekkuden, A. -H. I. Mourad and A. M. El-Kassas 2022 International
23 A New Quality Monitoring System for Friction ‎Stir Welded Joints of Aluminum Pipes A.M.El-Kassas, Ibrahim Sabry, 2019 International
24 Analysis and Design of Friction Stir Welding A.M. Khourshid, Ibrahim Sabry 2021 International
25 Analysis of variance and Grey relational analysis application Methods for the Selection and Optimization Problem in 6061-T6 flange Friction Stir Welding Process Parameters Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Ahmed Hewidy 2024 International
26 Analysis of variance and Grey relational analysis application Methods for the Selection and Optimization Problem in 6061-T6 flange Friction Stir Welding Process Parameters Ibrahim Sabry, A.M. Hewidy, Mohammad Alkhedher, Abdel-Hamid Ismail Mourad 2024 International
27 Application of Six Sigma in Improving Welding Quality Ibrahim Sabry, AM El-Wardany, M Raafatand and YM Elattar 2022 International
28 Application of Six Sigma in Improving Welding Quality Ibrahim Sabry, AM El-Wardany, M Raafatand and YM Elattar 2022 International
29 Application of six-sigma in aluminum pipe welding Ibrahim Sabry, Ahmed. M. El-Kassas and M. El-Wakil, 2018 International
30 Characteristics of Potential Sources - Vertical Force, Torque and Curent on Pénétration ‎depth for Quality Assessment in Friction Stir Welding of AA 6061 Pipes Ahmed M. El-Kassas, Ibrahim Sabry, Abdel-Hamid I. Mourad, Dinu Thomas Thekkuden, 2019 International
31 Comparison of Mechanical Characteristics of Conventional and Underwater Friction Stir Welding of AA 6063 Pipe Joints Ibrahim Sabry, Abdel-Hamid I. Mourad, Dinu Thomas Thekkuden 2020 International
32 Comparison of RSM and ‎RA with ANN in Predicting Mechanical Properties of Friction Stir Welded Aluminum Alloy ‎Pipes, Ibrahim Sabry, Ahmed. M. El-Kassas and A.M. Khourshid 2017 International
33 Development of Mathematical Model to Predict the Mechanical Properties of Friction Stir ‎Welded Aluminum Pipe, Ibrahim Sabry, Ahmed. M. El-Kassas, A.M. Khourshid and H. M. Hindawy 2017 International
34 Effect of Rotational Speed and Penetration Depth on Al-Mg-Si Welded T-Joints through Underwater and Conventional Friction Stir Welding Ibrahim Sabry, Virendra Pratap Singh, Mohammad Alkhedher, Noah E. El-Zathry, Abdel-Hamid I. Mourad, Majid Naseri 2024 International
35 Exercising hybrid statistical tools GA-ANN and GA-ANFIS to optimize underwater friction stir welding process parameters for tensile strength improvement, Ibrahim Sabry 2021 Local
36 Experimental and Statistical Analysis of Possibility Sources – Rotation Speed, Clamping Torque and Clamping Pith for Quality Assessment in Friction Stir Welding 1. Ibrahim Sabry 2021 International
37 Experimental investigation on joining process of (plate to pipe) aluminum alloy 6082-T6 using friction stir welding Ibrahim Sabry, N. E. El–Zathry and A. M. Hewidy 2022 International
38 Exploring the effect of friction stir welding parameters on the strength of AA2024 and A356-T6 aluminum alloys Ibrahim Sabry 2024 International
39 Extended EDAS and VIKOR Method for Fuzzy Multi-criteria Decision-making: An Application to underwater Friction Stir Welding Ibrahim Sabry 2021 International
40 Extended hybrid statistical tools ANFIS- GA to optimize underwater friction stir welding process parameters for ultimate tensile strength amelioration Ibrahim Sabry, N. E. El-Zathry, F. T. El-Bahrawy Given and M. Abdel Ghaffar, " 2021 International
41 Flange Joining Using Friction Stir Welding and Tungsten Inert Gas Welding of AA6082: A Comparison Based on Joint Performance Ibrahim Sabry, Virendra Pratap Singh, Abdel-Hamid Ismail Mourad, Ahmed Hewidy 2024 International
42 Flange Joining Using Friction Stir Welding and Tungsten Inert Gas Welding of AA6082: A Comparison Based on Joint Performance and Economic Aspects, Ibrahim Sabry, Virendra Pratap Singh, Abdel-Hamid Ismail Mourad, Ahmed Hewidy 2024 International
43 Forecasting COVID-19 Cases in Egypt, Using ARIMA-Based Time-Series Analysis Ibrahim Sabry Amir Hussain Idrisi, Abdel-Hamid Ismail Mourad and M.Elwakil 2021 International
44 Friction Stir welding Study of Aluminum Pipe, A.M. Khourshid, Ibrahim Sabry 2013 International
45 Identification of defective compressor using acoustic signals I. Sabry, D. T. Thekkuden, A. -H. I. Mourad and A. M. El-Kassas, 2022 International
46 IMPACT OF TOOL WEAR ON THE UTMOST TEMPERATURE DURING THE FRICTION STIR WELDING Ibrahim Sabry, A.M. Hewidy 2024 International
47 Impact of tool wear on the utmost temperature during the friction stir welding Ibrahim Sabry, A.M. Hewidy 2023 International
48 Implementation of hybrid RSM-GA optimization techniques in underwater friction stir welding Ibrahim Sabry, N E El-Zathry, N Gadallah and M Abdel Ghafaar 2022 International
49 Improvement of Mathematical Model to ‎Predict the Mechanical Properties and Corrosion rate of Friction Stir Welded 2024 ‎Aluminum Alloy Ibrahim Sabry, Eatemad H.S. and Rehab I. A., 2021 Local
50 Integration between Artificial Neural ‎Network and Responses Surface Methodology for Modeling of Friction Stir Welding, Ibrahim Sabry, Ahmed. M. El-Kassas and A.M. Khourshid 2015 International
51 Investigation of microstructure and mechanical characteristics of underwater friction stir welding for Aluminum 6061 alloy – Silicon carbide (SiC) metal matrix composite. Ibrahim Sabry 2021 International
52 Mechanical and tribological behaviours of friction stir welding using various strengthening techniques Ibrahim Sabry, Mostafa S.S. El-Deeb, A.M. Hewidy, Mohamed ElWakil 2024 International
53 mechanical and tribological characteristics of stir casting Al2O3-SiC-Gr/Al6063 hybrid composite Ibrahim Sabry, & A.M. Hewidy 2024 International
54 mechanical and tribological characteristics of stir casting Al2O3-SiC-Gr/Al6063 hybrid composite Ibrahim Sabry, & A.M. Hewidy, 2024 International
55 Mechanical Characteristic of Al 6063 Pipe Joined by Underwater Friction Stir Welding Ibrahim Sabry, N. Gad Allah, Mohamed A. Nour, M. Abdel Ghafaar 2021 International
56 Multi-Criteria Decision Making Approaches for Facilities Planning Problem A. M. El-Araby, Ibrahim Sabry and A. El-Assal 2021 International
57 Multi-criteria decision-making methods comparative analysis in Fuzzy Environment: Article review Khaled R. Hindi, Ahmed El-Assal, Ibrahim Sabry 2022 International
58 Multi-objective Optimization on Surface Roughness of 3D-Printed Parts by Fused Deposition Modelling . El-Attar, I. Sabry and A. El-Assal, 2022 International
59 Multi-weld Quality Optimization of Friction Stir Welding for Aluminium Flange Using the Grey-based Taguchi Method Ibrahim Sabry, Ahmed Hewidy, Mohamed ElWakil 2024 International
60 Multi-Weld Quality Optimization of Gas Tungsten Arc Welding for Aluminium 6061 using the Grey Relation Analysis-Based Taguchi Method Ibrahim Sabry, & A.M. Hewidy 2024 International
61 Multi-Weld Quality Optimization of Gas Tungsten Arc Welding for Aluminium 6061 using the Grey Relation Analysis-Based Taguchi Method Ibrahim Sabry, & A.M. Hewidy 2024 International
62 Optimization of friction stir welding AA6082-T6 parameters using analysis of variance and grey relational analysis N E El-Zathry, A I Hassan, A A El-Betar and Ibrahim Sabry 2022 International
63 Optimization of friction stir welding parameters using response surface methodology Ibrahim Sabry, N Gadallah and M Abu-Okail, 2021 International
64 optimization of Friction Stir Welding ‎Parameters for Jining Aluminum Pipes using Regression Analysis Ibrahim Sabry, Ahmed. M. El-Kassas and A.M. Khourshid, 2016 International
65 Optimization of Fused Deposition Modelling Acrylonitrile-co-Butadiene-co-Styrene Parameters using ANOVA and Hybrid GRA–TOPSIS Ibrahim Sabry, T.El-Attar, , & A. M. Hewidy 2024 International
66 Optimization of metal inert gas welded aluminium 6061 pipe parameters using analysis of variance and grey relational analysis Ibrahim Sabry, Abdel-Hamid I. Moura ‎and Dinu Thomas Thekkuden, 2021 Local
67 Optimization of parameters and formulation of numerical model employing GRA-TOPSIS based on Taguchi method for friction stir welded 6063-T3 alloy Ibrahim Sabry, Ahmed Hewidy 2024 International
68 Optimization of parameters and formulation of numerical model employing GRA-TOPSIS based on Taguchi method for friction stir welded 6063-T3 alloy Ibrahim Sabry, Ahmed Hewidy 2024 International
69 Optimization of process parameters of metal inert gas welding process on aluminum alloy 6063 pipes using Taguchi-TOPSIS approach Ibrahim Sabry, A.M. Hewidy, Majid Naseri, Abdel-Hamid I. Mourad 2024 International
70 Optimization of process parameters of metal inert gas welding process on aluminum alloy 6063 pipes using Taguchi-TOPSIS approach Ibrahim Sabry, A.M. Hewidy, Majid Naseri, Abdel-Hamid I. Mourad 2024 International
71 Optimization of Process Parameters to Maximize Ultimate Tensile Strength and Hardness of Underwater Friction Stir Welded Aluminium Alloys using Fuzzy Logic I brahim Sabry, Nabil Gadallah, M Abdel Ghafaar and MM Abdel-Mottaleb 2020 International
72 Ranking Performance of MARCOS Method for Location Selection Problem in the Presence of Conflicting Criteria Ahmed El-Araby, Ibrahim Sabry, & Ahmed El-Assal 2024 International
73 Self-Cleaning Behavior Of 3D-Printed Textile Materials With Different Printing Parameters Was Experimentally Investigated Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Heba Atef Abd El-Aziz and A.M Hewidy 2024 International
74 Six sigma methodology using to improve the mechanical properties for Friction Stir Welding of Aluminum pipes Ibrahim Sabry 2020 International
75 Statistical Analysis of Corrosion Rate and ‎Mechanical Properties of metal inert gas welding Ibrahim Sabry, Ahmed. M. El-Kassas, 2018 International
76 Stir casted SiC Gr/Al6061 hybrid composite tribological and mechanical properties, Ibrahim Sabry, M. Abdel Ghafaar, Abdel-Hamid I. Moura ‎and Amir Hussain Idrisi, 2020 International
77 Summarized Review on Friction Stir Welding for Aluminum Alloys, Ibrahim Sabry and M.Abdel Ghafaar Nabil Gadallah, A 2021 International
78 Summarized Review on Friction Stir Welding for Aluminum Alloys, Ibrahim Sabry and M.Abdel Ghafaar Nabil Gadallah, A 2021 Local
79 TOPSIS – GRA Approach to Optimize Friction Stir Welded Aluminum 6061 Pipes Parameters I. Sabry, D. T. Thekkuden and A. -H. I. Mourad, 2022 International
80 Total Error Analysis Role of Predicting ‎Mechanical Properties by Friction Stir Welded Aluminum pipes A.M.El-Kassas, Ibraheem Sabry 2017 International
81 Underwater friction-stir welding of a stir-cast AA6061-SiC metal matrix composite: optimization of the process parameters, microstructural characterization, and mechanical properties Ibrahim Sabry, A.M. Hewidy 2022 International
82 Using hybrid ANN-GA to refine parameters of the underwater friction stir welding process ‎parameters for tensile strength enhancement Ibrahim Sabry N Gad Allah., and Mohamed A. Nour, M. Abdel Ghafaar, 2021 Local
83 Using Multi Criteria Decision Making in Optimizing ‎the Friction Stir Welding Process of Pipes: A Tool Pin Diameter Ahmed M. El-Kassas, Ibrahim Sabry, 2019 International
84 Using Six Sigma Methodology to Improve Friction Stir Welding of Aluminum Pipes Ibrahim Sabry, Ahmed. M. El-Kassas 2018 International
85 Variants of friction stir welding for joining AA 6063 pipes I. Sabry, D. T. Thekkuden, A. -H. I. Mourad and K. Abdullah, 2022 International
86 Wear resistance of glass and carbon fibers/epoxy composites I. Sabry, A. -H. I. Mourad, A. Subhan, and A. H. Idrisi, 2022 International
87 Welding of Cylindrical Parts by Using Friction ‎Stir Technique, Journal of Engineering Research, A.M. Khourshid, T. Bousaif, and Ibrahim Sabry, 2013 Local
Mohamed Nour
Local Publication (0)
International Publication (32)
Total (32)
# Publication Authors Year Localization
1 Adding n-butanol, n-heptanol, and n-octanol to improve vaporization, combustion, and emission characteristics of diesel/used frying oil biodiesel blends in DICI engine Mohamed Nour; Ahmed I Elseesy; Ali Attia; Xuesong Li; Sameh Nada 2021 International
2 Combustion and Emission Characteristics of a Diesel Engine Working With Diesel/Jojoba Biodiesel/Higher Alcohol Blends Ahmed I. EL-Seesy; Mohamed Nour; Tiemin Xuan; Zhixia He; Hamdy Hassan 2020 International
3 Combustion and emission characteristics of DI diesel engine fuelled by ethanol injected into the exhaust manifold M Nour; H Kosaka; S Sato; M Bady; Ali Kamel 2017 International
4 Combustion and emissions of isomeric butanol/gasoline surrogates blends on an optical GDI engine Dong Han; Yunchu Fan; Zhe Sun; Mohamed Nour; Xuesong Li 2020 International
5 Combustion, performance and emission analysis of diesel engine fuelled by higher alcohols (butanol, octanol and heptanol)/diesel blends Mohamed Nour; Ali M.A.Attia; Sameh A. Nada 2019 International
6 Diesel-oxygenated fuels ternary blends with nano additives in compression ignition engine: A step towards cleaner combustion and green environment Ahmed I.EL-eesy; Mohamed Nour; Hamdy Hassan; Ashraf Elfasakhany; Zhixia He ; M.A.Mujtaba 2021 International
7 Differences in pool-fire induced soot production between subcooled spray and flash boiling spray in a DISI engine Zhe Sun; Mingli Cui; Mohamed Nour; Xuesong Li David Hung Min Xu 2021 International
8 Effect of flash boiling injection on combustion and PN emissions of DISI optical engine fueled with butanol isomers/TPRF blends Mohamed Nour; Zhe Sun; Mingli Cui; Shangze Yang; David Hung; XuesongLi ; Min Xu 2020 International
9 Effect of Split Injection Timing on Combustion and Emissions of a DISI Optical Engine Under Lean Burn Condition Zhe Sun; Mingli Cui; Hongyu Wang; Mohamed Nour; Xuesong Li; Min Xu; David Hung 2020 International
10 Effect of Water Injection into Exhaust Manifold on Diesel Engine Combustion and Emissions Mohamed Nour; Hidenori kosaka; Ali Kamel Abdel-Rahman; Mahmoud Bady 2016 International
11 Effects of intake and exhaust manifold water injection on combustion and emission characteristics of a DI diesel engine Mohamed Farag; H Kosaka; M Bady; Ali Kamel 2017 International
12 Experimental evaluation of the performance and emissions of a direct-injection compression-ignition engine fueled with n-hexanol–diesel blends Mohamed Nour; Zhe Sun; Ahmed I.El-Seesy; Xuesong Li 2021 International
13 EXPERIMENTAL INVESTIGATION OF PERFORMANCE AND EXHAUST EMISSIONS OF A GAS TURBINE ENGINE FUELED WITH WASTE COOKING OIL Mohamed Noureldin, Ali K. Abdel-Rahman, Mahmoud bady, S. OOkawara 2015 International
14 Experimental Study on Performance and Emissions of Turbojet Engine Fueled by Alternative Biodiesel Mohamed Noureldin Ibrahim, Ahmed Hamza H Ali, S Ookawara 2017 International
15 Experimental study on the combustion performance of a stationary CIDI engine fueled with 1-heptanol-diesel mixtures Mohamed Nour; S.A. Nada; Xuesong Li 2022 International
16 Flash boiling combustion of isomeric butanol and gasoline surrogate blends using constant volume spray chamber and GDI optical engine Xuesong Li; Zhe Sun; Shangze Yang; Hongyu Wang; Mohamed Nour 2021 International
17 Impact of flash boiling multiple injections timing on the combustion and thermal efficiency of a gasoline direct injection engine under lean-burn Zhe Sun; Qinglin Xu; Mingli Cui; Mohamed Nour; Xuesong Li; David L.S.Hung; Min Xu 2021 International
18 Improvement of CI engine combustion and performance running on ternary blends of higher alcohol (Pentanol and Octanol)/hydrous ethanol/diesel Mohamed Nour; Ali M.A.Attia; Sameh A.Nada 2019 International
19 Influence of adding aluminum oxide nanoparticles to diesterol blends on the combustion and exhaust emission characteristics of a diesel engine Mohamed Nour; Ahmed I.EL-Seesy; Ali K.Abdel-Rahman; Mahmoud Bady 2018 International
20 Investigation of Flash Boiling Spray and Combustion in SIDI Engine under Low-Speed Homogeneous Lean Operation Zhe Sun; Xuesong Li; Mohamed Nour; Min Xu 2021 International
21 Investigation the effect of adding graphene oxide into diesel/higher alcohols blends on a diesel engine performance Ahmed I. El-Seesy; Mohamed Nour; Ali M. A. Attia; Zhixia He ; Hamdy Hassan 2020 International
22 Investigations on the Optimal Ignition Strategy of Internal Combustion Engines via Various Spark Discharge Conditions Ye Chang, Haotian Xu, Zhe Sun, Mohamed Nour, Xuesong Li, and Min Xu 2020 International
23 Kinetics and physical analyses for pyrolyzed Egyptian agricultural and woody biomasses: effect of microwave drying Mahmoud Amer; Mohamed Nour ; Mahmoud Ahmed; Ibrahim El-Sharkawy; Shinichi Ookawara; Sameh Nada; Ahmed Elwardany 2020 International
24 Performance assessment of turbojet engine operated with alternative biodiesel MN Ibrahim, AHH Ali, S Ookawara 2013 International
25 Pyrolysis, kinetics, and structural analyses of agricultural residues in Egypt: For future assessment of their energy potential Mohamed Nour; Mahmoud Amer; Ahmed Elwardany; Ali Attia; Sameh Nada; Xuesong Li 2021 International
26 Significant Impact of Flash Boiling Spray on In-Cylinder Soot Formation and Oxidation Process Zhe Sun ; Shangze Yang; Mohamed Nour; Xuesong Li*; David Hung ; Min Xu 2020 International
27 Spray cyclic variations of multicomponent fuels under subcooled, transitional, and superheated conditions Mohamed Nour; David Hung; Xuesong Li; Min Xu 2022 International
28 Study of Egyptian castor biodiesel-diesel fuel properties and diesel engine performance for a wide range of blending ratios and operating conditions for the sake of the optimal blending ratio Ali M.A.Attia; Mohamed Nour; Sameh A.Nada 2018 International
29 Study of flash boiling combustion with different fuel injection timings in an optical engine using digital image processing diagnostics Zhe Sun; Mingli Cui; Mohamed Nour; Xuesong Li; David Hung; Min Xu 2021 International
30 The effect of castor oil methyl ester blending ratio on the environmental and the combustion characteristics of diesel engine under standard testing conditions Ali M.A.Attia; Mohamed Nour ; Ahmed I. El-Seesy; Sameh A. Nada 2020 International
31 The effect of microwave drying pretreatment on dry torrefaction of agricultural biomasses Mahmoud Amer; Mohamed Nour; Mahmoud Ahmed; Shinichi Ookawara; Sameh Nada ; Ahmed Elwardany 2019 International
32 The influence of castor biodiesel blending ratio on engine performance including the determined diesel particulate matters composition ttia Ali MA; A. R. Kulchitskiy; Mohamed Nour; Ahmed I. El-Seesy; Sameh A. Nada. 2022 International
Mohamed Ramadan Gomaa Behiri
Local Publication (0)
International Publication (13)
Total (13)
# Publication Authors Year Localization
1 A novel merging Tubular Daylight Device with Solar Water Heater–Experimental study Mohamed M Marmoush, Hegazy Rezk, Nabila Shehata, Jean Henry, Mohamed R Gomaa 2018 International
2 A novel statistical performance evaluation of most modern optimization-based global MPPT techniques for partially shaded PV system Hegazy Rezka, Mazen AL-Oran, Mohamed R. Gomaa, Mohamed A. Tolba, Ahmed Fathy, Mohammad Ali Abdelkareemh, A.G. Olabih, Abou Hashema M. El-Sayed 2019 International
3 An Experimental Implementation and Testing of a Concentrated Hybrid Photovoltaic/Thermal System with Monocrystalline Solar Cells Using Linear Fresnel Reflected Mirrors Mohamed R. Gomaa, Ramadan J. Mustafa, Hegazy Rezk 2019 International
4 ANALYSIS OF PROPERTIES OF LINEAR FOCUS FRESNEL REFLECTING CONCENTRATOR Mohamed R. Gomaa, R. Vardanyan, V. Dallakyan 2011 International
5 Energy Performance Analysis of On-Grid Solar Photovoltaic System- a Practical Case Study Mohamed R. Gomaa, Mohamed A. Mohamed, Hegazy Rezk, Mohammed J. Al shammri 2019 International
6 Enhancement of Energy Saving and CO2 Emissions Reducing through PV Systems M. R. Behiri, W. Abdelaziz, Hesham El-Batsh, Hegazy Rezk 2016 International
7 Evaluating the Environmental Impacts and Energy Performance of a Wind Farm System Utilizing the Life-Cycle Assessment Method: A Practical Case Study 39. Mohamed R. Gomaa, Hegazy Rezk, Ramadan J. Mustafa, Mujahed Al-Dhaifallah 2019 International
8 Flow Behavior in an Asymmetric Plane Diffuser With Fully Developed and Wake Velocity Profiles at Inlet Magdy A. Bassily Hanna*, A. M. EL-Kersh**, Ramadan Bassiouny*, Mohamed R. Gomaa* 2007 International
9 Hybrid moth-flame optimization algorithm and incremental conductance for tracking maximum power of solar PV/thermoelectric system under different conditions Hegazy Rezk, Ziad M. Ali, Omer Abdalla, Obai Younis, Mohamed R. Gomaa, Mauia Hashim 2020 International
10 SIMULATION OF LINEAR MIRROR REFLECTOR FOR SOLAR CONCENTRATOR SYSTEM Mohamed R. Gomaa1, R. Vardanyan2 2011 International
11 Sizing Methodology of a Multi-Mirror Solar Concentrated Hybrid PV/Thermal System Mohamed R. Gomaa, Ramadan J. Mustafa, Hegazy Rezk, Mujahed Al-Dhaifallah, A. Al-Salaymeh 2018 International
12 Solar photovoltaic and thermal hybrid systems Mohamed R. Gomaa, Norsoyan A.A., Vardanyan R. 2010 International
13 THERMAL PERFORMANCE OF A LINEAR FRESNEL REFLECTOR SOLAR CONCENTRATOR PV/T ENERGY SYSTEMS Mohamed R. Gomaa 2011 International
Nader Abdelwahab Ahmed Mansour
Local Publication (3)
International Publication (14)
Total (17)
# Publication Authors Year Localization
1 A novel SMA-based micro tactile display device for elasticity range of human soft tissues: Design and simulation Nader A. Mansour; Ahmed M. R. Fath El-Bab; Samy F. M. Assal 2015 International
2 ANFIS-Based System Identification and Control of a Compliant Shape Memory Alloy (SMA) Rotating Actuator Nader A. Mansour; Hangyeol Baek; Taesoo Jang; Buhyun Shin; Youngshik Kim 2020 International
3 Bidirectional rotating actuators using shape memory alloy wires Youngshik Kim; Taesoo Jang; Hema Gurung; Nade A. Mansour; Bongju Ryu; Buhyun Shin 2019 International
4 Comparative study of extended and unscented Kalman filters for estimating motion states of an autonomous vehicle trailer system Hussein F. M. Ali, Nader A. Mansour, Youngshik Kim 2021 International
5 Compliant closed-chain rolling robot using modular unidirectional SMA actuators Nader A. Mansour; Taesoo Jang; Hangyeol Baek; Buhyun Shin; Bongju Ryu; Youngshik Kim 2020 International
6 Design and Analysis of Experiments in ANFIS Modeling of a 3-DOF Planner Manipulator Muhammed Gaafar; Ahmed Maged; Mahmoud M. Magdy; Nader A. Mansour; Ahmed El-Betar 2018 International
7 Design of A Novel Multi-modal Tactile Display Device for Biomedical Applications Nader A. Mansour; Ahmed M. R. Fath El-Bab 2012 International
8 Design Procedure and Simulation of a Novel Multi-Modal Tactile Display Device for Biomedical Applications Nader A. Mansour; Ahmed M. R. Fath El-Bab; Mohamed Abdellatif 2014 International
9 Design, characterization and control of SMA springs-based multi-modal tactile display device for biomedical applications Nader A. Mansour; Ahmed M. R. Fath El-Bab; Samy F. M. Assal; Osamu Tabata 2015 International
10 Development of a New Long Stroke Nanopositioning System With Modular Pantograph Compliant Mechanism Yasser Sayed Shama; Mahmoud Magdy; Nader A. Mansour; Ahmed El-Betar; Ahmed M. El-Assal 2022 Local
11 Development of a New Long Stroke Nanopositioning System With Modular Pantograph Compliant Mechanism Yasser Sayed Shama; Mahmoud Magdy; Nader A. Mansour; Ahmed El-Betar; Ahmed M. El-Assal 2019 International
12 Development of a Novel Miniaturized Electromagnetic Actuator for a Modular Serial Manipulator Nader A. Mansour, Buhyun Shin, Bongjo Ryu, Youngshik Kim 2021 International
13 Evaluation of Ride Performance through a Comparative Study of Switchable Damper and Active Suspension by Using Fuzzy and Linear Quadratic Regulator Controller’s Strategies A. Soliman, M. Galal, and Nader A. Mansour 2021 International
14 Human Motion Spectrum-based 2-DOF Energy Harvesting Device: Design Methodology and Experimental Validation Mahmoud M. Magdy; Nader A. Mansour; Ahmed M. R. Fath El-Bab; Samy Assal 2014 International
15 Modeling and Control Analysis of an Arc-Shaped Sma Actuator Using Pid, Sliding and Integral Sliding Mode Controllers Khan, Abdul Manan and Kim, Youngshik and Shin, Buhyun and Mansour, Nader A. and Moghadam, Mahyar Hasanzadeh 2022 Local
16 Modeling of Novel Arc Shaped SMA Actuator Abdul-Manan Khan, Nader Mansour, Youngshik Kim, Buhyun Shin, Bongjo Ryu 2021 International
17 Shape Characterization of A Multi-Modal Tactile Display Device for Biomedical Applications Nader A. Mansour; Ahmed M. R. Fath El-Bab; Mohamed Abdellatif 2012 Local
Radwan Metwaly Abd Elatif Elzoheiry
Local Publication (0)
International Publication (5)
Total (5)
# Publication Authors Year Localization
1 AN INVESTIGATION OF A NOVEL STRUCTURE POLYCRYSTALLINE SILICON SOLAR CELL FOR CONCENTRATED SOLAR POWER Ali Radwan, Mohamed Emam, Radwan M. Elzoheiry, Mahmoud Ahmed 2017 International
2 COMBUSTION CHARACTERISTICS OF JOJOBA METHYL ESTER AS AN ALTERNATIVE FUEL FOR GAS TURBINE Ali M.A. Attia; Radwan M. El-Zoheiry; Hesham M. El-Batsh; Mohamed S. Shehata 2014 International
3 Efficient fuel utilization by enhancing the under-rib mass transport using new serpentine flow field designs of direct methanol fuel cells Radwan M. El-Zoheiry , Shinichi Ookawara , Mahmoud Ahmed 2017 International
4 Performance Study of Bio-inspired Flow Field design for Direct Methanol Fuel Cells Radwan M. El-Zoheiry, Mahmoud Ahmed, Shinichi Ookawara, F. B. Baz 2017 International
5 Using multi-path spiral flow fields to enhance under-rib mass transport in direct methanol fuel cells Radwan M. El-Zoheiry , Shinsuke Mori , Mahmoud Ahmed 2018 International
Salah Haridy
Local Publication (4)
International Publication (36)
Total (40)
# Publication Authors Year Localization
1 A Single X Chart Outperforming the Joint &R and &S Charts for Monitoring Mean and Variance. 2016 International
2 An Optimization Design of the Combined Shewhart-EWMA Control Chart. 2016 International
3 A Combined Synthetic & np Scheme for Detecting Increases in Fraction Nonconforming Haridy S., Wu Z., Khoo M. B. C. and Yu F. J. 2012 International
4 A Multiattribute Cumulative Sum-np Chart Chong N. L., Khoo M. B. C., Haridy S., Shamsuzzaman M. 2019 International
5 An Application of Fractional Factorial Design in Wire Electrochemical Turning Process El-Taweel T. A. and Haridy S. 2014 International
6 An Attribute Chart for Monitoring the Process Mean and Variance Haridy S., Wu Z., Lee C. K. and Rahim M. A. 2014 International
7 An Educational Scheme for a CNC Drilling Machine Haridy S., Wu Z. and Shafik A. 2012 International
8 An Improved Design of Exponentially Weighted Moving Average Scheme for Monitoring Attributes Haridy S., Shamsuzzaman M., Alsyouf I., Mukherjee A 2020 International
9 An Incipient On-Line Anomaly Detection Approach for the Dynamic Rolling Process Ou Y., Hu J., Li X. and Haridy S. 2014 International
10 An Integrated Framework of Statistical Process Control and Design of Experiments for Optimizing Wire Electrochemical Turning Process Haridy S., Gouda S. A. and Wu Z. 2011 International
11 An Optimization Design of the 3-EWMA Scheme for Monitoring Mean Shifts Shamsuzzaman M., Khoo M. B. C., Haridy S. and Alsyouf I. 2014 International
12 An Optimization Design of the Combined np-CUSUM Scheme for Attributes Haridy S., Wu Z., Yu F. J. and Shamsuzzaman M. 2013 International
13 Binomial CUSUM Chart with Curtailment Haridy S., Wu Z., Chen S. and Knoth S. 2014 International
14 Chi-squared Control Chart for Multiple Attributes Haridy S., Wu Z. and Flaig J. 2012 International
15 Continuous Improvement of Injection Molding using Six Sigma: Case Study. 2019 International
16 Design and Application of Dual-EWMA Scheme for Anomaly Detection in Injection Moulding Process Shamsuzzaman M., Haridy S., Maged A., Alsyouf I. 2019 International
17 Design of Economic Chart for Monitoring Electric Power Loss Through Transmission and Distribution System. 2019 International
18 Design of Economic X-bar Chart for Monitoring Electric Power Loss Through Transmission and Distribution System Shamsuzzaman M., Haridy S., Alsyouf I., Rahim M. A. 2020 International
19 Development of a Multiattribute Synthetic-np Chart Haridy S., Wu Z., Abhary K., Castagliola P. and Shamsuzzaman M. 2015 International
20 Early detection of adverse conditions in deep excavations using statistical process control Al Suwaidi, D., Haridy, S., Al Zaylaie, M. et al. 2021 Local
21 Effect of Sample Size on the Performance of Shewhart Control Charts. 2019 International
22 Effective monitoring of carbon emissions from industrial sector using statistical process control Mohammad Shamsuzzaman, Ahm Shamsuzzoha, Ahmed Maged, Salah Haridy, Hamdi Bashir, Azharul Karim 2021 International
23 EWMA Chart with Curtailment for Monitoring Fraction Nonconforming. 2017 International
24 Grooves into Cylindrical Shapes by Wire Electrochemical Machining. 2019 International
25 Modeling and Analyzing Critical Success Factors for Implementing Environmentally Sustainable Practices in a Public Utilities Organization: A Case Study Albastaki F., Bashir H., Ojiako U., Shamsuzzaman M., Haridy S. 2021 International
26 Monitoring Scheme for Early Detection of Coronavirus and Other Respiratory Virus Outbreaks Haridy S., Maged A., Baker A., Shamsuzzaman M., Bashir H., Alsyouf I., Xie M. 2021 International
27 On Preventive Maintenance Policies: A Selection Framework Alsyouf I., Hamdan S., Shamsuzzaman M., Haridy S., Alawaysheh I. 2020 International
28 Optimal Average Sample Number of the SPRT Chart for Monitoring Fraction Nonconformin Haridy S., Wu Z., Lee C. K. and Bhuiyan N. 2013 International
29 Optimization design of control charts: A systematic review S Haridy, A Maged, N Alherimi, M Shamsuzzaman, S Al‐Ali 2024 International
30 Performance of Statistical Process Control Methods for Regional Surgical Site Infection Surveillance: A 10-Year Multi-Center Pilot Study. 2018 International
31 Quality process control and resourcing in manufacturing firms Salah Haridy, Udechukwu Ojiako, Ahmed Maged, Mezoon Al Remeithi, Hamdi Bashir & Mohammad Shamsuzzaman 2023 Local
32 Requirements, Challenges, and Impacts of Lean Six Sigma Applications: A Narrative Synthesis of Qualitative Research Alblooshi M., Shamsuzzaman M., Khoo M. B. C., Rahim M. A., Haridy S. 2020 Local
33 Shewhart-EWMA chart for monitoring binomial data subject to shifts of random amounts Salah Haridy, James C Benneyan 2024 International
34 Side-sensitive group runs double sampling (SSGRDS) chart for detecting mean shifts Khoo M. B. C., Tan E. K., Chong Z. L., Haridy S. 2015 International
35 Statistical Monitoring and Optimization of Electrochemical Machining using Shewhart Charts and Response Surface Methodology. Ahmed Maged, Salah Haridy, Mohammad Shamsuzzaman, Imad Alsyouf and Roubi Zaied 2018 International
36 Synergistic Effect of Graphene and Carbon Nanotube on Lap Shear Strength and Electrical Conductivity of Epoxy Adhesives Han S., Meng Q., Pan X., Liu T., Zhang S., Wang Y., Haridy S., Araby S. 2019 International
37 The relationship between leadership styles and organisational innovation : A systematic literature review and narrative synthesis Mohamed Alblooshi, Mohammad Shamsuzzaman, Salah Haridy 2021 Local
38 The Relationship Between Leadership Styles and Organizational Innovation: A Systematic Literature Review and Narrative Synthesis. Alblooshi M., Shamsuzzaman M., Haridy S. 2020 International
39 Univariate and Multivariate Approaches for Evaluating the Capability of Dynamic-Behavior Processes (Case Study) Haridy S., Wu Z. and Castagliola P. 2011 International
40 Univariate and Multivariate Control Charts for Monitoring Dynamic-Behavior Processes: a Case Study Haridy S. and Wu Z. 2009 International
Sherif Araby Gouda
Local Publication (0)
International Publication (18)
Total (18)
# Publication Authors Year Localization
1 A comparative study on mechanical and rheological properties of ternary rubber blends Amir A Abdelsalam, Sherif Araby, Salwa H El-Sabbagh, Ahmed Abdelmoneim, Mohsen A Hassan 2020 International
2 Development of flame-retarding elastomeric composites with high mechanical performance Sherif Araby, Chun-Hui Wang, Hao Wu, Qingshi Meng, Hsu-Chiang Kuan, Nam Kyeun Kim, Adrian Mouritz, Jun Ma 2018 International
3 Development of flame-retarding elastomeric composites with high mechanical performance Sherif Araby, Chun-Hui Wang, Hao Wu, Qingshi Meng, Hsu-Chiang Kuan, Nam Kyeun Kim, Adrian Mouritz, Jun Ma 2018 International
4 Elastomer nanocomposites containing MXene for mechanical robustness and electrical and thermal conductivity Mathias Aakyiir, Sherif Araby, Andrew Michelmore, Qingshi Meng, Yousef Amer, Yu Yao, Min Li, Xiaohui Wu, Liqun Zhang, Jun Ma 2020 International
5 Electrically and thermally conductive elastomer by using MXene nanosheets with interface modification Mathias Aakyiir, Huimin Yu, Sherif Araby, Wang Ruoyu, Andrew Michelmore, Qingshi Meng, Dusan Losic, Namita Roy Choudhury, Jun Ma 2020 International
6 Epoxy/graphene film for lifecycle self-sensing and multifunctional applications Sensen Han, Qingshi Meng, Ke Xing, Sherif Araby, Yin Yu, Adrian Mouritz, Jun Ma 2020 International
7 Filling natural microtubules with triphenyl phosphate for flame-retarding polymer composites Hao Wu, Sherif Araby, Jian Xu, Hsu-Chiang Kuan, Chun-Hui Wang, Adrian Mouritz, Yan Zhuge, Richard J-T Lin, Tony Zong, Jun Ma 2018 International
8 Graphene for flame-retarding elastomeric composite foams having strong interface Sherif Araby, Jihui Li, Ge Shi, Zheng Ma, Jun Ma 2017 International
9 Graphene Platelets and Their Polymer Composites: Fabrication, Structure, Properties, and Applications Ge Shi, Sherif Araby, Christopher T Gibson, Qingshi Meng, Shenmin Zhu, Jun Ma 2018 International
10 Graphene Platelets versus phosphorus compounds for elastomeric composites: flame retardancy, mechanical performance and mechanisms SHERIF ARABY, Xiao Su, Qingshi Meng, Chun Hui Wang, Hsu Kuan, Adrian P Mouritz, Ahmed Maged, Jun Ma 2019 International
11 High-mass loading electrodes with exceptional areal capacitance and cycling performance through a hierarchical network of MnO2 nanoflakes and conducting polymer gel Zhaokun Yang, Jun Ma, Sherif Araby, Dongjian Shi, Weifu Dong, Ting Tang, Mingqing Chen 2019 International
12 Investigation on graphene addition on the quasi-static and dynamic responses of carbon fibre-reinforced metal laminates Shuo Wang, Meng Cao, Hongqian Xue, Sherif Araby, Fethi Abbassi, Yanli He, Weiguo Su, Qingshi Meng 2022 International
13 Mechanical and electrical properties of graphene and carbon nanotube reinforced epoxy adhesives: Experimental and numerical analysis Mechanical and electrical properties of graphene and carbon nanotube reinforced epoxy adhesives: Experimental and numerical analysis Sensen Han, Qingshi Meng, Sherif Araby, Tianqing Liu, Murat Demiral 2020 International
14 Mechanical, toughness and thermal properties of 2D material- reinforced epoxy composites Sensen Han, Qingshi Meng, Zhe Qiu, Amr Osman, Rui Cai, Yin Yu, Tianqing Liu, Sherif Araby 2019 International
15 Mechanically robust, electrically and thermally conductive graphene-based epoxy adhesives Qingshi Meng, Sensen Han, Sherif Araby, Yu Zhao, Zhiwen Liu, Shaowei Lu 2019 International
16 Multifunctional, flexible and mechanically resilient porous polyurea/graphene composite film Xu Cui, Chunyan Zhang, Sherif Araby, Rui Cai, Gulnur Kalimuldina, Zhaokun Yang, Qingshi Meng 2022 International
17 Novel approach to improve crumb rubber concrete strength using thermal treatment El-Sayed Abd-Elaal, Sherif Araby, Julie E Mills, Osama Youssf, Rajeev Roychand, Xing Ma, Yan Zhuge, Rebecca J Gravina 2020 International
18 Thermoelectric generator based on anisotropic wood aerogel for low-grade heat energy harvesting Xuan Zhao, Zehong Chen, Hao Zhuo, Yijie Hu, Ge Shi, Bing Wang, Haihong Lai, Sherif Araby, Wenjia Han, Xinwen Peng, Linxin Zhong 2022 International
Waleed Gaber Ibrahim Alshaer
Local Publication (0)
International Publication (12)
Total (12)
# Publication Authors Year Localization
1 Analysis of the anomalous thermal properties of phase change materials based on paraffin wax and multi walls carbon nanotubes W. G. Alshaer, E. Palomo del Barrio, M. A. Rady, O. E. Abdellatif , S. A. Nada 2013 International
2 Characterization of different sugar alcohols as phase change materials for thermal energy storage applications E. Palomo del Barrioa, A. Godinb,⁎, M. Duquesnec, J. Daranlotd, J. Jollyd, W. Alshaere, T. Kouadiob, A. Sommierb 2017 International
3 Comprehensive parametric study of using carbon foam structures saturated with PCMs in thermal management of electronic systems S.A. Nada ; W.G. Alshaer 2015 International
4 Comprehensive parametric study of using carbon foam structures saturated with PCMs in thermal management of electronic systems S.A.Nada; W.G.Alshaer 2015 International
5 Experimental investigation of thermal conductivity enhancement of carbon foam saturated with PCM and PCM/MWCNTs composite for energy storage systems S.A. Nada; W. G. Alshaer; K. E. Elfeky 2019 International
6 Experimental parametric study of servers cooling management in data centers buildings S. A. Nada; K. E. Elfeky; Ali M. A. Attia ; W. G. Alshaer 2017 International
7 HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF MULTI TUBES IN TUBE HELICALLY COILED HEAT EXCHANGER S. A. Nada, W. G. Alshaer and A. S. Huzayyin 2014 International
8 Numerical investigations of using carbon foam/PCM/Nano carbon tubes composites in thermal management of electronic equipment W.G. Alshaer, S.A. Nada a, M.A. Rady, Cedric Le Bot, Elena Palomo Del Barrio 2014 International
9 Performance of multi tubes in tube helically coiled as a compact heat exchanger S. A. Nada; W. G. El Shaer; A. S. Huzayyin 2014 International
10 Thermal characteristics and energy saving of charging/discharging processes of PCM in air free cooling with minimal temperature differences S.A.Nada; W.G.Alshaer; R.M.Saleh 2020 International
11 Thermal management of electronic devices using carbon foam and PCM/nano-composite W.G. Alshaer , S.A. Nada, M.A. Rady, Elena Palomo Del Barrio, Alain Sommier 2014 International
12 Thermal Management of Electronic Servers under Different Power Conditions S.A. Nada; K. E. Elfeky; Ali M.A. Attia; W.G. Alshaer 2015 International
Abd Elrahman Nabawy Ahmed Elgendy
Local Publication (0)
International Publication (7)
Total (7)
# Publication Authors Year Localization
1 A Parallel distributed genetic algorithm using Apache Spark for flexible scheduling of multitasks in a cloud manufacturing environment Abdelrahman Elgendy, Jihong Yan, Mingyang Zhang 2024 International
2 Developing a genetic-based multi-objective algorithm to optimise job shop scheduling problems Mohammed Hussein and Abd_Elrahman Elgendy 2018 International
3 Integrated Strategies to an Improved Genetic Algorithm for Allocating and Scheduling Multi-Task in Cloud Manufacturing Environment Mingyang Zhang. Abdelrahman Elgendy, JihongYan 2019 International
4 Optimizing Dynamic Flexible Job Shop Scheduling Problem Based on Genetic Algorithm Abd Elrahman Elgendy, Mohammed Hussein, Abdelmoty Elhakeem 2017 International
5 RESEARCH ON CLOUD MANUFACTURING ORIENTED MACHINE TASK SCHEDULING FRAMEWORK AND METHOD Abdelrahman Elgendy 2023 International
6 Study and Evaluation of Job Shop Dynamic Scheduling Approaches Abdelrahman Elgendy 2017 International
7 Towards sustainable production and logistics: Exploring the impact of integrating multi-transportation means on the efficiency of scheduling of diverse tasks in cloud manufacturing Abdelrahman Elgendy, Jihong Yan 2023 International
Abdalla M. A. Ahmed
Local Publication (0)
International Publication (14)
Total (14)
# Publication Authors Year Localization
1 A comprehensive review on the thermal, electrical, and mechanical properties of graphene-based multi-functional epoxy composites Amr Osman; Abdelmoty Elhakeem; Saleh Kaytbay; Abdalla Ahmed* 2022 International
2 A Practical Methodology for Modeling and Verification of Self-Healing Microcapsules-Based Composites Elasticity Abdalla Ahmed, Kazuaki Sanada, Mohamed Fanni, Ahmed Abd El-Moneim 2018 International
3 Continuum-Micromechanical Modeling of Microcapsules-Based Composites Abdalla Ahmed, Kazuaki Sanada, Mohamed Fanni, Ahmed Abd El-Moneim 2017 International
4 Effect of Growth Temperature on Vertically-Aligned Carbon Nanotubes Prepared by Radio-Frequency Plasma-Enhanced Chemical Vapor Deposition Abdalla Abdalla, Haitham El-bery, Mohamed Nasr, Y Matsushita, Ahmed Eldesouky, Ahmed Abd El-Moneim 2014 International
5 Effects of graphene, alumina, and their hybrid on dynamic mechanical behavior of epoxy-based nanocomposites Abdalla Ahmed; Amr Osman; Abd El-Moaty El-Hakeem; Saleh Kaytbay 2023 International
6 Evaluation of the viscoelastic behavior, thermal transitions, and self-healing efficiency of microcapsules-based composites with and without a catalyst using dynamic mechanical analysis technique Abdalla Ahmed; Alamry Ali; Bandar Alzahrani; Kazuaki Sanada; 2023 International
7 Exploring the Correlation Between the Orientation and Stacking Sequence of Raster Layers with the Mechanical Properties, Weight, and Cost in FDM-3D Printed PLA Parts Abdalla Ahmed 2024 International
8 Influence of Different Nano-Structured Fillers on the Performance of Epoxy Nanocomposites Amr Osman, Abdelmoty Elhakeem, Saleh Kaytbay, Abdalla Ahmed 2020 International
9 Investigating the influence of self-healing microcapsule volume fraction on the dynamic mechanical properties and self-healing performance of epoxy-based composites Abdalla Ahmed; Alamry Ali; Bandar Alzahrani; Kazuaki Sanada; 2024 International
10 Micromechanical Modeling and Experimental Verification of Self-Healing Microcapsules-Based Composites Abdalla Ahmed, Kazuaki Sanada 2019 International
11 Modeling Mechanical Behavior of Open-Hole Plain-Woven Composite Laminates under Tensile Loading Abdalla Ahmed 2015 International
12 Modeling Thermoelastoplasticity of Composite Materials Abdalla Ahmed, Yasser Shabana 2015 International
13 Modelling Stress Concentration Effects in Unidirectional Glass Fibre-Reinforced Polymer Composites Abdalla Abdalla, Ahmed Abd El-Moneim, Mohamed Nasr 2014 International
14 Thermal, Electrical and Mechanical Properties of Graphene/Nano-Alumina/Epoxy Composites Amr Osman, Abdelmoty Elhakeem, Saleh Kaytbay, Abdalla Ahmed 2021 International
Abdelgalil Abdelgalil Mohamed Youssef Eltayesh
Local Publication (0)
International Publication (4)
Total (4)
# Publication Authors Year Localization
1 Effect of Secondary Flows on Heat Transfer of a Gas Turbine Blade Hesham M. El-Batsh, Sameh A. Nada, Samia Nasreldin Abdo, and Abdelgalil A. El-Tayesh 2013 International
2 Effect of Wind Tunnel Blockage on the Performance of a Horizontal AxisWind Turbine with Different Blade Number A Eltayesh, M Bassily Hanna, F Castellani, A.S Huzayyin, H M El-Batsh, M Burlando, M Becchetti 2019 International
3 Experimental and numerical study of the wind tunnel blockage effects on the behaviour of a horizontal axis wind turbine Abdelgalil Eltayesh, Massimiliano Burlanod, Francesco Castellani and Matteo Becchetti 2018 International
4 THREE DIMENSIONAL HEAT TRANSFER CHARACTERISTICS THROUGH A LINEAR GAS TURBINE CASCADE H. M. El-Batsh *, S. A. Nada, S. N. Abdo, A. Mohamed 2012 International
Ahmad Elsaid Eladawi Mohamad
Local Publication (2)
International Publication (2)
Total (4)
# Publication Authors Year Localization
1 Statistical Investigation of Maintenance Effects on Quality of Formed Glass Tube Dimensions, Defect and Diffusion Forum Vol. 362 (2015) pp 108-114 © (2015) Trans Tech Publications, Switzerland Ahmad E. Eladawi, Hammad T. Elmetwally, R. A. Ibrahim 2015 International
2 TRIBOLOGICAL PERFORMANCE OF POLYMER COMPOSITES REINFORCED BY AGRICULTURAL WASTES, EGTRIB Journal JOURNAL OF THE EGYPTIAN SOCIETY OF TRIBOLOGY VOLUME 10, NO. 2, APRIL 2013, pp. 36 - 45 ISSN 2090 - 5882 Ibrahim R. A., Abdel-Barr M. M., Eladawi A. E. 2013 International
3 “Application of computer vision for prediction of cutting conditions in milling operations”, Journal of Engineering Manufacture, I MECH E Part B, Vol. 223. Eladawi A.E., Gadelmawla E.S., Abouelatta O.B., and Elewa I.M. 2008 Local
4 “Investigation of the cutting conditions in milling operations image texture features”, Journal of Engineering Manufacture, I MECH E Part B, Vol. 222 pp 1395-1404. Eladawi A.E., Gadelmawla E.S., Abouelatta O.B., and Elewa I.M. 2008 Local
Ahmed Antar Mahmoud Hawash
Local Publication (1)
International Publication (20)
Total (21)
# Publication Authors Year Localization
1 3D investigation on the impact of chips positions and number on their cooling inside cavity Hamdy Hassan, NY Abdel Shafey, Ziya Uddin, AA Hawwash 2021 International
2 A parametric study on the impact of integrating solar cell panel at building envelope on its power, energy consumption, comfort conditions, and CO2 emissions Rania Elghamry, Hamdy Hassan, AA Hawwash 2020 International
3 An experimental investigation on the performance of designed closed reactor system on the thermochemical heat storage of magnesium chloride hexahydrate A.A. Hawwasha, Shinsuke Mori, Hamdy Hassan 2024 International
4 Assessment of a sustainable multigeneration system integrating supercritical CO2 Brayton cycle and LNG regasification: Thermodynamic and exergoeconomic evaluation Mohamed S. Yousef, , A.A. Hawwash, Domingo Santana 2024 International
5 Boosting the thermal management performance of a PCM-based module using novel metallic pin fin geometries: Numerical study Abdelrahman M. Elshaer, A. M. A. Soliman, M. Kassab, A. A. Hawwash 2023 International
6 Enhancing solar still performance with hybrid nanofluid: a comprehensive assessment of energy, exergy, economics, and environmental impact using a novel fractional model EF El-Gazar, Mohamed S Yousef, Abdelrahman M Elshaer, Mahmoud A Khattab, TA Mouneer, AA Hawwash 2024 International
7 Experimental and numerical investigations of an open-cell copper foam (OCCF)/phase change material (PCM) composite-based module for satellite avionics thermal management in a thermal vacuum chamber (TVC) Abdelrahman M. Elshaer a b , A.M.A. Soliman c , M. Kassab b , A.A. Hawwash 2024 International
8 Experimental investigations on copper foam/PCM composite-based thermal control hardware (TCH) using foam samples with different pore sizes under intermittent thermal conditions Abdelrahman M. Elshaer a b , A.M.A. Soliman c , M. Kassab b , Shinsuke Mori d , A.A. Hawwash 2023 International
9 Experimental study about the impact of open cell aluminium foam (OCAF) insertion in salt-based phase change material (PCM) for electronics thermal management Abdelrahman M. Elshaer a , A.M.A. Soliman b , Mohamed S. Yousef c , M. Kassab d , A.A. Hawwash 2024 International
10 Experimental Study of Alumina Nanofluids Effects on Thermal Performance Efficiency of Flat Plate Solar Collectors A A Hawwash · Ali K Abdel-Rahman · S Ookawara · S A Nada 2016 International
11 Heat energy storage module for thermal management of small satellites in low earth orbit thermal conditions Abdelrahman M Elshaer, AMA Soliman, M Kassab, AA Hawwash 2022 International
12 Impact of reactor design on the thermal energy storage of thermochemical materials AA Hawwash, Hamdy Hassan 2019 International
13 Long-term thermal energy storage using thermochemical materials AA Hawwash, Hamdy Hassan, Mahmoud Ahmed, S Ookawara 2017 International
14 Numerical Investigation of Temperature distribution analysis for a domestic refrigerator with different duct shapes Faisal Elhabashy, A.A. Hawwash, Aly M.A. Soliman, Walid G. Alshaer 2024 Local
15 Numerical study about thermal performance evaluation of PCM and PCM/fins composite-based thermal control module at microgravity conditions Abdelrahman M. Elshaer a b , A.M.A. Soliman c , M. Kassab c , Shinsuke Mori d , A.A. Hawwash 2023 International
16 Numerical Study for Open Reactor Design Using Salt Hydrate AA Hawwash, Shinsuke Mori, Khalid El Feky, Hamdy Hassan 2019 International
17 Numerical Study for Open Reactor Design Using Salt Hydrate AA Hawwash, Shinsuke Mori, Khalid El Feky, Hamdy Hassan 2019 International
18 Thermal Analysis of Flat Plate Solar Collector Using Different Nanofluids and Nanoparticles Percentages AA Hawwash, Maqusood Ahamed, SA Nada, Ali Radwan, Ali K Abdel-Rahman 2021 International
19 Thermal control of a small satellite in low earth orbit using phase change materials-based thermal energy storage panel Abdelrahman M. Elshaer a b , A.M.A. Soliman c , M. Kassab b , Shinsuke Mori d , A.A. Hawwash 2023 International
20 Thermal performance enhancement of a PCM-based heat sink for thermal control of small satellites in the space environment: a numerical study A. A. HAWWASH Abdelrahman M. ELSHAER, A. M. A. SOLIMAN, M. KASSAB 2022 International
21 Thermodynamic analysis for novel vapor compression/absorption cascade refrigeration system for LNG liquefaction processes in Egypt TA Mouneer, AA Hawwash, MH Aly, EM Mina 2022 International
Ahmed Maged Mohamed
Local Publication (0)
International Publication (4)
Total (4)
# Publication Authors Year Localization
1 A facile approach to fabricate elastomer/graphene platelets nanocomposites Sherif Araby, Ahmed Maged, Izzuddin Zaman, Jun Ma, Peter Majewski 2014 International
2 Continuous improvement of injection molding using Six Sigma: case study Ahmed Maged, Salah Haridy, Saleh Kaytbay, Nadia Bhuiyan 2018 International
3 Graphene platelets versus phosphorus compounds for elastomeric composites: flame retardancy, mechanical performance and mechanisms Sherif Araby, Xiao Su, Qingshi Meng, Hsu-Chiang Kuan, Chun-Hui Wang, Adrian Mouritz, Ahmed Maged and Jun Ma 2019 International
4 Statistical Monitoring and Optimization of Electrochemical Machining using Shewhart Charts and Response Surface Methodology Ahmed Maged, Salah Haridy, Mohammad Shamsuzzaman, Imad Alsyouf, Roubi Zaied 2018 International
Ahmed Mahmoud Shaaban Hwedi
Local Publication (0)
International Publication (0)
Total (0)
Ahmed Said Fahem Elazab
Local Publication (0)
International Publication (0)
Total (0)
Alaaeldien elsaied shafek dawoud
Local Publication (0)
International Publication (2)
Total (2)
# Publication Authors Year Localization
1 Experimental Evaluation of Diesel Engine Performance and emission using blends of jojoba oil and Diesel fuel Huzayyin A. S., Bawady A. H., Rady M. A., and Dawood A. 2004 International
2 Performance and emission characteristics of Diesel engine using blends of jojoba oil and jojoba methyl ester with gas oil Huzayyin A. S., Bawady A. H., Rady M. A., and Dawood A. 2004 International
Amir Aziz Moustafa Emam Abdelsalam
Local Publication (0)
International Publication (5)
Total (5)
# Publication Authors Year Localization
1 A comparative study on mechanical and rheological properties of ternary rubber blends Amir A. Abdelsalam; Sherif Araby; Salwa H. El-Sabbagh; Ahmed Abdelmoneim; Mohsen A. Hassan 2019 International
2 A study of microstructures characteristics of A356-Al2O3 composites produced by cooling slope and conventional stir cast Amir A. Abdelsalam, T. S. Mahmoud,Ahmed El-Betar, Ahmed El-Assal 2015 International
3 Constitutive modelling of elastomer/graphene platelet nanocomposites Amir A. Abdelsalam, Sherif Araby, M. A. Hassan, A. A. El-Moneim 2017 International
4 Effect of carbon black loading on mechanical and rheological properties of natural rubber/styrene-butadiene rubber/nitrile butadiene rubber blends Amir A. Abdelsalam; Sherif Araby; Salwa H. El-Sabbagh; Ahmed Abdelmoneim; Mohsen A. Hassan 2019 International
5 Effect of silane coupling agent on the physico-mechanical properties of EPDM/SBR/AL2O3 rubber blend nanocomposites Amir A. Abdelsalam, W.S. Mohamed, Gamal Abd El-Naeem and Salwa H. El-Sabbagh 2022 International
Ashraf Ibrahim Hassan Khalil
Local Publication (1)
International Publication (31)
Total (32)
# Publication Authors Year Localization
1 On a New Dynamic Material removal Mechanism for Abrasive Waterjet Machining (AWJM) Ashraf I. Hassan, Jan Kosmol 2000 International
2 A Finite Element Model for Abrasive Waterjet Machining Hassan, A. I., Kosmol, J. 2000 International
3 Finite Element Modeling of Abrasive Waterjet Machining (AWJM) Hassan, A. I., Kosmol, J. 2000 International
4 Investigation of the Length of Segment in Orthogonal Turn-Milling (OTM) Ashraf I. Hassan, Jan Kosmol 2000 International
5 On-line monitoring of depth of cut in AWJ cutting Hassan, A. I., Chen, C., Kovacevic, R. 2004 International
6 Preliminary Attempt to FEM Modelling of AWJM Polymeric Composites J Kosmol, T Wala, and A I Hassan 2001 International
7 Recent Advances in Abrasive Waterjet Machining (AWJM) A I Hassan, J Kosmol 2004 International
8 A finite element model for abrasive waterjet machining (AWJM) Ashraf I Hassan, Jan Kosmol 1999 International
9 A New Approach of Virtual Finite Element Experimentation As A Means For Modeling Advanced Machining Processes Ashraf I Hassan, Jan Kosmol 2001 International
10 A New Model for Abrasive Waterjet Machining Ashraf I Hassan, Jan Kosmol 1998 International
11 A Preliminary Finite Element Model of waterjet Machining (WJM) Ashraf I Hassan, Jan Kosmol 1998 International
12 A user-friendly finite element model for radial mode abrasive waterjet turning Yahya Abdelhameed; Ashraf Ibrahim Hassan; Saleh Kaytbay 2021 International
13 Abrasive Particle Fracture in Abrasive Waterjet Machining Ashraf I Hassan, Jan Kosmol 2000 Local
14 An Experimental Investigation of the Effect of Machining Parameters on Productivity in AWJM Hassan, A. I., Kosmol, J. and Rybarz, M. 2000 International
15 An Overview of Abrasive Waterjet Machining (AWJM) Ashraf I Hassan, Jan Kosmol 1997 International
16 Analysis of Stresses in Abrasive Waterjet Machining (AWJM) Ashraf I Hassan, Jan Kosmol 2000 International
17 Depth of cut prediction in abrasive waterjet turning using a new finite element model Y. Abdelhameed, Ashraf I. Hassan andSaleh Kaytbay 2020 International
18 Development of an Educational Virtual CIM system for AWJM, Hassan, A. I., Kosmol, J 2001 International
19 Dynamic elastic–plastic analysis of 3D deformation in abrasive waterjet machining Hassan, A. I., Kosmol, J. 2001 International
20 Effect of Cutting Parameters on Vertical Force in AWJ Cutting A I Hassan, R Kovacevic 2014 International
21 Finite Element Analysis of Abrasive Water Waterjet Machining Ashraf Ibrahim Hassan 2001 International
22 Finite Element Approach in Turn-milling Process M Y El-Makky, A I Hassan 1994 International
23 Finite Element Modeling of abrasive Waterjet Machining (AWJM) Ashraf I Hassan, Jan Kosmol 2000 International
24 Modeling of Abrasive Waterjet Machining with Finite Element Method Jan Kosmol, Ashraf I Hassan 2000 International
25 Modelowanie obróbki strumieniem wodno-ściernym metodą elementów skończonych Jan Kosmol, Ashraf I Hassan 2000 International
26 Numerical Investigation on the Crater Geometry in Abrasive Water Jet Turning Process Y. Abdelhameed and A. I. Hassan and Saleh Kaytbay 2019 International
27 Obróbka kompozytów polimerowych cienkim strumieniem wody J Bursa, J Kosmol, A I Hassan 2001 International
28 Obróbka polimerów i kompozytów polimerowych metodami wysokoenergetycznymi J Bursa, J Kosmol, A I Hassan 1998 International
29 Optimization of friction stir welding AA6082-T6 parameters using analysis of variance and grey relational analysis N E El-Zathry, A I Hassan, A A El-Betar, and I Sabry 2022 International
30 Recent advances in machining of polymeric composite materials by AWJM Ashraf I. HASSAN, Jan KOSMOL, Jerzy BURSA 1998 International
31 SEM Observations of Micro Erosion in Ductile Materials at Normal Impact in AWJM Ashraf I. Hassan, Jan Kosmol 2001 International
32 Simulation of abrasive waterjet machining (AWJM) Ashraf I Hassan, Jan Kosmol 1999 International
Hussein Hamdy Hussein Shehata
Local Publication (0)
International Publication (9)
Total (9)
# Publication Authors Year Localization
1 Adaptive Mobile Robot Path Planning Based Algorithm for Dynamic Environments Hussein Shehata; Josef Schlattmann 2012 International
2 Artificial Neuro-Petri Net and its Application to the Design of a Controller for a Discrete Event Flexible Manufacturing System Hussein Shehata; A. El-Betar; M. Abdelhameed; F. Tolbah 2004 International
3 Dynamic Petri Net Based Discrete Event Controller H. Shehata; A. El-Betar; M. Abdelhameed; F. Tolbah 2003 International
4 Mobile Robot Obstacle Avoidance Based on Neural Networks with a Standardization Technique Karoline K. Farag, Hussein H. Shehata, and Hesham M. El-Batsh. 2021 International
5 Mobile robot path planning and obstacle avoidance based on a virtual obstacle concept Hussein Shehata; Josef Schlattmann 2011 International
6 Non-Dominated Sorting Genetic Algorithm For Smooth Path Planning In Unknown Environments Hussein Shehata; Josef Schlattmann 2014 International
7 Potential Field Multi-Objective Optimization For Robot Path Planning Using Genetic Algorithm Hussein Shehata; Josef Schlattmann 2014 International
8 Reactive Algorithm for Mobile Robot Path Planning Among Moving Target/Obstacles by Means of Dynamic Virtual Obstacle Concept Hussein Shehata; Josef Schlattmann 2012 International
9 Virtual Obstacle Parameter Optimization For Mobile Robot Path Planning: A Case Study Hussein Shehata; Josef Schlattmann 2016 International
Karem Elsayed Ebaid Abdel Ghany Elfeky
Local Publication (1)
International Publication (23)
Total (24)
# Publication Authors Year Localization
1 Cycle cut-off criterion effect on the performance of cascaded, sensible, combined sensible-latent heat storage tank for concentrating solar power plants Karem Elsayed Elfeky*, Abubakar Gambo Mohammed, Qiuwang Wang 2021 International
2 Effects of servers' rack location and power loading configurations on the thermal management of data center racks' array S. A. Nada,K. E. Elfeky 2017 International
3 Experimental investigations of air conditioning solutions in high power density data centers using a scaled physical model S.A. Nada, K.E. Elfeky, Ali M.A. Attia 2015 International
4 Experimental investigations of thermal managements solutions indata centers buildings for different arrangements of cold aislescontainments S.A. Nadan, K.E. Elfeky 2017 International
5 Experimental parametric study of servers cooling management in data centers buildings S. A. Nada1 · K. E. Elfeky1 · Ali M. A. Attia1 · W. G. Alshaer1 2017 International
6 Experimental study of solving thermal heterogeneity problem of datacenter servers S.A. Nada⇑, Ali M.A. Attia, K.E. Elfeky 2016 International
7 Heat Transfer and Thermal Performance of Large-Format Li-ion Battery Modules Employing PCM with Airgap/Aluminum under Extreme Conditions Abubakar Gambo Mohammed, Karem Elsayed Elfeky, Qiuwang Wang 2020 Local
8 Investigate the Thermal Performance of Thermocline Tank for Hybrid Solar Tower Power Plants Investigate the Thermal Performance of Thermocline Tank for Hybrid Solar Tower Power Plants 2020 International
9 Numerical analysis on performances of shell side in segmental baffles, helical baffles and novel clamping anti-vibration baffles with square twisted tubes shell and tube heat exchangers S.M.A. Naqvi, Karem Elsayed, Yiping Cao, Qiuwang Wang 2019 International
10 Numerical characterization of thermocline behaviour of combined sensiblelatent heat storage tank using brick manganese rod structure impregnated with PCM capsules N. Ahmed, K.E. Elfeky, Mumtaz A. Qaisrani, Q.W. Wang 2022 International
11 Numerical comparison between single PCM and multi-stage PCM based high temperature thermal energy storage for CSP tower plants K.E. Elfeky, N. Ahmed, Qiuwang Wang 2022 International
12 Numerical Investigation of Cycle Cut-off Criterion on System Performance of Thermocline Tank Karem Elsayed Elfeky, Abubakar Gambo Mohammed, Qiuwang Wang 2020 International
13 Numerical investigation of the melting temperature effect on the performance of thermocline thermal energy storage tank for CSP Karem Elsayed Elfeky, Naveed Ahmed, S.M.A. Naqvi, Qiuwang Wang 2019 International
14 Numerical Study on the Performance of Thermocline Tank for Hybrid Solar Tower Power Plants using DEM-CFD Coupled Method Karem Elsayed Elfeky, Abubakar Gambo Mohammed, Qiuwang Wang 2020 International
15 Numerical Study to Investigate the Thickness of the PCM Layer for the Three Layers Tank for the CSP Plants Karem Elsayed Elfeky, Abubakar Gambo Mohammed, Qiuwang Wang 2021 International
16 Optimization of thermal performance in thermocline tank thermal energy storage system with the multilayered PCM(s) for CSP tower plants K.E. Elfeky, Xinyi Li, N. Ahmed, Lin Lu, Qiuwang Wanga 2019 International
17 Performance analysis of an air rock thermocline TES tank for concentrated solar power plants using the coupled DEM–CFD approach Karem Elsayed Elfeky · Abubakar Gambo Mohammed · Qiu wang Wang 2021 International
18 Recent advancement and enhanced battery performance using phase change materials based hybrid battery thermal management for electric vehicles Abubakar Gambo Mohammed, Karem Elsayed Elfeky, Qiuwang Wang * 2021 International
19 Thermal and economic evaluation of phase change material volume fraction for thermocline tank used in concentrating solar power plants K.E. Elfeky, A.G. Mohammed, N. Ahmed, Lin Lu, Qiuwang Wang 2020 International
20 Thermal and economic evaluation of thermocline combined sensible-latent heat thermal energy storage system for medium temperature applications N. Ahmed, K.E. Elfeky, Lin Lu, Q.W. Wang 2019 International
21 Thermal management evaluation of Li-ion battery employing multiple phase change materials integrated thin heat sinks for hybrid electric vehicles Abubakar Gambo Mohammed, Karem Elsayed Elfeky, Qiuwang Wang 2022 International
22 Thermal Management of Electronic Servers under Different Power Conditions Sameh Nada,K. E. Elfeky,Ali Attia,W. G. Alshaer 2015 International
23 Thermal performance analysis of thermocline combined sensiblelatent heat storage system using cascaded-layered PCM designs for medium temperature applications N. Ahmed, K.E. Elfeky, Lin Lu, Q.W. Wang 2020 International
24 Thermo-Economic Evaluation of Thermocline Thermal Energy Storage Tank for CSP Plants Karem Elsayed Elfeky, Abubakar Gambo Mohammed, Qiuwang Wang* 2021 International
Magdy Helal
Local Publication (2)
International Publication (15)
Total (17)
# Publication Authors Year Localization
1 A Fuzzy TOPSIS Approach in Multi-Criteria Decision Making for Supplier Selection in a Pharmaceutical Distributor, 2016 IEEE Intl. Conf. on Industrial Engineering and Engineering Management, Dec 4th – 7th, Bali, Indonesia Kaushik Nag, M. Helal 2016 International
2 A methodology for integrating and synchronizing the system dynamics and discrete event simulation paradigms. Proceedings of the Inter. Conf. of the System Dynamics Society, July 29 - Aug 2 2007 Helal, M., Rabelo, L., Sepulveda, J., Jones, A. 2007 International
3 An enterprise simulation approach to the development of dynamic balanced scorecards. 25th ASEM National Conference, Oct 20-23, 2004 Helal, M., Rabelo, L. 2004 International
4 An investigation of the group scheduling heuristics in a flow-line cell. Current Advances in Mechanical Design & Production; 7th Cairo University International MDP Conference, February 12-15, Cairo, Egypt Ahmed Huzzayen, Mirvat Badr, Magdy Helal 2000 International
5 Application of FMEA-FTA in Reliability Centered Maintenance Planning, Intl. Conf. on Applied Mechanics & Mechanical Engineering: AMME-15. May 29-31 2012, Cairo, Egypt Islam Hilali and Magdy Helal 2012 Local
6 Creative solutions for analyzing faculty and administrator salaries. Florida Association for Institutional Research; FAIR Conference, Feb 6-8, Indialantic, FL Helal, M., Archer, S., Armacost, R. 2008 International
7 Detecting and analyzing patterns in supply chain behavior. International journal of simulation and process modeling, (2)3/4: 198-209 Rabelo, L., Helal, M., Dawson, J., Moraga, R. 2006 International
8 Enterprise Scheduling: Hybrid, Feedback, and Hierarchical issues. Winter Simulation Conference ; WSC’10 Dec 5 – 8, Baltimore MD Pastrana, J., Marin, M., Rabelo-Mendizabal, L., Helal, M. 2010 International
9 Enterprise simulation: A hybrid system approach. International Journal of Computer Integrated Manufacturing, (18) 6: 498-508 Rabelo, L., Helal, M., Jones, A., Min, H. 2005 International
10 Investigating Group Scheduling Algorithms in a Flow Line Based Manufacturing Cell Magdy Helal 1999 Local
11 Supply chain and hybrid simulation in the hierarchical enterprise. International Journal of Computer Integrated Manufacturing, (28) 5: 488 – 500 L Rabelo, A Sarmiento, M Helal, A Jones 2015 International
12 Tabu search algorithm for the unrelated parallel machines scheduling problem with setup times. International Journal of Operations Research, (3) 3: 1-11 Helal, M., Rabadi, G., Al-Salem, A. 2006 International
13 Technology solutions to support program of study planning and class scheduling. Southern Association of Intuitional Research Conference; SAIR, Oct 7-9, Little Rock, AR Archer, S., Helal, M., Sehrish, S., Armacost, R. 2007 International
14 Towards a Dynamic Performance Management System for Healthcare in Kuwait, Proceedings of the 2016 Industrial and Systems Engineering Research Conference, 21-25 May, Anaheim, CA, USA Magdy Helal 2016 International
15 Using Computer Simulation in Lean Manufacturing Implementation Intl. Conf. on Applied Mechanics & Mechanical Engineering: AMME-16. May 27-29 2014, Cairo, Egypt Seleem, S. N., Helal, M., Elassal, A. M. 2014 International
16 Using system dynamics, neural nets, and eigenvalues to analyse supply chain behaviour - A case study. International Journal of Production Research, (46) 1: 51 – 71 Rabelo, L., Helal, M., Lertpattarapong, C., Moraga, R., Sarmiento, A. 2008 International
17 Value chain analysis using hybrid simulation and AHP. International Journal of Production Economics, (105): 536-547 Rabelo, L., Eskandari, H., Shaalan, T., Helal, M. 2007 International
mahmoud ahmed mohamed said
Local Publication (0)
International Publication (13)
Total (13)
# Publication Authors Year Localization
1 A study on the Thermal Energy Storage of Different Phase Change Materials incorporated with the Condenser of Air-Conditioning Unit and their Effect on the Unit Performance M.A.Said,Hamdy HASSAN 2019 International
2 An Experimental work on the Effect of Using New Technique of Thermal Energy Storage of Phase Change Material on the Performance of Air Conditioning Unit MA Said; Hamdy HASSAN 2018 International
3 An Experimental work on the Effect of Using New Technique of Thermal Energy Storage of Phase Change Material on the Performance of Air Conditioning Unit M.A.Said,HamdyHassan 2018 International
4 CFD investigations of data centers’ thermal performance for different configurations of CRACs units and aisles separation SA Nada, MA Said, MA Rady 2016 International
5 Comprehensive study on the effects of plenum depths on air flow and thermal managements in data centers S.A.Nada, M.A.Said 2017 International
6 Effect of CRAC units layout on thermal management of data center SA Nada, MA Said 2017 International
7 Effect of using nanoparticles on the performance of thermal energy storage of phase change material coupled with air-conditioning unit M.A.Said,Hamdy Hassan 2018 International
8 Impact of energy storage of new hybrid system of phase change materials combined with air-conditioner on its heating and cooling performance 2022 International
9 Numerical investigation and parametric study for thermal and energy management enhancements in data centers buildings SA Nada, MA Said, MA Rady 2015 International
10 Numerical Investigation of Cooling of Electronic Servers Racks at Different Locations and Spacing from the Data Center Cooling Unit S.A. Nada, M.A. Rady, M. Elsharnoby, M. A. Said 2015 International
11 Parametric study on the effect of using cold thermal storage energy of phase change material on the performance of air-conditioning unit M.A.Said,Hamdy Hassan 2018 International
12 Performance and energy consumptions of split type air conditioning units for different arrangements of outdoor units in confined building shafts SA Nada, MA Said 2017 International
13 Solutions of thermal performance problems of installing AC outdoor units in buildings light wells using mechanical ventilations SA Nada, MA Said 2017 International
Mahmoud Mohamed Magdy
Local Publication (0)
International Publication (4)
Total (4)
# Publication Authors Year Localization
1 New fully decoupled manipulator with three translational motion for pick and place applications M. Magdy, M. Fanni, A. T. Elgammal, A. M. Mohamed, 2016 International
2 Path Smoothing Algorithm Using Thin-Plate Spline 2021 International
3 PD Type of Fuzzy Controller for a New 3DOF Fully Decoupled Translational Manipulator Manar Lashin, M. Fanni, M. Magdy, A. M. Mohamed. 2016 International
4 Space deformation based path planning for Mobile Robots 2022 International
Mohamed El-Taher Mohamed Salem
Local Publication (1)
International Publication (0)
Total (1)
# Publication Authors Year Localization
1 Design of a pitch angle control system for a horizontal axis small wind turbine Mohamed E. M. Salem 2016 Local
Mohamed Osama Helmy
Local Publication (0)
International Publication (7)
Total (7)
# Publication Authors Year Localization
1 Abrasive Water Jet Machining of Multidirectional CFRP Laminates M El-Hofy, MO Helmy, G Escobar-Palafox, K Kerrigan, R Scaife, H El-Hofy 2018 International
2 Effect of Cutting Fluid Delivery Method on Ultrasonic Assisted Edge Trimming of Multidirectional CFRP Composites at Different Machining Conditions Mohamed O Helmy, MH El-Hofy, Hassan El-Hofy 2018 International
3 Elimination of Clogging in PMMA Microchannels Using Water Assisted CO2 Laser Micromachining Mohamed O. Helmy 2015 International
4 Experimental Investigation of Bouncing-Back of Multidirectional CFRP Laminates during Ultrasonic Assisted Edge Trimming Mohamed O Helmy, MH El-Hofy, Hassan El-Hofy 2018 International
5 Fabrication and characterization of polymethyl methacrylate microchannel using dry and underwater CO2 laser Mohamed O Helmy, Ahmed R Fath El-Bab, Hassan A El-Hofy 2018 International
6 Influence of process parameters on the ultrasonic assisted edge trimming of aerospace CFRP laminates using MQL Mohamed O. Helmy, M.H. El-Hofy, Hassan El-Hofy 2020 International
7 Multi-objective optimization for CO2 laser micromachining of PMMA using Taguchi based grey relational analysis Mohamed O Helmy, Ahmed MR Fath El-Bab, Hassan A El-Hofy 2015 International
Mohamed Samir Youssif Mohamed
Local Publication (2)
International Publication (8)
Total (10)
# Publication Authors Year Localization
1 An experimental study on the performance of single slope solar still integrated with a PCM-based pin-finned heat sink Mohamed S.Yousef, Hamdy Hassan, S.Kodama, H.Sekiguchi 2019 International
2 An experimental work on the performance of single slope solar still incorporated with latent heat storage system in hot climate conditions Mohamed S.Yousef, Hamdy Hassan 2019 International
3 Assessment of different passive solar stills via exergoeconomic, exergoenvironmental, and exergoenviroeconomic approaches: A comparative study Mohamed S.Yousef , Hamdy Hassan 2019 Local
4 Energetic and exergetic performance assessment of the inclusion of phase change materials (PCM) in a solar distillation system Mohamed S.Yousef, Hamdy Hassan 2019 International
5 Energy and exergy analysis of single slope passive solar still under Egyptian climate conditions Mohamed S.Yousef, Hamdy Hassan, Mahmoud Ahmed, S.Ookawara 2019 International
6 Energy, exergy, economic and enviroeconomic (4E) analyses of solar distillation system using different absorbing materials Mohamed S.Yousef , Hamdy Hassan 2019 International
7 Energy, exergy, exergoeconomic and enviroeconomic (4E) evaluation of a new integration of solar still with photovoltaic panel Ayman Refat Abd Elbar, Mohamed S.Yousef, Hamdy Hassan 2019 Local
8 Performance Evaluation of Photovoltaic panel Integrated with Compound Parabolic Concentrator (CPC) Installed in Hot Arid Area, Egypt Mohamed S.YOUSEF , Ali K. ABDELRAHMAN, S A. NADA AND S. OOKAWARA 2015 International
9 Performance investigation of low – Concentration photovoltaic systems under hot and arid conditions: Experimental and numerical results Mohamed S. Yousef; Ali K. Abdel Rahman; S. Ookawara 2016 International
10 Performance investigation of low – Concentration photovoltaic systems under hot and arid conditions: Experimental and numerical results Mohamed S.Yousef, Ali K.Abdel Rahman , S.Ookawara 2019 International
Mohamed Shehata Saleh Khalil
Local Publication (1)
International Publication (10)
Total (11)
# Publication Authors Year Localization
1 A Hybrid Multibody System Algorithm Used in Mathematical Modeling of Delta Robot Mechanisms Mohamed Shehata, Haiyu GU, Zhuoran Huang and Mohamed E. M. Salem 2024 Local
2 Computational Design Scheme for Wind Turbine Drive-Train Based on Lagrange Multipliers Mohammed Saleh, Ayman Nadaa, Ahmed El-Betar, and Ahmed El-Assal 2017 International
3 Design of Wind Turbine Drive Train Based on Dynamic Lagrange Multipliers Mohamed Sh.Saleh 2015 International
4 Development of Dynamics for Design Procedure of Novel Grating Tiling Device with Experimental Validation Qingshun Bai , Mohamed Shehata , Ayman Nada and Zhongxi Shao 2021 International
5 Development of ’Dynamics for Design’ Procedure of Wind Turbine Drivetrain: Multibody Based Approach Mohamed Saleh; Ayman Nada; Ahmed El-Betar; Ahmed El-Assal 2016 International
6 Dynamics and FNTSM Control of Spacecraft with a Film Capture Pocket System Zhuoran Huang, Chao Tang, Qiang Yu, Mohamed Shehata, and Cheng Wei 2023 International
7 Efficient Modeling Procedure of Novel Grating Tiling Device Using Multibody System Approach Q Bai, M Shehata, A Nada 2020 International
8 Multibody Dynamics Modeling of Delta Robot with Experimental Validation Mohamed Elshami, Mohamed Shehata, Qingshun Bai, and Xuezeng Zhao 2021 International
9 Parameter Estimation for Multibody System Dynamic Model of Delta Robot From Experimental Data M. Shehata, M. Elshami, Q. Bai, X. Zhao 2021 International
10 Review of Modeling and Simulation Technologies Application to Wind Turbines Drive Train Mohamed saleh, Ahmed El-Betar, Ahmed El-Assal 2014 International
11 Review study of using Euler angles and Euler parameters in multibody modeling of spatial holonomic and non-holonomic systems Qingshun Bai; Mohamed Shehata 2022 International
Nour Mahmoud Massoud
Local Publication (1)
International Publication (3)
Total (4)
# Publication Authors Year Localization
1 Design and characterization of low Young’s modulus Ti-Zr-Nb-based medium entropy alloys assisted by extreme learning machine for biomedical applications Nour Mahmoud Eldabah, Amin Shoukry, Wael Khair-Eldeen, Sengo Kobayashi, Mohamed Abdel-Hady Gepreel 2023 International
2 Design and Characterization of New Ti-Zr-Nb-(Mn) Medium Entropy Alloys for Biomedical Applications Nour Mahmoud Eldabah, Sengo Kobayashi, Mohamed Abdel Hady Gepreel 2022 International
3 HYDROSTATIC TRAINING AND CHARACTERIZATION OF NEAR STOICHIOMETRIC Ni-Mn-Ga ALLOY” Nour M Eldabah, Saleh M Kayetbay, Mohamed A Gepreel, and Ahmed M Elassal 2019 Local
4 Neural Network Regressor for Designing Biomedical Low Elastic Modulus Ti-Zr-Nb-Mo Medium Entropy Alloys Nour Mahmoud Eldabah, Amin Shoukry, Wael M Khair-Eldeen, Sengo Kobayashi, Mohamed Abdel Hady Gepreel 2024 International
Osama Hamdy Mohamed
Local Publication (0)
International Publication (0)
Total (0)
Roubi Abdelsattar Roubi Nasr Zaied
Local Publication (1)
International Publication (9)
Total (10)
# Publication Authors Year Localization
1 “A Design of an Intelligent Maintenance Integrated System into Manufacturing Systems”, 978-1-4244-3507-4/09, IEEE, pp 1296-1301 Roubi Zaied and Kazem Abhary 2009 International
2 “A Neural Management Maintenance System for Manufacturing Systems”, 19th international conference for the international association of management of technology (IAMOT2010), 1569263581, Cairo, Egypt, March 8-11, pp 1-18. Zaied Roubi A, Nawara Gamal, Abdel-Salam Mohammad and Abhary Kazem 2010 International
3 “Fault Diagnosis of a Hydraulic Power System Using an Artificial Neural Network”, JKAU: Eng. Sci., Vol. 17 No. 1, 1427 A.H., pp 117 – 137. El-Betar A., Abdelhamed M M, El-Assal A and Zaied Roubi A 2006 Local
4 A computational comparison model to assess appliances applied to water taps Roubi A Zaied 2018 International
5 Development of water saving toilet-flushing mechanisms Roubi A Zaied 2018 International
6 Evaluating the Parameters Affecting Rationalization of Water Consumption in Ablution Shaaban M. Shaaban, Roubi A. Zaied 2015 International
7 Grooves into cylindrical shapes by wire electrochemical machining Sherif Araby, Roubi Zaied, Salah Haridy, Saleh Kaytbay 2016 International
8 Water use and time analysis in ablution from taps Roubi A Zaied 2016 International
9 تفسير علمي لمرض أيوب «عليه السلام» والأمراض المشابهة A Scientific Explanation of the prophet Ayoub’s Disease and Similar Diseases Roubi A.Zaied 2016 International
10 “Neural Management Maintenance System Integrated into Manufacturing Systems”, International Conference on Information Systems, Logistics and Supply Chain, ILS’2010 Casablanca (Morocco), April 14-16, pp 1-8. Zaied Roubi A, Nawara Gamal and Abdel-Salam Mohammad 2010 International
Saeed Anwar Elshahat Abdelazeem
Local Publication (0)
International Publication (9)
Total (9)
# Publication Authors Year Localization
1 Numerical study of solid particle erosion in a centrifugal pump for liquid–solid flow Fen Lai, Yu Wang, Saeed A EI-Shahat, Guojun Li, Xiangyuan Zhu 2019 International
2 Dynamic loading characterization of a horizontal axis tidal current turbine Saeed A El-Shahat, Guojun Li, Lei Fu 2020 International
3 Experimental and Numerical Investigation for the Aerodynamics of a Linear Compressor Cascade, Aviation Engineering Innovation Conference – AEIC, March 21-22, 2015, Luxor, Egypt. Saeed A. El-Shahat, Hesham M. El-Batsh, Ali M.A. Attia 2015 International
4 Experimental and Numerical Investigations of Pressure Loss and 3-D Flow Separations in a Linear Compressor Cascade Saeed A El-Shahat, Hesham M El-Batsh, Ali MA Attia, Guojun Li, Lei Fu 2020 International
5 Investigation of parameters affecting horizontal axis tidal current turbines modeling by blade element momentum theory Saeed A. El-Shahat;Guojun Li;Fen Lai;Lei Fu 2020 International
6 Investigation of wave–current interaction for a tidal current turbine Saeed A El-Shahat, Guojun Li, Lei Fu 2021 International
7 Investigations of Three-Dimensional Flow Field Development in an Axial Compressor Cascade Saeed A El-Shahat, Hesham M El-Batsh, Ali MA Attia, Guojun Li, Lei Fu 2019 International
8 Linear and non-linear wave theories coupled with a modified BEM model for quantifying dynamic loads of a tidal stream turbine Saeed A El-Shahat, Lei Fu, Guojun Li 2022 International
9 Numerical investigation of rotor–stator interaction for canned motor pump under partial load condition Xiangyuan Zhu, Saeed A El Shahat, Fen Lai, Wei Jiang, Guojun Li 2020 International
Sohier Mohamed Hussien Baioumy
Local Publication (0)
International Publication (0)
Total (0)
Abdullah Mohamed Gamal Abbas
Local Publication (0)
International Publication (4)
Total (4)
# Publication Authors Year Localization
1 Effect of data center servers’ power density on the decision of using in-row cooling or perimeter cooling A.M. Abbas; A.S. Huzayyin; T.A. Mouneer; S.A. Nada 2021 International
2 Effect of in-row cooling units numbers/locations on thermal and energy management of data centers servers Sameh A. Nada; Abdullah M. Abbas 2021 International
3 Solutions of thermal management problems for terminal racks of in-row cooling architectures in data centers S.A. Nada; A.M. Abbas 2021 International
4 Thermal management and performance enhancement of data centers architectures using aligned/staggered in-row cooling arrangements A.M. Abbas , A.S. Huzayyin , T.A. Mouneer , S.A. Nada 2021 International
Ahmed Mohamed El-Araby abdelaziz
Local Publication (0)
International Publication (2)
Total (2)
# Publication Authors Year Localization
1 A Comparative Study of Using MCDM Methods Integrated with Entropy Weight Method for Evaluating Facility Location Problem A El-Araby, I Sabry, A El-Assal 2022 International
2 Multi-Criteria Decision Making Approaches for Facilities Planning Problem AM El-Araby, I Sabry, A El-Assal 2021 International
Ahmed Mohammed Abdullatif Diab
Local Publication (1)
International Publication (0)
Total (1)
# Publication Authors Year Localization
1 Experimental and Numerical Design Optimization for the Geometrical Parameters Affecting Jet-pump Performance Ahmed M. Diab, Ahmed Soliman Huzayyin and Hesham M. El-Batsh 2023 Local
Ahmed Said Abdelaziz Attia
Local Publication (0)
International Publication (2)
Total (2)
# Publication Authors Year Localization
1 Effect of diethyl ether addition to waste cooking oil biodiesel on the combustion and emission characteristics of a swirl-stabilized premixed flame Radwan M. EL-Zohairy, Ahmed S. Attia, A.S. Huzayyin, Ahmed I. EL-Seesy 2023 International
2 Improving the biodiesel combustion and emission characteristics in the lean pre-vaporized premixed system using diethyl ether as a fuel additive R. M. EL-Zohairy; A. S. Attia; A. S. Huzayyin; A. I. EL-Seesy 2024 International
Amir Fares Abd Elaziz Ali
Local Publication (0)
International Publication (0)
Total (0)
Amr Ali Abdelaty Ali osman
Local Publication (0)
International Publication (3)
Total (3)
# Publication Authors Year Localization
1 Influence of Different Nano-Structured Fillers on the Performance of Epoxy Nanocomposites Amr Osman; Abdelmoty Elhakeem; Saleh Kaytbay; Abdalla Ahmed 2020 International
2 Mechanical, toughness and thermal properties of 2D material-reinforced epoxy composites S Han; Q Meng; Z Qiu; A Osman; R Cai; Y Yu; T Liu; S Araby 2019 International
3 Thermal, electrical and mechanical properties of graphene/nano-alumina/epoxy composites Amr Osman; Abdelmoty Elhakeem; Saleh Kaytbay; Abdalla Ahmed 2020 International
Amr Marzuq Mohamed
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Development of a New 5 DoF Robotic Assistant System for Neurosurgery A Marzuq; M Magdy; A El-Assal; BM Eltoukhy 2019 International
Amro Abdelalim Shafik Mohamed Ibrahim
Local Publication (0)
International Publication (6)
Total (6)
# Publication Authors Year Localization
1 An Educational Scheme for a CNC Drilling Machine Salah Haridy, Zhang Wu, and Amro Shafik 2012 International
2 An Integrated Design for a CNC Machine A Shafik, S Haridy 2014 International
3 CMAC Based Motion Control of Electrohydraulic Servo Systems Amro Shafik, Magdy Abdelhameed, and Ahmed Kassem 2013 International
4 CMAC Neural Network: Modeling, Simulation and a Comparative Study of Learning Algorithms Magdy Abdelhameed, Ahmed Kassem, and Amro Shafik 2010 International
5 CMAC PV parameters variations and learning schemes: A study on electrohydraulic servo system Amro Shafik, Magdy Abdelhameed, and Ahmed Kassem 2013 International
6 Piezoelectric Motor Technology: A Review A Shafik, RB Mrad 2016 International
Belal Yehia Ibrahim El-said Belal
Local Publication (0)
International Publication (3)
Total (3)
# Publication Authors Year Localization
1 Effect of waste cooking oil methyl ester – Jet A-1 fuel blends on emissions and combustion characteristics of a swirl-stabilized lean pre-vaporized premixed flame Ali M.A.Attia; Belal Y.Belal; H.M.El-Batsh; H.A.Moneib 2020 International
2 Flame Characteristics and Emissions of Lean Pre-Vaporized Pre-Mixed Biodiesel/Jet A-1 Blends in Gas Turbines Belal Y. Belal, Ali M.A. Attia, H. M. El-Batsh, H.A. Moneib 2018 International
3 The Effect of Swirl Burner Design Configuration on Combustion and Emission Characteristics of Lean Pre-vaporized Premixed Flames Belal Y. Belal; Gesheng Li; Zunhua Zhang; H. M. El-Batsh; Hany A. Moneib; Ali M. A. Attia 2021 International
Esraa Elsayed Elghazaly Abdelhamed Badawy
Local Publication (1)
International Publication (0)
Total (1)
# Publication Authors Year Localization
1 Using Evaporative Cooling to enhance thermal comfort conditions in Semi-open Areas. Esraa E. Badawy, Tarek . A. Mouneer , Ahmed S. Huzayyin 2024 Local
Hassan Ahmed Mohamed Hassan
Local Publication (0)
International Publication (0)
Total (0)
Hazem Khaled Mohamed
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 CFD simulation of pressure oscillation and cavitation phenomena in the pilot stage of deflector jet servo-valve with large eddy simulations Hazem Khaled,Songjing Li ,Saha Krishna 2020 International
Ibrahim Mostafa Mahmoud Mostafa Awad
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Performance Enhancement of Household Refrigerator Using Phase Change Materials Ibrahim I.M, A.S. Huzzayin, M.K. Rady 2015 International
Khaled Kadry Abd-Elnaby Abo-Elelaa Hamza
Local Publication (1)
International Publication (0)
Total (1)
# Publication Authors Year Localization
1 Design and implementation of intelligent controller for discrete event manufacturing ahmed M. Elassal, Magdy M. Abdelhameed, Khaled K. Hamza 2015 Local
Mahmoud Abdul Aziz Hassan Galal
Local Publication (1)
International Publication (2)
Total (3)
# Publication Authors Year Localization
1 A Comparison of the Performance and Power Requirements for Switchable Damper and Active Suspension Systems Aref M.A. Soliman, Mahmoud A.H. Galal and Nader A. Mansour 2020 Local
2 Dry Friction Occurring in the Suspensions for Passive and Switchable Damper Systems and Its Effect on Ride Comfort Aref M. A. Soliman and Mahmoud A. Hassan 2018 International
3 Evaluation of Ride Performance through a Comparative Study of Switchable Damper and Active Suspension by Using Fuzzy and Linear Quadratic Regulator Controller’s Strategies Aref M. A. Soliman, Mahmoud A. H. Galal, Nader A. Mohamed 2021 International
Mahmoud Ebrahim Hasan
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Experimental Examination for the Electric Power Generation of a Commercial Small-scale Wind Turbine with Modified Aerodynamic Design Mahmoud E. Hasan; Abdelgalil Eltayesh; Mohamed I. Awaad; Hesham M. El-Batsh 2022 International
Mahmoud Saad Sultan Waly
Local Publication (0)
International Publication (6)
Total (6)
# Publication Authors Year Localization
1 Combustion and emissions characteristics of a diesel engine fuelled with diesel fuel and different concentrations of amino-functionalized multi-walled carbon nanotube Mahmoud S. Waly;Ahmed I. EL-Seesy;Hesham M. El-Batsh;Radwan M. El-Zoheiry 2023 International
2 Enhancement of the combustion and stability aspects of diesel-methanol-hydrous methanol blends utilizing n-octanol, diethyl ether, and nanoparticle additives Ahmed I. EL-Seesy, Mahmoud S. Waly, Zhixia He, Hesham M. El-Batsh, Alhassan Nasser, and Radwan M. El-Zoheiry 2022 International
3 Enhancement of the diesel fuel characteristics by using nitrogen-doped multi-walled carbon nanotube additives Ahmed I. EL-Seesy, Mahmoud S. Waly,Hesham M. El-Batsh, Radwan M. El-Zoheiry 2023 International
4 Enhancement of the waste cooking oil biodiesel usability in the diesel engine by using n-decanol, nitrogen-doped, and amino-functionalized multi-walled carbon nanotube Ahmed I. EL-Seesy, Mahmoud S. Waly, Hesham M. El-Batsh, Radwan M. El-Zoheiry 2023 International
5 Improvement of the combustion, emission, and stability features of diesel‑methanol blends using n‑decanol as cosolvent Ahmed I. EL-Seesy, Mahmoud S. Waly, Alhassan Nasser, and Radwan M. El-Zoheiry 2022 International
6 Influence of quaternary combinations of biodiesel/methanol/n-octanol/diethyl ether from waste cooking oil on combustion, emission, and stability aspects of a diesel engine Ahmed I. EL-Seesy;Mahmoud S. Waly;Zhixia He;Hesham M. El-Batsh;Alhassan Nasser;Radwan M. El-Zoheiry 2021 International
Mohamed Sharaf
Local Publication (0)
International Publication (2)
Total (2)
# Publication Authors Year Localization
1 Energy, exergy, economic, and enviroeconomic assessment of a photovoltaic module incorporated with a paraffin-metal foam composite: An experimental study Mohamed S. Yousef, Mohamed Sharaf, A.S. Huzayyin 2021 International
2 Performance enhancement of photovoltaic cells using phase change material (PCM) in winter MohamedSharaf;A.S.Huzayyin;Mohamed S.Yousef 2021 International
Mohamed ahmed aeid tamia
Local Publication (0)
International Publication (0)
Total (0)
Mohamed Ismail Mohamed
Local Publication (0)
International Publication (2)
Total (2)
# Publication Authors Year Localization
1 Quality monitoring in multistage manufacturing systems by using machine learning techniques Mohamed Ismail; Noha A. Mostafa; Ahmed El-Assal 2021 International
2 Utilization of Machine Learning Techniques for Quality Monitoring and Prediction Mohamed Ismail; Noha A. Mostafa; Ahmed El-Assal 2021 International
Mohamed Mostafa Elshami
Local Publication (0)
International Publication (2)
Total (2)
# Publication Authors Year Localization
1 Multibody Dynamics Modeling of Delta Robot with Experimental Validation Mohamed Elshami, Mohamed Sh. Saleh, Q. Bai, X. Zhao 2021 International
2 Parameter Estimation for Multibody System Dynamic Model of Delta Robot From Experimental Data M. Shehata, M. Elshami, Q. Bai, X. Zhao 2021 International
Mohamed Tarek Abd Elmoaty
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Passive Flow Separation Control in Linear Compressor Cascade Mohamed EL-Sheikh; Hesham El-Batsh; Ali M.A. Attia; El-Sayed Zanoun 2019 International
Mostafa Eid Abd El maboud Ahmed
Local Publication (0)
International Publication (4)
Total (4)
# Publication Authors Year Localization
1 Electrical, Thermal, and Mechanical Characterization of Hot Coined Carbon Fiber Reinforced Pure Aluminium Composites Mostafa Eid;Saleh Kaytbay;Ahmed El-Assal;Omayma Elkady 2022 International
2 Mechanical and Physical Properties of Carbon Fiber Reinforced Aluminium Matrix Composites Fabricated by Powder Metallurgy Technique Mostafa Eid Abd EL-Maboud, Saleh Mohammed Kayetbay1, and Ahmed Mohamed El-Assal 2021 International
3 Microstructure and mechanical properties of CF/Al composites fabricated by hot coining technique Mostafa Eid, Saleh Kaytbay, Omayma Elkady, Ahmed El-Assal 2021 International
4 Thermal, Electrical Conductivity and CTE Of CF Reinforced Al Composites Fabricated By Hot Compaction Mostafa Eid; Saleh Kayetbay; Omayma Elkady; Ahmed El-Assal 2021 International
Muhammed Gaafar
Local Publication (0)
International Publication (2)
Total (2)
# Publication Authors Year Localization
1 Design and Analysis of Experiments in ANFIS Modeling of a 3-DOF Planner Manipulator Muhammed Gaafar;Ahmed Maged; M Magdy; Nader A Mansour; Ahmed El-Betar 2018 International
2 Development of a New Compliant Remote Center of Motion (RCM) Mechanism for Vitreoretinal Surgery Muhammed Gaafar, Mahmoud Magdy, Abdullah T. Elgammal, Ahmed El-Betar andAhmed Saeed 2020 International
Naglaa Mostafa Abd -Elaziz Ali
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 CFD investigation of airflow pattern, temperature distribution and thermal comfort of UFAD system for theater buildings applications Eng. Naglaa Mostafa Abd-El-Aziz Ali 2016 International
Noah E. El-Zathry
Local Publication (4)
International Publication (4)
Total (8)
# Publication Authors Year Localization
1 Effect of rotational speed and penetration depth on Al-Mg-Si welded T-joints through underwater and conventional friction stir welding Sabry, I., Singh, V. P., Alkhedher, M., El-Zathry, N. E., Mourad, A. H. I., & Naseri, M 2025 International
2 Experimental investigation on joining process of (plate to pipe) aluminum alloy 6082-T6 using friction stir welding Ibrahim Sabry, Noah E. El– Zathry, A.M. Hewidy 2022 Local
3 Extended hybrid statistical tools ANFIS-GA to optimize underwater friction stir welding process parameters for ultimate tensile strength amelioration Ibrahim Sabry , Noah E El-Zathry, FT El-Bahrawy Given, M Abdel Ghaffar 2021 Local
4 Friction Stir Welded 6063-Aluminium Joint Mechanical Characteristics Prediction Methodology Based on Monte Carlo Simulation Ibrahim Sabry, Noah E El-Zathry, AM Hewidy 2022 Local
5 Friction Stir-Based Techniques: An Overview Noah E El-Zathry, Stephen Akinlabi, Wai Lok Woo, Vivek Patel, Rasheedat M Mahamood 2024 International
6 Implementation of hybrid RSM-GA optimization techniques in underwater friction stir welding I Sabry, N E El-Zathry, N Gadallah and M Abdel Ghafaar 2022 International
7 Optimization of friction stir welding of AA6082-T6 ‎parameters ‎using analysis of variance and grey relational ‎analysis Noah E El-Zathry, Ashraf I Hassan, Ahmed A El-Betar, Ibrahim Sabry 2022 Local
8 Taguchi-based optimisation of FSW parameters for advancement in aerospace materials: Al-Li 2060 alloy Noah E El-Zathry, Stephen Akinlabi, Wai Lok Woo, Vivek Patel, Rasheedat M Mahamood 2024 International
osman samir
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Performance enhancement and comprehensive experimental comparative study of cold plate cooling of electronic servers using different configurations of mini-channels flow O.S. Osman; R. M. El-Zoheiry; M. Elsharnoby; S.A. Nada; 2021 International
Rami Mohamed Mohamed Mohamed Saleh
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Thermal characteristics and energy saving of charging/discharging processes of PCM in air free cooling with minimal temperature differences S.A. Nada, W.G. Alshaer , R.M. Saleh 2019 International
Shaimaa Fouad Mohammed Abdelhamid Ibrahim Seyam
Local Publication (1)
International Publication (14)
Total (15)
# Publication Authors Year Localization
1 Analysis of a clean hydrogen liquefaction plant integrated with a geothermal system Shaimaa Seyam; Ibrahim Dincer; Martin Agelin-Chaab 2020 International
2 Analysis of a newly developed locomotive engine employing sustainable fuel blends with hydrogen Shaimaa Seyam; Ibrahim Dincer; Martin Agelin-Chaab 2022 International
3 Development and assessment of cleaner locomotive powering system with alternative fuels Shaimaa Seyam; Ibrahim Dincer; Martin Agelin-Chaab 2021 International
4 Development of a clean power plant integrated with a solar farm for a sustainable community Shaimaa Seyam; Ibrahim Dincer; Martin Agelin-Chaab 2020 International
5 Economic and environmental impact assessments of hybridized aircraft engines with hydrogen and other fuels Shaimaa Seyam; Ibrahim Dincer; Martin Agelin-Chaab 2022 International
6 Exergetic assessment of a newly designed solid oxide fuel cell-based system combined with a propulsion engine Shaimaa Seyam; Ibrahim Dincer; Martin Agelin-Chaab 2022 International
7 Exergetic, exergoeconomic and exergoenvironmental analyses of a hybrid combined locomotive powering system for rail transportation Shaimaa Seyam; Ibrahim Dincer; Martin Agelin-Chaab Clean 2021 International
8 Experimental and numerical investigation of a condensation repellent radiant cooling panel system Ahmed Huzayyin; Hesham El-Batsh; Sameh Nada; Shaimaa Seyam 2012 Local
9 Experimental and numerical investigation of the radiant panel heating system using scale room model. Shaimaa Seyam; Ahmed Huzayyin; Hesham El-Batsh; Sameh Nada 2014 International
10 Investigation of Potential Fuels for Hybrid Molten Carbonate Fuel Cell-Based Aircraft Propulsion Systems Shaimaa Seyam; Ibrahim Dincer; Martin Agelin-Chaab 2021 International
11 Investigation of Two Hybrid Aircraft Propulsion and Powering Systems Using Alternative Fuels Shaimaa Seyam; Ibrahim Dincer; Martin Agelin-Chaab 2021 International
12 Multi-objective Optimization of Hydrogen Production in Hybrid Renewable Energy Systems Shaimaa Seyam; Khaled H. M. Al-Hamed; Ali M. M. I. Qureshy; Ibrahim Dincer; Martin Agelin-Chaab; Shahryar Rahnamayan 2019 International
13 Novel hybrid aircraft propulsion systems using hydrogen, methane, methanol, ethanol and dimethyl ether as alternative fuels Shaimaa Seyam; Ibrahim Dincer; Martin Agelin-Chaab 2021 International
14 The impact of greenery systems on building energy: Systematic review Shaimaa Seyam 2019 International
15 Thermodynamic analysis of a hybrid energy system using geothermal and solar energy sources with thermal storage in a residential building Shaimaa Seyam; Ibrahim Dincer; Martin Agelin‐Chaab Martin 2020 International
Shereif Moneer Hassan
Local Publication (1)
International Publication (0)
Total (1)
# Publication Authors Year Localization
1 Control strategies of the Limited Bandwidth Hydro-pneumatic Active Suspension for Road Vehicle Aref M.A. Soliman, Ahmed El-Betar, Mina M. Kaldas and Shereif M.H. Abd-Salam 2020 Local
Tarek Ahmed Mohamed Salaheldin Elattar
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Multi-objective Optimization on Surface Roughness of 3D-Printed Parts by Fused Deposition Modelling Tarek El-Attar, Ibrahim Sabry, Ahmed El-Assal 2022 International
Yahya Abdelhameed Amer
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Numerical Investigation on the Crater Geometry in Abrasive Water Jet Turning Process Y. Abdelhameed; A. I. Hassan; Saleh Kaytbay 2019 International
Yasser Sayed Ahmed Abdelaziz Mahrous Shama
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Development of a New Long Stroke Nanopositioning System With Modular Pantograph Compliant Mechanism Yasser Sayed Shama;Mahmoud Magdy;Nader A. Mansour;Ahmed El-Betar;Ahmed M. El-Assal 2019 International
Abdallah Ahmed Shehata Mahmoud
Local Publication (0)
International Publication (0)
Total (0)
Abdallah Hisham Mohamed Taher
Local Publication (0)
International Publication (0)
Total (0)
Abdelmaged Elsayed Abdelmaged
Local Publication (0)
International Publication (0)
Total (0)
Abdelrahman Mossad Elshaer
Local Publication (0)
International Publication (0)
Total (0)
Ahmed Adel Ghoneimy
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 The Development of a Robust Rigid-Flexible Interface and Continuum Model for an Elephant's Trunk Using Hybrid Coordinate Formulations Ahmed Ghoneimy; Mohamed O. Helmy; Ayman Nada; Ahmed El-Assal 2025 International
Ahmed Ezzat Tohami Azab
Local Publication (0)
International Publication (4)
Total (4)
# Publication Authors Year Localization
1 A Design Thinking Approach for Building a Dynamic Truck Appointment Scheduling System for Smart Container Terminals Ahmed Azab , Amr Eltawil 2016 International
2 A Dynamic and Collaborative Truck Appointment Management System in Container Terminals Ahmed Azab, Ahmed Karam, Amr Eltawil 2017 International
3 A Simulation Based Study Of The Effect Of Truck Arrival Patterns On Truck Turn Time In Container Terminals Ahmed Azab , Amr Eltawil 2016 International
4 OnTimeCargo: A Smart Transportation System Development in Logistics Management by a Design Thinking Approach Ahmed Azab, Noha A. Mostafa, Jaehyun Park 2016 International
Ahmed Mohamed Abdelfattah
Local Publication (0)
International Publication (0)
Total (0)
Ahmed Mohamed Ahmed El-Sankary
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Study of Using Phase Change Materials in Buildings Free Cooling 2015 International
Ahmed mohamed ibrahim youssef
Local Publication (0)
International Publication (0)
Total (0)
Ahmed Tarek Mohamed Abdellatif
Local Publication (0)
International Publication (0)
Total (0)
Ayman Arthanios Nasr Sefeen
Local Publication (0)
International Publication (0)
Total (0)
Ayman Sayed Ahmed Abdelaziz
Local Publication (1)
International Publication (0)
Total (1)
# Publication Authors Year Localization
1 A State Machine-Based Approach for Implementing SPI Communication on FPGAs Ayman Shama; Manar Lashin; Ayman Nada 2025 Local
Bassem Ahmed Mohamed Hegazy
Local Publication (1)
International Publication (0)
Total (1)
# Publication Authors Year Localization
1 An Experimental Investigation on Machining of 90W-7Ni-3Fe Alloys Using Wire Electrical Discharge Machining Bassem A. Mohamed ; Saleh H. Kaytbay 2023 Local
Ebrahim Atef Moheb
Local Publication (0)
International Publication (0)
Total (0)
Hytham Adel Tag
Local Publication (1)
International Publication (0)
Total (1)
# Publication Authors Year Localization
1 Adaptive Robotic Grasping with Replay Tail Memory Enhancement Tag, Hytham A., Abdullah T. Elgammal, and Ahmed M. Elassa. 2024 Local
Ibrahim Abdel-Hady Ibrahim Abdel-Ghani
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Stabilization of Driving Velocity Constraints for Self-balanced Robot Ibrahim Abdel-Hady, Mona A. Bayoumi,Nader A.Mansour and Ayman A. Nada 2024 International
Ibrahim Ahmed Elshafey Ahmed
Local Publication (0)
International Publication (0)
Total (0)
Khaled Yehia Hussien Salem
Local Publication (0)
International Publication (0)
Total (0)
Mahmoud Adel Shehta Ghonimy
Local Publication (0)
International Publication (0)
Total (0)
Mahmoud Khaled Zeinhom
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 Oxyhydrogen production and optimization using electrolysis and its application in engines Ahmed I. EL-Seesy, Mahmoud Aboukhalifa 2024 International
Mohamed Ali Ibrahim Mahmoud
Local Publication (0)
International Publication (0)
Total (0)
mohamed ashraf
Local Publication (1)
International Publication (2)
Total (3)
# Publication Authors Year Localization
1 Energy efficient air conditioning and fresh water production hybrid system for low-humidity buildings applications S.A. Nada, M. A. Mahmoud, R. Khater, 2019 Local
2 Experimental investigation of energy and exergy performance of a direct evaporative cooler using a new pad type S.A. Nada; A. S. Fouda; M.A Mahmoud; Hassan Elattar 2019 International
3 Thermal characteristics enhancement of helical cooling-dehumidifying coils using strips fins S.A. Nada; R. Khater; M.A Mahmoud 2020 International
Mohamed Ashraf Khalil
Local Publication (0)
International Publication (0)
Total (0)
Mohamed El sayed Ibrahim El sayed
Local Publication (0)
International Publication (0)
Total (0)
Mohamed Esam Mohamed Mohamed
Local Publication (0)
International Publication (0)
Total (0)
Mohamed Khaled Abead Motawa
Local Publication (0)
International Publication (0)
Total (0)
Mohamed Khatter El sayed Khatter
Local Publication (0)
International Publication (0)
Total (0)
Mohamed Lotfy Abdelbaset Abdelghany
Local Publication (0)
International Publication (0)
Total (0)
mohamed Sayed abdelhamid
Local Publication (0)
International Publication (0)
Total (0)
Mohamed Shoieb Abdelgawad
Local Publication (0)
International Publication (0)
Total (0)
Mohamed Yasser Gad Ali
Local Publication (0)
International Publication (0)
Total (0)
Mohammad Nasir Abdellmenaem Shalan
Local Publication (0)
International Publication (0)
Total (0)
Mohanad Yehia Zakria Abdelhlem
Local Publication (0)
International Publication (0)
Total (0)
Mostafa Khaled Abdelhamed Mostafa
Local Publication (0)
International Publication (0)
Total (0)
Naden Mohamed Ahmed Elhadad
Local Publication (0)
International Publication (0)
Total (0)
Omar Hesham Ramdan Abdelgawad
Local Publication (0)
International Publication (0)
Total (0)
Radwa Mohamed Ayman Ebrahim
Local Publication (0)
International Publication (0)
Total (0)
Rwida Mohamed Ayman Ibrahim
Local Publication (0)
International Publication (0)
Total (0)
Shamel Abdelhamed Sayed Abdou
Local Publication (0)
International Publication (0)
Total (0)
Ahmed Elsayed Ahmed Kessem
Local Publication (3)
International Publication (1)
Total (4)
# Publication Authors Year Localization
1 "An Experimental Study of Strip Rolling Process of Commercial aluminum",Proceedings of the 9th International Conference, 16 – 18 May. A.M.El-Assal, A.M.Hakeem, A.Kassem, and A.Abou-Sena. 2000 Local
2 "Acomparative study of existing rolling modeles applied to aluminum",Proceedings of the 9th International Conference, 16 – 18 . A.M.El-Assal, A.M.Hakeem, A.Kassem, and A.Abou-Sena. 2000 Local
3 ,s Technical paper entitled "A study on the effect of Mg Fe Si and low Ce Rare – Earth ( Mischmetal ) on Graphite Morphology of low S – iron", has been adjusted as the best technical paper published in the Indian Foundry Journal in and has been recommended for P.Banerjee best technical paper Award. Ahmed 1997 Local
4 CMAC Neural Network: Modeling, Simulation and a comparative Study of Learning Algorithms”, Proceedings of 11th Middle Eastern Simulation Multiconference (EUROSIS MESM 2010), December 2010, pp. 67-74. Magdy Abdelhameed, Ahmed Kassem, and Amro Shafik 2010 International
Al Sayed Ahmed Mohie Nasereldein
Local Publication (0)
International Publication (1)
Total (1)
# Publication Authors Year Localization
1 An Experimental Investigation of the Factors which Affect on the Performance of a Single Basin Typical Double Slope Solar Still for Water Desalination Zedan, A. S.,Nasr Eldin, S. A. M 2015 International
Mohammed Abdel-Latif Elsharnoby
Local Publication (0)
International Publication (0)
Total (0)
Refaat Mohamed Hassan Khater
Local Publication (0)
International Publication (0)
Total (0)
Samia Nasrueddeen Abdo
Local Publication (2)
International Publication (2)
Total (4)
# Publication Authors Year Localization
1 A study of hydraulic resistivity, Alexandria University Samia Nasr and Kamal Abd Alazeez 1988 Local
2 a study of hydraulic waste in non-return valves, Alexandria University Samia Nasr and Hassan Awad, 2000 Local
3 Effect of Secondary Flows on Heat Transfer of a Gas Turbine Blade‏ HM El-Batsh; SA Nada; SN Abdo; AA El-Tayesh‏ 2013 International
4 THREE DIMENSIONAL HEAT TRANSFER CHARACTERISTICS THROUGH A LINEAR GAS TURBINE CASCADE HM El-Batsh; SA Nada; SN Abdo; A Mohamed 2012 International