|
|
|
Ali Ali Abdul Aziz Ali
|
|
|
|
|
Sameh Shawky Habib Abadeer
|
|
|
|
|
AbdelKader AbdelKarim Ibrahim
|
|
|
| # |
details |
| 1 |
Colleges And Institutes Sector at Yanbu, Royal Commission for Jubail & Yanbu, KSA- Head of Quality Assurance and Accreditation (July 2012-July-2013) |
| 2 |
Consultant for ISO 9001-2000 Qualification for the following Companies:
• Arabic union Co. for Shipment and discharge, Alexandria, 2001.
• Egyptian Co. for general storehouses, Alexandria, 2002.
|
| 3 |
Consultant For Project Management Unit, Ministry of Higher Education, Egypt, Sep. 2013- Sep. 2014, with the following duties:
• Supervise and follow up the labs international accreditation projects.
• Supervise and follow up the projects of development of Universities’ administrations systems (ISO 9001-2008). |
| 4 |
Delta Academy for science – Al-Mansoura, Part time. 2002- 2005
Teaching the following subjects
• Production Management
• Operation research 1
• Operation research 2
• System programming
• Management Information System (MIS)
• Project Management
|
| 5 |
Head of general technical subjects and welding section, Vocational Training Center, Defense, Dubai, 1991:1996
• Supervise workshop layout and machines installation,
• preparing and supervise the courses of different technical seminars,
|
| 6 |
Yanbu Industrial college, Yanbu El-Senaeia, K.S.A. (ABET, and ACBSP Accredited college) , Sep. 2006- July 2012.
• Assistance professor, Teaching the following courses:
o Mechanical Design II.
o Introduction to manufacturing technology.
o Introduction to drafting
o Mechanical drafting
• Member of the committee for preparing the training program for 2 years SAFRA Co. students training.
• B.Sc. program Coordinator from Sep. 2007- Feb. 2010.
• Member of the ABET accreditation committee For Associate degree programs 2007/2009, and B.Sc. program 2008/2010.
• Head of Quality assurance and Accreditation Department. Feb. 2010- Now
Responsible for the following accreditation:
TAC of ABET, Inc., ASBSP, and CEA
|
| 7 |
• Academic Activities
1 Shoubra faculty of Engineering, Zagazig university as:
-Teaching assistant, May 1983- Mar. 1987.
-Ass. Lecturer, Mar.1987- Oct.1990.
-Ass. Prof., 1990 - 2003
- Associate Professor, 18 Nov. 2003- now
Teaching the following subjects:
• Machine Design..
• Theory of Vibration
• Machine Construction.
• Theory of Machines.
• Engineering Drawing.
• Non traditional machining.
• Engineering metrology.
• Computers.
• Production management and Quality control
• Computer Aided Manufacturing (CAM)
• Computer Numerical Control.
• Maintenance using vibration And computer applications.
|
| 8 |
• General coordinator for administrative quality at Banha University. Egypt, Dec. 2016 |
| 9 |
• Head of General Subjects Department, Credit hours system, Shoubra faculty of Engineering, Benha University, Egypt. Nov. 2016 |
| 10 |
• Practical Activities
1. Design and planning manager, Misr Trailer Co., 1983:1987 with the following activities:
-Planning and layout of the factory, Supervise all steel construction processes
-Design and supervise the production for the prototypes of the trailers, semi-trailers, tippers, low bed trailers.
2. Member of the Consultation group For Midequip Co. for hospital equipping.1996-1997., as follows:
-Design and supervise the steel construction works, and pre-installation for medical equipment for Sharm El-Sheikh hospital.
-Supervise pre-installation for medical equipment including all mechanical and Electrical works for the following cancer centers: Damanhour center, Domiat Center, El- Menia center, and El-Salam center
-Supervise renewal of the following hospitals: Suize Chest hospital, And Rashid hospital
3- Consultant for International office for engineering and trading, Electrolab Co., Ten TEC Co. Oct. 1999 – Oct. 2000.
4- Consultant for Arab Contractor ( Shoubra Branch) 2000 – 2006.
With the following activities:
• Supervise the repair of different cranes
• Design for 3 Axle Tipping Trailer, flat bed trailer, and low bed trailer |
|
|
|
Ahmed Maged Ahmed Mohamed Osman
|
|
|
|
|
Ahmed Mohamed Gaafer Marzouk
|
|
|
|
|
Ahmed Said Abdel Hafez Zedan
|
|
|
|
|
Attia Hussein Gomaa
|
|
|
| # |
details |
| 1 |
Aluminum Company of Egypt - Nag Hammady, Egypt |
| 2 |
Amal International Center in Cairo, Egypt (AIC) |
| 3 |
CAPSCU, Faculty of Eng., Cairo University |
| 4 |
Egyptian Maintenance Company, Cairo, Egypt |
| 5 |
El-Naser Castings Co., Cairo, Egypt |
| 6 |
El-Sharkia Company for Tobacco, Cairo, Egypt |
| 7 |
ENPPI Co., Cairo, Egypt |
| 8 |
Faculty of Engineering - Cairo University, Egypt |
| 9 |
Helwan Iron Foundries Co. (Military Factory 9), Cairo, Egypt |
| 10 |
Helwan Non-Ferrous Co. (Military Factory 63), Cairo, Egypt |
| 11 |
Industrial Modernisation Centre (IMC-EEMDC) |
| 12 |
PETROJET Company, Cairo, Egypt |
| 13 |
Prof. & Consultant at Eng. Service - American Univ. in Cairo |
| 14 |
Tribology and Spare Parts Center, Cairo Univ. (TSP-CU) |
|
|
|
Eed A. A. Abdel-Hadi
|
|
|
| # |
details |
| 1 |
الأشراف على تصميم وتنفيذ الأجهزة الآتية:
1-جهاز انتقال الحرارة بالحمل الحر من الأجسام المعدنية مع الهواء
2-جهاز انتقال الحرارة بالحمل الحراري الحر من الأجسام في السوائل (محاكاة لماعل نووي
3-جهاز تكثييف ابخرة مركبات التبريد
4- جهاز الغليان الحر لمركبات التبريد
5- جهاز تحلية المياة المالحة باستخدام الطاقة الشمسية
6- عدد 2 مجفف شمسي
7- عدد 2 غرفة خشبية معزولة لدراسة التدفئة الغير مباشرة باستخدام الطاقة الشمسية
8- عدد 2 جهاز لتخزين الطاقة الحرارية من السوائل او الغازات في شمع البرافين
9- جهاز ترطيب باستخدام المواد المسامية
10- جهاز لدراسة استقرار اللهب لخليط سابق التجهيز من وقود غازي والهواء
|
| 2 |
بعض الأنشطة بالمملكة العربية السعودية: (الكلية التقنية ببريدة)
تصميم وتنفيذ العديد من الأجهزة التعليمية :
1- مثل مبين القدرة للمحركات
2- جهاز قياس كثافة الدخان في محركات الديزل
3- جهاز الكشف عن أعطال المبردات
4- المشاركة في تنفيذ سيارة برمائية (حوامة-Hover craft)
|
|
|
|
El Sayed Youssef Suleiman El Kady
|
|
|
|
Fareda Sayed Ahmed
|
|
|
|
|
Fouad Helmy sayed Helmy Mahmoud
|
|
|
| # |
details |
| 1 |
factory for manufacturing light bulbs and lamp [Agreement with the government of china] |
| 2 |
Factory for manufacturing Panel Boards under license of SIEMENS GERMANY |
| 3 |
Feasibility studies and solution provider with both extrusion machines for manufacturing electric cables and
production line for manufacturing steel tubes |
|
|
|
Ghazy mohamed rateb Assassa
|
|
|
| # |
details |
| 1 |
Curriculum and course materials development using teaching-by-objective approach for the modernization program of the Egyptian Air Force Academy. TELEMEDIA Inc.( Educational Consultants based in Chicago,U.S.A.). |
| 2 |
Curriculum development and course specification for the Information Technology programme, Information Technology department, College of Computer and Information Sciences, King Saud university. 2004 |
| 3 |
Curriculum development and course specification for the Software Engineering programme, Software Engineering department, College of Computer and Information Sciences, King Saud university. 2006. |
| 4 |
Curriculum development and course specification for undergraduate level, Faculty of Engineering at Shoubra, 1998-1999. |
| 5 |
Curriculum development and course specification of the Joint PhD Programme in Computer and Information Sciences, College of Computer and Information Sciences, King Saud university. 2006 -2007. |
| 6 |
Curriculum development, Tiba Training Institute, Madina, Saudi Arabia, Feb, 2002. |
| 7 |
Master programme curriculum development and course specification, Department of Computer Science, College of Computer and Information Sciences, King Saud University, 2002. |
| 8 |
Master programme curriculum development and course specification, Faculty of Engineering at Shoubra, 1998-1999 |
|
|
|
Hamdy Mohamed Ali Kandiel
|
|
|
|
|
Hossam El-Din Mohamed Zakaria
|
|
|
|
|
Maher Gamil Ahmed Fathy Higazy
|
|
|
|
|
Mahmoud Ibrahim Hussien Mansour
|
|
|
|
|
Mohamed Safwat ZAHRAN
|
|
|
|
|
Mohamed Fayek A.M. Abd-Rabbo
|
|
|
| # |
details |
| 1 |
13) Design of the following pumping station:
a- 11.5 m3/sec b-4 m3/sec c- 1.5 m3/sec
For El Gezera irrigation project –Iraq, during the period 1984-1988
|
| 2 |
Air-conditioning system design and software analysis |
| 3 |
Chillers systems control training course.. Dubai |
| 4 |
Course and networking in the field of computers 1993- till now |
| 5 |
Design a group of multistage centrifugal pumps Using computer modeling CFD for Turkish firm. |
| 6 |
Design of deep freezers and refrigerators factory at Abo Rawash Giza, Egypt, 1980 estimated cost 7 million LE |
| 7 |
Design of metal sheets painting shop for Cairo metal work 1979 estimated cost 3 million LE. |
| 8 |
Diesel engines maintenance training course Saudi Arabia. |
| 9 |
Industrial safety training course Saudi Arabia |
| 10 |
Mechanical measurements course through the Arab training bureau 2008 |
| 11 |
New technologies in the field of Water desalination , training course, Egypt |
| 12 |
Oil storage tanks design and inspections through the Arab training bureau 2008 |
| 13 |
Pumps maintenance and operation through the Arab training bureau 2006 |
| 14 |
Quality assurance for the erection of Inshas nuclear reactor. |
| 15 |
Redesign water pipe line for a pumping station 10 km for the mechanical& electrical authority Ministry of irrigation.2008 |
|
|
|
Mohamed Salah Abas
|
|
|
|
|
Mohammad Hassan Hassan Sakr
|
|
|
|
|
Mustafa Zaki Zahran
|
|
|
|
|
Osama Ezzat Abdellatif
|
|
|
| # |
details |
| 1 |
Consultant of Alexandria University Desalination Studies and Technology Center (ADST) |
| 2 |
Consultant of German Fund Agency in Egypt for “small farms “…. |
| 3 |
Consultant of Nile Engineering Consultant office, Egypt “N.E.C.B.” |
| 4 |
Consultant of Roshdy company of Metallic Industries |
| 5 |
Consultant of the Arab Steel Company |
| 6 |
Egyptian Manger of the American Fund of “Development of Network System of water supply authority”. |
|
|
|
Ramadan Mohamed Abdel-Aziz
|
|
|
|
|
Ramadan Youssef Sakr Moustafa
|
|
|
|
|
Reda Ibrahim Ibrahim El-Ghnam
|
|
|
| # |
details |
| 1 |
C++ and visual basic computer programmer |
|
|
|
Samir Sobhy Ayad
|
|
|
| # |
details |
| 1 |
Design and manufacturing of Air Handling Units in cooperation with Rosenberg
Ventilation Company of Germany.
|
| 2 |
Design and testing of Flat Plate Solar Collectors and Thermal Storage for Solar Hot
Water Systems for Egyptian Solar Energy System Company at October 6th City, First
Industrial Zone, Phone +2 02-38331201.
|
| 3 |
Modeling of Vortex Augmented Wind Energy Systems At Solar Energy Research Institute
( Presently National Renewable Energy Laboratory NREL, Colorado, USA )
|
|
|
|
Sayed Abd elwanis Abd alla
|
|
|
|
|
Sayed Ahmed Abdel-Moneim
|
|
|
| # |
details |
| 1 |
1. Professor, Mechanical Eng. Dept., Shoubra Faculty of Eng., Cairo, Egypt , Benha Univ., (2013 – up to now).
2. Professor, and Vice Dean of the Faculty of Engineering, Northern Border University, (NBU), Arar- Kingdom of Saudi Arabia, KSA, (Sept. 2010 - 2013).
3. Professor, and Head of Mechanical Eng. Dept., Faculty of Eng., Northern Border Univ. (NBU), Arar- Kingdom of Saudi Arabia, KSA, (Sept. 2008 - Aug. 2010 ).
4. Professor, Mechanical Eng. Dept, Faculty of Eng., Garyounis Univ., Lybia, (2005-2008).
5. Professor, Mechanical Eng. Dept., Shoubra Faculty of Eng., Cairo, Egypt , Benha Univ., (March 2004 - 2005).
6. Visiting Professor, Mechanical Eng. Dept., Strathclyde Univ., Glasgow, UK, (March-September 2000).
7. Associate Professor, Mechanical Eng. Dept., Shoubra Faculty of Eng., Zagazig Univ., Cairo, Egypt ( 1998-March 2003).
8. Lecture, Mechanical Eng. Dept., Shoubra Faculty of Eng., Zagazig Univ., Cairo, Egypt ( 1992-1998).
9. Associate Lecture, Mechanical Eng. Dept., Shoubra Faculty of Eng., Zagazig Univ., Cairo, Egypt ( 1989-1992).
10. Research Assistant, Mechanical Eng. Dept., Shoubra Faculty of Eng., Zagazig Univ., Cairo, Egypt ( 1984-1989).
|
|
|
|
Sherif Hady Taher Eisa
|
|
|
|
|
Tarek Ahmed Fouad Khalifa
|
|
|
| # |
details |
| 1 |
Consultation services for metallurgical industries at EL-Obour City and Tenth of Ramadan. |
|
|
|
Yehia Abdel-Azim Al-Mashad
|
|
|
|
|
Ahmed Attia Abd El_Latief Attia
|
|
|
| # |
details |
| 1 |
|
| 2 |
|
| 3 |
Computer Aided design tools (Cad Cam) –Solid work (engineering Drawing software ),
Experience in industrial control and measuring system using data acquisition cards and programming using Lab-view software in simulation, control and design.
Joined in Team work for Electric Bus Project issued from UNDP to SFD Egypt, American part representative tell now
Joined in Teamwork for Electric Bus Project (AFICO representative) for installation, operation, and maintenance in Luxor site for (Social Fund for Development and Ministry of Antiques) for two years.
A member of consultant committee for inspecting Boiler at National Institute of Eyes, Rode El_Farag Cairo, Egypt. Under Recommendation of Faculty of Engineering, Banha University.
Participate as A member of the Shoubra Faculty of Engineering, team for sharing in Banha University Local Annual Week for Environmental and Society Service for years 2006,2007,2008,2009
A member of Environmental Committee for Shoubra Faculty of Engineering. Banha Univ.
Sharing in Egypt-Japan Conference on Environment and Construction, Cairo, Arab Republic of Egypt, March 2009, under recommendation from Faculty of Engineering Shoubra Faculty Engineering.
A Training Course in “ Environmental Management for Air and water Pollutants” National Research Center , 2007
A member of consultant committee for modification and reconstruction to be environmental for stack of medical waste sanitary of National Institute of Eyes, Rode El_Farag Cairo, Egypt. Under Recommendation from Faculty of Engineering, Banha University.
Supervisor on the B.Sc. projects entitled “PEM and MCFC Fuel Cell “ for year 2006,2008,2009 |
|
|
|
Ahmed Abdel Azim Ahmed
|
|
|
|
|
Ahmed Reda Mohamed Ali El Shami
|
|
|
|
|
Al_sayed Fahmi Atwan
|
|
|
|
|
Hassanein Abdelmohsen Hassanein Refaey
|
|
|
|
|
Karam Mahmoud Hassan El-Shazly
|
|
|
| # |
details |
| 1 |
Fire Fighting systems include Fire extinguishers, FM200, CO2 system, wet riser system having sprinkler system(upright and pendent) as well as Dry riser system . |
| 2 |
HVAC systems include central air conditioning(Chilled water and DX) systems, split, package and mechanical ventilation systems. |
| 3 |
Our experiences are designing HVAC systems (Heating, Ventilation, and Air Conditioning ) and Fire fighting systems, as well as the coordinator for Electro-Mechanical systems such as (Plumbing systems, Electrical systems besides HVAC and Fire Fighting System). |
| 4 |
Plumbing systems include domestic cold/hot water system, foul drainage system, storm water system and site irrigation system, |
| 5 |
Electrical systems include power supply to the building, UPS system, lighting system, fire alarm system, paging system, Sound or sound and image system and data-telephone system. |
|
|
|
Maha Mahmoud Aly Lashin
|
|
|
|
|
Mohamed Ahmed Mohamed Kayedbay Mohamed Moawed
|
|
|
| # |
details |
| 1 |
9.1 Consultation:
Considerable experience has been established in the field of Consultation of QMS systems, EMS and CE mark. This was achieved through EQE consultancy approach, for upgrading and implementation ISO 9000 standard.
Typical relevant clients include:
1- Hourous For shipping and transport.
2- High Institute for Agriculture.
3- Elsoufi Company.
4- ElMotaheda for Agriculture.
5- General Motors.
6- Eysis for Agriculture.
7- Elshely for clothes.
8- Elsawra Company.
9- Swilam company.
10- Gastech company.
11- Amoon for Medicine.
12- Arabaize for Computer.
13- Harf for Computer.
14- ElShehsaay for Clothes.
15- Dimode for Clothes.
16- Yoromode for clothes.
17- Power Egypt for Air conditioning.
18- Red sea Marin company.
|
| 2 |
These consultation processes include:
1) Gap analysis
2) Training
3) System documentation and construction
4) System implementation
5) Internal audit
|
|
|
|
Nabil Mohamed Shafik Abdel-Azim Berbish
|
|
|
|
|
Ragab Khalil Ali Khalil
|
|
|
|
|
Reda Ibrahim Ahmed Mohamed Afify
|
|
|
|
|
Saber Mahmoud Abdrabbo
|
|
|
|
|
Samah Samir Mohamed Hasanin
|
|
|
|
|
Tamer Samir Mahmoud Abdel-Magid
|
|
|
|
|
Ahmed Omar Mosleh Omar
|
|
|
|
|
Hany Al-Sawy Abdel-Rahman
|
|
|
|
|
Ismail Mahmoud Metwally Alsedik El semary
|
|
|
|
|
Mahmoud Mohamed Elsamanty
|
|
|
|
|
Mohamed Ahmed Abd Elrahman Ahmed
|
|
|
|
|
Mohamed Elsayed Mohamed Emam ALi
|
|
|
|
|
Mohamed Reda Aly Abd-Elhamid Salem
|
|
|
| # |
details |
| 1 |
Energy Efficiency |
| 2 |
Refrigeration Cycles |
| 3 |
Desalination |
| 4 |
Heat & Mass Transfer Applications |
| 5 |
Heat Exchangers |
| 6 |
Measurements & Instrumentation |
| 7 |
Renewable Energy |
| 8 |
Thermal Analysis & Control |
|
|
|
Mohammed Gamil Mohammed Abdelghany
|
|
|
|
|
Mostafa El Sayed Abd-Elmonem
|
|
|
|
|
Tamer Abdel-Fattah Abdel-Raouf Khalil
|
|
|
|
|
Abdel-Halim Abdel-Mohsen Mahmoud Al-Akbawi
|
|
|
|
|
Abdelkariem Karam Abdelkariem Mohamed
|
|
|
|
|
Ahmed A. Serageldin
|
|
|
|
|
Ahmed Abdelfattah ElSadek
|
|
|
|
|
Ahmed Ali Altohamy
|
|
|
|
|
Ahmed Karam AbdelFattah Mostafa
|
|
|
|
|
Ahmed Mohamed Salah Kandil
|
|
|
|
|
Aly Mohamed Ahmed Soliman
|
|
|
|
|
Amr Monier Abd Elaleem Ibraheem
|
|
|
|
|
Ashraf El-sayed Abdel-Aleem
|
|
|
|
|
Asmaa Mostafa Rabie Khalil
|
|
|
|
|
Aziza Amen Sherif
|
|
|
|
|
Baiumy Taha Abdel-Moati El-Assal
|
|
|
| # |
details |
| 1 |
• Refrigeration & air conditioning. |
| 2 |
• Engineering Consulting in the electro-mechanical works |
| 3 |
• Sewage Treatment. |
| 4 |
• Solar Collector Systems and Performance. |
| 5 |
• Thermal Power Plants. |
| 6 |
• Thermal storage systems. |
|
|
|
Bilal Abdul-Karim Salem
|
|
|
|
|
Doaa Mahmoud Abdel-Fattah Ads
|
|
|
|
|
El-Awady Attia
|
|
|
|
|
El-sayed Hamzah Mansour Abd-el hadi
|
|
|
|
|
Gerges Edwar Mehanny Beshay
|
|
|
|
|
Hamdy El-Sayed Mohamed El-Sayed
|
|
|
|
|
Hamid Farag Hamed Saber
|
|
|
|
|
Hend yasin Mohamed Al-Tantawi
|
|
|
|
|
Islam Hussein Elsayed Hussein Sakkr
|
|
|
|
|
Khalid Abdel Wahab Mahmoud Ibrahem
|
|
|
|
|
Magdy Rashwan Ibrahim
|
|
|
|
|
Maha Fathi Abdullah El-Sangaree
|
|
|
|
|
Mahmoud Abdelrahman Khedr
|
|
|
|
|
Mahmoud Ahmed Ahmed Hassan Sharaf Eldin
|
|
|
|
|
Mamdouh Wafaa Shawky Hefny
|
|
|
|
|
Mina Gamal Mourad Abd Elmalek
|
|
|
|
|
Mohamed Abdel-Salam Fahmi El-Dessouky
|
|
|
|
|
Mohamed Elsayed Abdelaty Elsayed Ahmed
|
|
|
|
|
Mohamed Hassan Shehata
|
|
|
|
|
Mohamed Ibrahim Mohamed Emam
|
|
|
|
|
Mohamed Saber Ahmed Ibrahim Sokar
|
|
|
|
|
Mohammed Hani Mahmoud Abdel-Maksoud
|
|
|
|
|
Mostafa Abdel-mohimen Hussein
|
|
|
|
|
Nadia Hamzawy Mohamed
|
|
|
|
|
Rasha Afify
|
|
|
|
|
Rasha Mohamed Elsayed Afify
|
|
|
|
|
Saber Ragab Abd Allah
|
|
|
|
|
Samer Anwar Beskales Agaiby
|
|
|
| # |
details |
| 1 |
My main research interests are in the field of Fluid Mechanics and Computational Fluid Dynamics.
• Turbulent Flow Modeling Using CFD Program Packages.
• Active and Passive Control of Turbulences wakes.
• Boundary Layer Separation behavior
• Effect of surface roughness on drag force reduction
• Super hydrophobic surfaces
• Investigating flow characteristics over airfoils shapes.
• Estimating the turbo machinery efficiency using CFD techniques
|
|
|
|
Zakaria Ahmed Mohamed Behairy
|
|
|
|
|
Abanoub Zaki Abdel-malak Zaki
|
|
|
|
|
Ahmed Mohi Mohamed Ahmed
|
|
|
|
|
Ali Mohammed Ismail Elgazzar
|
|
|
|
|
BASEM RAGAB MOHAMED MOHAMED
|
|
|
|
|
Ehab Abdel-Azim Awad
|
|
|
|
|
Elhaitham Mustafa Elshahat Mustafa
|
|
|
|
|
Hassan Ali Selim Ali Elshokrofy
|
|
|
|
|
Helal Anwar Elgammal
|
|
|
|
|
Hesham Zaghloul Abdelhameed Mostafa
|
|
|
|
|
Ibrahim Mahmoud Mohamed Mohamed Shahin
|
|
|
| # |
details |
| 1 |
Good experience with Ansys-fluent CFD package in simulating:-
• Fluid flow problems
• Heat Transfer, Multi phase flow models and Combustion models
• Turbo machines “ Unsteady Rotor- Stator Interaction RSI”
• Combustion
Good experience with Design, Drawing and Grid generation software:-
• Gambit Software
• ICEM CFD
• Blade generator
• Turbo-Grid
• CF Turbo “ Centrifugal turbo machine design software”
|
| 2 |
I taught the following courses for Under graduat ‘ from 2005 to 2012’:-
• Turbo Machines
• Hydraulic Machines
• Fluid Mechanics – Fluid Dynamics
• Fluid Power
• Heat Transfer
• Trainer for CFD course “FLUENT Software”
• Engineering Drawing.
• Axial and Centrifugal compressors ‘Post graduat 2012’ |
| 3 |
I taught the following training courses for Kuwait Oil Company KOC field engineers :-
• Pumps maintenance and troubleshooting.
• Gas compressors operation and maintenance
• Oil Field Water Treatment Course
• Maintaining pumps course
• Protection relay maintenance application & testing.
• Failure Analysis Methodologies for Mechanical Engineers
• Gas Lift Management
• Purging procedures in Booster Stations
• Construction Management
• Valves( Selection, Maintenance and repair)
|
| 4 |
• CFD simulation for a turbo-prop gas turbine engine components “compressor, combustor, turbine and free turbine”
• Improving the performance for multistage centrifugal pumps for IMPOAS
pump company, using FLUENT for predict pump performance curve
• Using FLUENT software for predict the cause of erosion Problem in a T spool,
KARONE Petroleum Company.
• CFD analysis for medium volt electric cable surface temperature in an
Underground duct bank raceway for Suez Steel factory.
• Using FLUENT software for predicting and enhancing air and CO2 distribution
in underground car park, SHAKER consultant.
|
| 5 |
• Provide the appropriate technical guidance and support in preparation of all “mechanical process” projects deliverables including calculation reports, design drawings, BOQ's, technical specifications, shop drawings and as built drawings.
• Review and approve all “mechanical process” current projects deliverables including calculation reports, design drawings, BOQ's, technical specifications, shop drawings and as built drawings.
• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements.
• Perform overall quality control of the work (schedule, plans, and personnel’s performance) and report regularly on project status.
• Assign responsibilities and mentor project team.
• Cooperate and communicate effectively with project manager, in house project team and other project participants to provide assistance and technical support.
• Review engineering deliverables and initiate appropriate corrective actions.
• Familiar with: Plant design “ Power plant, oil & gas plants”, Mechanical systems design, P&IDs, Piping 3d modeling.
• Familiar with codes for design and construction of mechanical systems (ASME, ANSI, …etc)
• Experienced in using CFD software programs like ANSYS, and knowledge in various computer programs.
|
|
|
|
Ibrahim Reda Ibrahim Youssef Awad
|
|
|
|
|
Islam moustafa kamel
|
|
|
|
|
Mahmoud Ismail Ahmad Al-Gazzar
|
|
|
|
|
Mohamed Ahmed Hassaan Ahmed
|
|
|
|
|
Mohamed Fouad El-sherbiny El-sayed
|
|
|
|
|
Mohamed Mohy Mohamed Abdalhadi
|
|
|
|
|
Mohamed Nasser Mohamed Owyed
|
|
|
|
|
Mostafa Mohamed Mokhtar Mohamed
|
|
|
|
|
Muhamad Abd El-Fatah Hamouda Soliman
|
|
|
|
|
Mustafa Orban
|
|
|
| # |
details |
| 1 |
Demonstrator at mechanical department shoubra faculty of engineering banha university ▪ dean@feng.bu.edu.eg ▪ 108 shobrua street Cairo Egypt ▪ fax :11629 |
| 2 |
As Soc team manager for top quality for security that worked for Orange company for communication Tel: 01227773366 |
| 3 |
General Manager at el Gharbi for animal food 105 sembo elkobra zifta gharbia |
|
|
|
Mustafa Mohamed Mahmoud Okasha
|
|
|
|
|
Omar Abd Elmotaleb Abd Elzaher Ali
|
|
|
|
|
Omar Emad Galal Ahmed
|
|
|
|
|
Ramy Gadallah
|
|
|
|
|
Said Abd Elkerem Mustafa
|
|
|
|
|
Abdullah Omar Mohamed Abou Reasha
|
|
|
|
|
ahmed abd elftah moustafa kamel elsadek
|
|
|
|
|
Ahmed Mohamed Ahmed Mahmoud Abdalkareem
|
|
|
|
|
Ahmed Saaed Mohamed Alam
|
|
|
|
|
Andrew Ayman Fikry Fouad
|
|
|
|
|
Ayman Karam Shehatah Ali
|
|
|
|
|
Islam Othman Mohamed
|
|
|
|
|
mahmoud Gamal Abdalnasser
|
|
|
|
|
Mahmoud zarif mohamed amin
|
|
|
|
|
Mohamed Fakhr El deen
|
|
|
|
|
Mohamed Hassan Hassan Elsayed
|
|
|
|
|
Mohamed Khaled Ahmed Hamed Saudi
|
|
|
|
|
Mohamed Zaki Ismail
|
|
|
|
|
Mohammad Mahmoud Daif Mohammad
|
|
|
|
|
Mostafa Mahmoud Galal Zaki
|
|
|
|
|
Mustafa Mahmoud Mohammed Hassan
|
|
|
|
|
Tamer Ramadan Hassan Badawi
|
|
|
|
|
Ashraf Ahmed Lashin
|
|
|
|
|
Ibrahim moussa Ibrahim
|
|
|
|
|
Khairy Hussein Mustafa El Najjar
|
|
|
|
|
Mamdouh Esmat Abdel-Ghani
|
|
|
|
|
Mamdouh Mohamed El-Sayed Soliman
|
|
|
|
|
Mervat Tawfik Mahmoud Abd Elrahman
|
|
|
|
|
Mohamed Hamdi Gooda Ghaith
|
|
|
|
|
Tarik Mohamed Tawfeek
|
|
|
|
|
Abdul Salam Hamid Hussein Badr
|
|
|
|
|
Ahmed Mohamed Abdelhamed Ghaith
|
|
|
|
|
Atef Abdel-azim Aly Mohamed
|
|
|
|
|
Hisham Morsi Abdel-Rahman Tantawi
|
|
|
|
|
Iman Mahmoud Mohamed Elkomy
|
|
|
|
|
Mohamed Hussien Bayuomi
|
|
|
|
|
Rady Mohamed Ahmed Sleim
|
|
|
|
|
Raouf Tawfik Fahmy
|
|
|
|
|
Said Wahba Shehata
|
|
|
|
|
Sami Ali Ahmed Al Qadi
|
|
|
|
|
Seyed Ali Zian Ali
|
|
